Filters and maintenance
5. Insert the metal grease filters (see
"Removing and inserting the metal
grease filters").
6. Cancel the
J b in the display.
❑ Press the
J button.
Saturation indicator:
U
b
When the activated carbon filter reaches
saturation point, an acoustic signal is
sounded for 6 seconds after the fan has
switched off, and a
J b appears in the
display. The activated carbon filter should
be replaced straight away.
Replacing the activated carbon filter:
❑ During normal operation (1 to 2 hours
per day) the activated carbon filters
should be replaced approximately 1 x
year.
❑ A replacement filter can be obtained
from any authorized dealer (see optional
accessories).
❑ Use original filters only.
By doing so you will obtain maximum
performance from your extractor hood.
Disposing of the old activated carbon
filter:
❑ There are no pollutants in the activated
carbon filters. They can therefore be
disposed of as part of your normal
domestic refuse.
Activated carbon filter:
For neutralizing odours in recirculating
mode.
Caution:
As the filter becomes more and more
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.
Important:
Change the activated carbon filter promptly
to prevent the risk of fire from the
accumulation of heat when deep-fat frying
or roasting.
Inserting the filter:
Warning: The halogen bulbs must be
switched off and cool.
ṇ Before changing the grease filters,
ensure that the filter drawer has been
pushed in.
1. Remove the metal-mesh filters
(see "Removing and inserting the metal-
mesh grease filters").
2. Remove the air conduction plate.
3. Insert the activated carbon filter.
The catches at the side must lock into
position.
22
4. Re-insert the air conduction plate.
The catches at the side must lock into
position.
