492991
53
Verklein
Vergroot
Pagina terug
1/203
Pagina verder
Connecting to a Computer
-53-
Setup
1
Install a Printer and Fax Driver
(for Windows)
To complete the network connection with a
Windows computer, first set IP addresses for the
machine, and then install a printer and fax driver
on the computer.
If there is no DHCP server or BOOTP server on
the network, you need to manually configure the
IP address on the computer or machine.
Your network administrator or Internet service
provider specifies a unique IP address for the
computer and your machine. Set the IP
addresses manually.
You need to complete the network setting of the computer
before this procedure.
To complete this procedure, you must be logged in as an
administrator.
When setting an IP address manually, ask the network
administrator or your Internet service provider which IP
address to use. If the IP address is set wrong, the network
may go down or Internet access may be disabled.
Memo
If configuring a small network consisting of only your
machine and a computer, set IP addresses as shown below
(according to RFC1918).
To set [Network Scale], press the <SETTING> key and
then select [Admin Setup] > [Network Menu] >
[Network Setup] > [Network Scale].
First, Set the IP address of the machine.
1 Hold down the power switch for about a
second to turn on the power.
2 Press the <SETTING> key on the
operator panel.
3 Press the to select [Easy Setup], and
press .
4 Enter the administrator password.
The factory default password is "aaaaaa".
5 Select [Complete], and press .
6 Press the and [Network Setting],
and then press the .
7 If setting the IP address manually, check
that [Manual] is selected, and press .
If obtaining the IP address automatically, press
the and select [Auto], and press . Proceed
to step 12.
8 Enter the IP address and press .
To move to the next box, press the .
9 Enter the subnet mask and press .
To move to the next box, press the .
10 Enter the default gateway address and
press .
To move to the next box, press the .
11 Enter the DNS server and WINS server if
needed.
If it is not necessary to connect the DNS server or
WINS server to the network, press until the
pop-up message showing the setting completion is
displayed.
12 When the setup menu screen is
displayed, press to complete the
setup.
For the computer
IP address : 192.168.0.1~254
Subnet mask : 255.255.255.0
Default gateway : not used
DNS server : not used
For the machine
IP address Set : Manual
IP address: 192.168.0.1~254 (select a dif-
ferent value from the com-
puter)
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
Network Scale : Small
OK
OK
OK
OK
OK
OK
OK
OK
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oki ES4191 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oki ES4191 in de taal/talen: Engels als bijlage per email.

De handleiding is 25,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Oki ES4191

Oki ES4191 Gebruiksaanwijzing - Nederlands - 222 pagina's

Oki ES4191 Gebruiksaanwijzing - Nederlands - 200 pagina's

Oki ES4191 Gebruiksaanwijzing - Deutsch - 229 pagina's

Oki ES4191 Gebruiksaanwijzing - Deutsch - 210 pagina's

Oki ES4191 Gebruiksaanwijzing - English - 182 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info