44
GB
Electrical connection
This refrigerator is designed to
operate on a 230 V AC (
~
) 50 Hz
supply.
The plug must be put into a socket
with protective contact. If there is no
such, it is recommended to get an
electrician to fit an earthed socket in
compliance with standards near the
refrigerator.
This appliance complies with the
following E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage
Directive) and subsequent
modifications,
89/336 EEC of 03.05.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.
96/57 EEC - 96/09/03 (Energy
Efficiency Directive) and its
subsequent amendments
left side and put them to the other
side. (fig. 2)
Fit the pin of the double door hinge
(m) into the left drill of the freezer door.
(fig. 2)
Fit the freezer door to the lower door
hinge pin (f). (fig. 3)
Fit the refrigerator door to the upper
door hinge pin (d) then slightly tilting
both doors fit the pin of the double
door hinge (m) into the left drill of the
refrigerator door.
Opening both doors fix the double
door hinge onto the left side using the
screws (2 pieces) (c). Do not forget to
replace the plastic spacer (b) under
the hinge. Be carful that the door
edges are parallel with the edge of the
mantle.
Put over the handles (r) on the other
side and put the plastic covering nails
(p) supplied in the plastic bag of this
instruction book into the holes set
free. (fig. 4)
Put the appliance to its place, set it
level, and apply to voltage it.
In case you do not want to perform the
procedures above, call the nearest
brand-mark service. Technicians will
accomplish the refitting expertly for
charge.
