10 | Midland G5 C user manual
Vox
Your G5 C has 4 VOX levels (o, 1, 2, 3, and 4). This function allows the user
to activate the communication without pressing the PTT button. You just have
to speak and the communication is on.
You can set the VOX on 3 levels, with or without accessories.
The fourth level activates the VOX with Talkback function: when one of the
two devices transmit for more than 20 seconds, the VOX Talkback stops the
transmission for 10 seconds; so the other user has himself the opportunity to-
talk.
To set the VOX level, press the MODE button, until the display shows “Vo of”
and “VOX” flashing in the upper side of the display. After that, with the scroll
buttons ▲▼, select “1”,”2”,”3” or “4”.
To confirm, press the PTT button or wait for 5 seconds.
To disable the VOX function, follow the previous indications, but select “oF”
and then push the PTT key to confirm.
Beep Tone
This function permits you to produce a beep tone every time you press a but-
ton.
If you want to disable this function, press the MODE button until the display
shows “bp on”, then select by the scroll buttons ▲▼ “bp of”. To confirm,press
the PTT button or wait for 5 seconds.
In this way, all “beeps” and “tones” are disabled.
To re-enable this function, repeat the procedure selecting the “bp on” using
the scroll buttons ▲▼ and confirm by pressing the PTT button or wait for 5
seconds.
Roger Beep (end of transmission tone)
When the PTT button is released, the radio will beep to confirm to other users
that you’ve finished your transmission and that they can begin to talking. To
turn the ROGER BEEP on, press the MODE button till the display shows “rb
of”; then by the scroll buttons ▲▼, select “rb on”.
To confirm, push the PTT button or wait for 5 seconds.
To disable this function, repeat the procedure selecting the “rb of”.
