779576
22
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
22
8.6 Switching Between the Speakerphone, Handset and Headset Mode
1. To switch to the speakerphone mode, press s. The speakerphone indicator illuminates. Place
the corded handset back into the cradle.
2. To switch to the corded handset, pick up the handset. The speakerphone or wired headset
indicator will turn o.
3. To switch to the headset, press HEADSET to enable the headset, and the headset indicator
illuminates.
8.7 Mute
To have a private, o-line conversation, use the Mute feature. The party on the other end of the
line cannot hear you, but you can still hear them.
1. During a call, press MUTE to activate the Mute feature.
2. Press MUTE again to de-activate.
NOTE
The Mute LED indicator will illuminate when the Mute feature is activated.
8.8 Do Not Disturb (DND)
This feature will disable your telephone’s ringer for a set period of time to prevent incoming calls
from interrupting. When an incoming call or intercom call occurs, the status indicators will light up
but the phone will not ring.
1. In idle mode, press DND/PRIVACY. The last setting is displayed.
2. Using VOL + and VOL - of the navigation button to scroll to your selection. You can choose
from as short as
15 MINUTES, 30 MINUTES, 45 MINUTES, 1 HOUR
or
2 HOURS
and increase the
duration by 1-hour intervals up to
24 HOURS
.
3. Press
SELECT
softkey to save your selection. The indicator on the base will blink and a DND
timer will appear on the display indicating how much time remains before the DND feature is
automatically turned o.
4. To turn o DND feature at any time, press DND/PRIVACY.
8.9 Line Privacy
This feature will prevent other phones on the same system from accessing the line used by your
active call.
To turn on Line Privacy:
1. While on a call, press DND/PRIVACY.
2. The screen will display
PRIVACY
.
8.10 Flash
If you subscribe to Call Waiting Caller ID service from your local telephone company and you
receive an incoming call during a call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information (if available) for the waiting call shows on the display.
1. To connect to the waiting call, press FLASH and your first call will be put on hold.
2. To switch between the two calls, press FLASH.
8.11 Inserting a Pause in the Dialing Sequence
Press j twice to insert a delay in dialing sequence when a pause is needed to wait for a dial
tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone). Each
pause counts as one digit in the dialing sequence, and is shown as
P
in the display.
8.12 Redial
1. Pick up the handset, press s or HEADSET and the base will select the first available line. If
both lines are available, Line 1 will be used first.
Or, press LINE 1 or LINE 2 button to select the line you want.
2. Press REDIAL. The redial number list (last 3 previously dialed numbers) is shown.
3. Using VOL + and VOL - of the navigation button to scroll to the number you want to redial.
4. Press
DIAL
softkey to dial the phone number.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Motorola ML25254 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Motorola ML25254 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info