When more than one transmitter is used
1. User shall remove all the batteries from the temperature station and transmitters and wait 60
seconds if setting has been done with one transmitter before.
2. Insert the batteries to the first transmitter.
3. Within 30 seconds of powering up the first transmitter, insert the batteries to the Temperature
Station. Once the batteries are in place, all segments of the LCD will light up briefly. Then the
indoor temperature and the time as 0:00 will be displayed. If they are not shown in LCD after 60
seconds, remove the batteries and wait for at least 60 seconds before reinserting them.
4. The outdoor temperature from the first transmitter (channel 1) should be displayed on the
Temperature station. Also, the signal reception icon will be displayed. If this does not happen after
40 seconds, the batteries will need to be removed from both units and reset from step 1.
5. Insert the batteries to the second transmitter within 10 seconds after the temperature station
successfully receives the signal of the first transmitter.
6. The outdoor temperature from the second transmitter and the "channel 2" icon should then be
displayed on the Temperature station. If this does not happen after 40 seconds, the batteries will
need to be removed from all the units and reset from step 1.
7. Insert the batteries to the third transmitter within 10 seconds after the temperature station
successfully receives the signal of the second transmitter.
