Handleiding Olimpia Splendid MIA 2 9 (pagina 21 van 60) (Duits, Engels, Frans, Italiaans, Spaans)

703016

Verklein

Vergroot

Pagina terug

1/60

Pagina verder

7.3 Cleaning the surfaces

To clean the surfaces, use a rag dampened with water or with water and a neutral de-

tergent.

7.4 Cleaning the metal parts

To clean the metal parts of the stove, use a soft cloth dampened with water.

Never clean the metal parts with alcohol, thinners, petrol, acetone or other degreasing

substances. If such substances are used, our company declines any responsibility.

Eventual variations in the colour of the metal parts can be caused by an incorrect use

of the stove.

Fig. 11 Fig. 12

Fig. 13 Fig. 14

Fig. 15

7.5 Cleaning the brazier and brazier support

When the ﬂame assumes a red colour or seems weak, and is accompanied by black

smoke, this means that there are ash deposits or incrustations that do not permit the

correct functioning of the stove and that must be removed (ﬁg. 25a-25b).

Remove the brazier every day by simply raising it from its slot; then clean out the ashes

and eventual incrustations that may have formed, paying particular attention to liberating

the holes by using a pointed tool (not included with the stove)

This operation is made particularly necessary before every lighting the ﬁrst several times

and above all if using pellets that differ from those supplied by our company. The fre-

quency of this operation is determined by how frequently the stove is used and the

choice of pellets. It is also a good idea to check the brazier support, vacuuming the even-

tual ash present.

7.7 Ash box

Open the door and extract the ash box (Fig. 26). Use a vacuum to remove all the ash de-

posited within. This operation must be performed more or less frequently depending on

the quality of the pellets used.

7.8 Cleaning the glass

The glass is a self cleaning type, therefore, while the stove is working, a veil of air is

blown across its surface to remove ash and dirt; nevertheless over a period of several

hours, a greyish patina tends to form which should be cleaned when the stove is next

shut down. How dirty the glass becomes also depends on the quality and quantity of

pellets used. Cleaning the glass should be done when the stove is cold with products

recommended and tested by our company.

When perf

orming this operation, always check that the grey seal around the glass is in

a good state; failure to check the efﬁciency of this gasket can compromise the function

of the stove. Poor quality pellets can, in any case, cause the glass to become dirty.

7.9 Cleaning the clearing system

Until a reasonable experience is acquired regarding the operating conditions, it is advi-

sable to perform this maintenance on at least a monthly basis.

• Remove the electrical feed cable;

• Remove the cap from the T-joint and proceed with the cleaning of the ducts. If neces-

sary, at least for the ﬁrst few times, call in qualiﬁed personnel;

• Carefully clean the smoke discharge system: for this, contact a professional chimney

sweep;

• Once a year clean the dust, cobwebs, etc. from the zone behind the internal covering

panels, paying particular attention to the fans.

Fig.25a Fig.25b

Fig.23 Fig.24

The use of aggressive detergents or thinners can damage the sur-

faces of the stove. Before using any detergent it is advisable to try

it on a small section out of sight or contact the Authorized Assi-

stance Centre for information regarding the product.

WARNING! Periodically remove and empty the cap of the inspection

"T" pipe located behind the stove (see picture 23 and 24). The lack

of cleanliness can prevent the starting of the stove, causing dama-

ges to the stove itself and to the environment (possible emission of

unbrunt material and soot). Do not re-use the pellet possibly remai-

ned in the brazier due to no starting-up.

Fig. 26

WARNING!

If the glass is broken, do not attempt to light the stove.

ATTENZIONE:

the furnace and ash drawer must be cleaned every day and prior to

each powering-on. Cleaning must consist in the complete removal

of all residue.

The lack of cleanliness can prevent the starting of the stove, causing

damages to the stove itself and to the environment (possible emis-

sion of unbrunt material and soot).

Do not re-use the pellet possibly remained in the brazier due to no

starting-up.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Olimpia Splendid MIA 2 9 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info