3 Click Adjust speed dial list and other fax settings.
4 Click the Dialing and Sending tab.
5 From the “Sending options” area, select After Dial from the “When to scan document” section.
6 Click OK.
7 Resend the fax.
Could not detect a proof sheet
The document placed on the scanner glass is not a valid proof sheet. For more information, see “Printing photos
stored on a memory device using the proof sheet” on page 127.
No proof sheet information
The photo proof sheet you printed and scanned is no longer valid.
You may have removed the memory card or flash drive from the printer, or turned off the printer, before scanning
the photo proof sheet.
For more information, see “Printing photos stored on a memory device using the proof sheet” on page 127.
No valid photo image files detected
No supported images have been found on the memory card or flash drive.
The printer supports Baseline JPEG files (including Exif) ending with the extensions JPEG, JPE, and JPG.
The following TIFF formats as read from a camera card or USB flash drive are supported:
• RGB uncompressed data: Baseline TIFF Rev. 6.0 RGB Full Color Images
• YCbCr uncompressed data: TIFF Rev. 6.0 Extensions YCbCr Images
Only TIFF files created directly from digital cameras and not modified by computer software are supported.
Paper Size/Type error
The paper loaded in the printer is not supported for duplex printing.
Load plain letter- or A4-size paper.
Paper or Photo Size error
One or more photos selected for printing have a size that does not match the size of the paper loaded in the printer.
Change the photo size to match the size of the paper loaded in the printer, or change the paper size to match the
photo size.
PictBridge Communication Error
Remove and then reinsert the USB cable that came with the camera into the PictBridge port on the front of the printer.
Troubleshooting
254
