470207
13
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
13
4. Place the 26mm eyepiece (12, Fig. 15) into the eyepiece holder on the
telescope and tighten the attachment thumbscrew (
13, Fig. 15) to a "firm feel" only.
Make sure that the flip-mirror control (
14, Fig. 15) is in the “up” position, as shown
in the above photo. See page 8, for more information. Remove the dust cover (
15,
Fig. 15
) from the end of the telescope tube.
5. Make sure that the computer control panel power switch (A, Fig. 2) is in the OFF
position. Remove the Autostar handbox and the coiled cord from the packing
materials. Plug one end of the cord into the HBX port (
C, Fig. 2)and the other end
of the coiled cord into the coiled cord port at the bottom of Autostar handbox, as
shown above.
6. Tighten (to a "firm feel" only, do not overtighten) the vertical lock (Fig. 6) and the hor-
izontal lock (
Fig. 9)
.
Attaching the Viewfinder
ETX-90AT: 8 x 21mm Viewfinder: Slide the eyepiece end of the viewfinder
through the front of the viewfinder bracket (16, Fig. 18).
ETX-105AT or ETX-125AT: 8 x 25mm Right-Angle Viewfinder: Slide the front
cell end of the right-angle viewfinder through the rear of the viewfinder bracket
(17, Fig. 19).
Unthread the six alignment screws slightly to fit the viewfinder through the
bracket. With the viewfinder in place, tighten the six alignment screws to a firm feel
only against the viewfinder tube.
Using The Viewfinder
As with most astronomical telescopes, the ETX model telescopes present a fairly
narrow field of view to the observer. As a result it is sometimes difficult to locate and
center objects in the telescope’s field of view. The viewfinder, by contrast, is a low-
power, wide-field sighting scope with crosshairs that let you easily center objects in
the eyepiece of the main telescope’s field of view. The telescope viewfinder is a great
help in locating faint astronomical objects before you begin observing through the
telescope eyepiece.
ETX-90AT 8 x 21mm Erect-Image Viewfinder:
Standard equipment with the ETX-90AT, the 8 x 21mm Erect-Image Viewfinder has
8-power magnification and an aperture of 21mm. This viewfinder presents a
correctly oriented image both up-and-down and left-to-right.
ETX-105AT or ETX-125AT 8 x 25mm Right-Angle Viewfinder:
Standard equipment with the ETX-105AT and ETX-125AT, the 8 x 25mm Right-Angle
Viewfinder has 8-power magnification and an aperture of 25mm. This viewfinder
presents a correctly oriented image up-and-down, but is reversed left-for-right.
Fig. 12: Attach telescope to
tripod.
Fig. 11: High latitude leg
mounting hole and
corresponding attachment
knob.
Fig. 10: Loosen control latch .
Fig. 15: Insert eyepiece.
Fig. 16: Tighten vertical
lock.
Fig. 17: Tighten horizontal
lock.
Fig. 13: Level tilt-plate.
Fig. 14: Handbox HBX port.
Fig. 18: ETX-90 Viewfinder Installation.
Fig. 19: ETX-105/-125 Viewfinder
µ
¹
¹
Ƹ
ƹ
ƺ
ƻ
Ƽ
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meade ETX-90AT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meade ETX-90AT in de taal/talen: Engels als bijlage per email.

De handleiding is 4,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info