6 [EN]
Set Up
---------------------------------------------------------------------------------------------------------------------------------------
The portable air conditioner needs to be vented to the outside in order to remove hot air, this is typically
done through a window. The duct provided is 1.8 metres long and cannot be extended.
There are two different window kits provided: the window kit plates and the flexible window kit – only
one window kit needs to be used depending on the type of window/door you wish to use. We
recommend using the window kit plates for all sliding windows and doors, and the flexible window kit
for all other types.
Steps 3 and 4 are only required when using the window kits plates. For instructions on how to set up
the flexible window kit, see separate leaflet inside the flexible window kit box.
The following steps are not required if you wish to use your portable air conditioner in Dry Mode.
Step 1: Connect the duct machine adaptor to the duct using a twisting motion. Do not force the
connection as this could cause damage.
Step 2: Connect the duct window adaptor to the other end of the duct using a twisting motion.
Do not force the connection as this could cause damage.
Step 3: Attach the duct to the window kit plates using the duct window adaptor.
