152
9.1.2 Manual zoom mode
The zoom position of the reflector must be adjusted
manually to the lens focal length when used with a
camera that doesnít transmit the data related to the
lens focal length.
In this case auto-zoom mode is not possible!
Setting procedure
• Press the button and the menu
will appear.
• Use the buttons to select .
• Press the ° button and open the menu.
• Use the buttons to select a zoom level.
• Press the
° button and confirm the selected
setting.
The setting will take effect immediately.
OPT.
ZOOM
The following zoom positions are possible for the
reflector:24 - 28 - 35 - 50 - 70 - 85 - 105 mm(35 mm
format).
Tip:
If you do not necessarily need the full guide number
and maximum flash range of the flash unit, you can
leave the zoom reflector at the position for the shor-
test focal length of the zoom lens.
This will provide full light coverage of the picture
and eliminate the need to continually adjust it to
the focal length of the lens.
Example:
You use a zoom lens with a focal length range of
35 mm to 105 mm. In this case, you set the position
of the reflector of the flash unit to 35 mm.
