12 13MAXDATA PLATINUM 100 I M8Board Features
12 13MAXDATA PLATINUM 100 I M8Board Features
Hardware Requirements
To avoid integration difficulties and possible board damage, your system must meet the requirements
outlined below.
Processor
Supports Dual‑Core Intel
®
Xeon
®
processor 3000 series and Quad‑Core Intel
®
Xeon
®
processor 3200
series.
Memory
The Server Board provides four DIMM sockets across two banks. Bank 1 consists of DIMM sockets
A1 and B1. Bank 2 consists of DIMM sockets A2 and B2. Minimum memory operation is a single
512MB DIMM in socket A1. This will provide single‑channel interleave. For dual‑channel interleave,
two identical DIMMs are required in sockets A1 and B1.
To operate in dual‑channel dynamic paging mode, the following conditions must be met:
• Populate two identical DIMMs in sockets DIMM A1 and DIMM B1.
• Populate four identical DIMMs in each socket location.
/ Note
The use of three DIMMs is not supported. Use DIMMs that are the same type and speed. Use of
identical DIMMs is preferred.
DIMMs must meet the following requirements:
• Use only DIMMs with DDR2 DRAM technology.
• Use only DDR2‑667 and DDR2‑800 stacked DIMM modules.
