710805
266
Verklein
Vergroot
Pagina terug
1/416
Pagina verder
Manage Device Security
266
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
8. Specify the following settings:
Port Control. Defines the port authorization state. The control mode is set only if the
link status of the port is link up. Select one of the following options:
- Auto. The switch automatically detects the mode of the interface.
- Authorized. The switch places the interface into an authorized state without being
authenticated. The interface sends and receives normal traffic without client
port-based authentication.
- Unauthorized. The switch denies the selected interface access by moving the
interface into unauthorized state. The switch cannot provide authentication
services to the client through the interface.
- MAC based. Multiple supplicants connected to the same port are allowed to be
authenticated individually. Each host connected to the port must de authenticated
separately to gain access to the network. The hosts are distinguished by their
MAC addresses.
MAB. Specify whether to enable or disable MAC-based Authentication Bypass (MAB)
for 802.1x-unaware clients at the specified port. MAB only functions if the port control
mode is MAC-based. By default, MAB is disabled.
Guest VLAN ID. Specify the VLAN ID for the guest VLAN. The valid range is 0–4093.
The default value is 0. Enter 0 to reset the guest VLAN ID on the interface. The guest
VLAN allows the port to provide a distinguished service to unauthenticated users.
This feature provides a mechanism to allow users access to hosts on the guest VLAN.
Guest VLAN Period. Specify the number of seconds that the selected port remains in
the quiet state following a failed authentication exchange. The guest VLAN time-out
must be a value in the range of 1–300. The default value is 90.
Unauthenticated VLAN ID. Specify the VLAN ID of the unauthenticated VLAN for the
selected port. The valid range is 0–3965. The default value is 0. Hosts that fail the
authentication might be denied access to the network or placed on a VLAN created
for unauthenticated clients. This VLAN might be configured with limited network
access.
Periodic Reauthentication. Select Enable to allow periodic reauthentication of the
supplicant for the specified port.
Reauthentication Period. Specify the time, in seconds, after which reauthentication
of the supplicant occurs. The reauthentication period must be a value in the range of
1–65535. The default value is 3600. If this field is disabled, connected clients are not
forced to reauthenticate periodically.
Quiet Period. Specify the number of seconds that the port remains in the quiet state
following a failed authentication exchange. While in the quite state, the port does not
attempt to acquire a supplicant.
Resending EAP. Specify the EAP retransmit period for the selected port. The
transmit period is the value, in seconds, after which an EAPoL EAP Request/Identify
frame is resent to the supplicant.
Max EAP Requests. Specify the maximum number of EAP requests for the selected
port. The value is the maximum number of times an EAPoL EAP Request/Identity
message is retransmitted before the supplicant times out.
266

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Netgear GC110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Netgear GC110 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info