68107
17
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
Advanced settings 17
EN
Set a number to be barred
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
CALL BARRING
. Press m.
3.
Enter the master PIN (default setting 0000) and press m.
4.
Scroll d to
NUMBER
. Press m.
5.
If necessary, scroll u or d to the next available slot.
6.
Press m and enter the number or prefix you want to bar. Press m
to confirm.
7.
Press > to return to standby.
Baby call
When activated, this feature allows you to dial a number by pressing any key on your handset
(except >). This feature is very useful for access to emergency services.
Switch baby call on/off
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
BABY CALL
. Press m.
3.
Enter the master PIN (default setting 0000) and press m.
4.
MODE
is displayed. Press m then press u or d to select
ON
or
OFF
. Press m to confirm.
5.
Press > to return to standby.
NOTE
If you switch Baby call on,
BABY CALL ON
will be displayed on your screen in standby mode.
To switch Baby call off again:
1.
Press >.
2.
OFF?
is displayed. Press m to confirm.
Set the baby call number
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
BABY CALL
. Press m.
3.
Enter the master PIN (Default setting 0000) and press m.
4.
Scroll d to
NUMBER
. Press m.
5.
Enter the number. Press m to confirm
6.
Press > to return to standby.
Dial a baby number
1.
When a baby call number has been stored and the baby call setting switched on, press any
key (apart from >), to dial a number.
NOTE
When baby call is switched on, you can still answer any incoming call as normal.
Registration
Up to 5 handsets can be registered to one base station. Additional handsets must be registered
to the base before you can use them.
• The instructions described below apply specifically to your D711 handset. If you wish to
register another manufacturer’s handset, the instructions may vary. In this case, please refer to
the manufacturer of the additional handset.
• The Master PIN is required before you can register or unregister handsets. The default PIN is
0000
.
Register a handset
At the base:
1.
Press and hold the p button on the base station for at least 3 seconds. The base station
emits a beep when it is ready to accept registration. You have 90 seconds in which to register
a handset.
At the handset:
1.
Press m and scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
REGISTRATION
and press m.
3.
If necessary, scroll u or d to display
REGIST. BASE
and press m.
BASE 1 2 3 4
is displayed and
the registered base number is flashing. Enter the number of the base on which you wish to
register your handset.
If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc.
4.
When the display shows
PIN
----, enter the base PIN.
- When the handset registers with the base, it is assigned a handset number.
Select a base
You can register your D711 handset with up to 4 bases. Once registered, you can switch between
bases, for example, bases at home and at work.
1.
Press m and scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
REGISTRATION
and press m.
3.
SELECT BASE
is displayed. Press m.
- The available bases are displayed with the current base number flashing.
4.
Enter the number of the base you want – 1,2,3 or 4 and press m.
- When the base is found you hear a beep. If not found, the display shows
UNREGISTERED
.
Unregister a handset
1.
Press m and scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
UNREGISTER
and press m.
3.
Enter the 4 digit master PIN and press m.
- Display shows the registered handset numbers.
4.
Scroll u or d to select the handset you want to delete and press m.
-
UNREGISTERED
is displayed on the handset screen.
PIN
The 4-digit master PIN is used when registering or unregistering a handset and when changing
some settings on your D711. The default setting is 0000. You can change this PIN for more
security.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
PIN
. Press m.
3.
Enter the current 4 digit master PIN and press m. (Default setting 0000)
4.
Enter the new PIN and press m.
D711_IFU_EN_for_EU.book Page 17 Friday, August 24, 2007 3:58 PM
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Motorola-D712

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Motorola D712 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Motorola D712 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 17,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Motorola D712

Motorola D712 Gebruiksaanwijzing - English - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info