17
GB
3 Operating
3.1 Usage
The use of the Shiatsu acupressure massage seat cover will improve your wellbeing after a stressful day.
The massage effect is particularly useful for treating tense muscles and tired tissue. The unit provides
pleasant relaxation for overcoming everyday stress. The massaging can improve your well-being, and
is also useful in the sport and fitness areas.
3.2 Operation
Start-up
• Place the
massage seat cover
on a high chair or armchair and attach it to this by means of the
fasteners
on the back.
Ensure that the seat cover is supported over its entire area and has a
sufficiently high backrest.
•
Insert plug
into the mains socket. Ensure that the power supply is easily accessible.
•
Take a seat on the Shiatsu acupressure massage seat cover and familiarise yourself with the functions.
•
Sit comfortably and upright. Ensure you sit centered and such that the massage heads
can move
to the left and right of your spinal column.
Operating the unit
The MC 825 shiatsu seat cover has three functions for an effective massage: fingertip massage (Shiatsu
massage), acupressure massage and heat. The heat function can only be used together with the
Shiatsu massage in the back, during which the neck massage and the acupressure massage in the seat
base and in the waist area can also be activated. Do not use the unit for more than 15 minutes at a
time. After approx. 15 minutes, the unit will switch off automatically. Always allow the unit to cool
down fully before you use it again.
Buttons on the control unit
Use the buttons on control pad to operate the massage seat cover:
After you have plugged the plug into the mains socket, the LED of the On/Off button
flashes.
Switch on the device by pressing ON/OFF button
. The LED illuminates. The device starts with
standby mode. If no other button is pressed, the device turns off after 15 minutes automatically.
DEMO button
You may activate demo function with or without pressing ON/OFF button
before.
Press the DEMO
button
, the device starts automatically with introduction of different back setting with different
functions. The LEDs schow the current massage regions and functions. The device will stop once all
functions worked.
NECK MASSAGER button
Adjust the massage heads to the desired height by turning wheel
.
Switch on the device by pressing ON/OFF button
.
NECK MASSAGER button
is for the neck/shoulder reversible kneading massage. Press this button
once, left massage head
is kneading counterclockwise; right massage head
is kneading clockwise.
Press it a second time, neck massage stops.
BACK buttons
Switch on the device by pressing ON/OFF button
.
Select the region you wish to massage with the back massage button
(
/
/
).
Whole Back button
(full back)
The Shiatsu massage heads
move from the “Park” position at the base of the backrest, up to the
shoulder area, massaging the back in a circular motion whilst doing so. Once the uppermost position
has been reached, the direction of rotation of the massaging heads is reversed. The heads then travel
