Disabling auto restart
NOTE
!
If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
ADVANCED FUNCTIONS
16
ENGLISH
* The feature can be changed according a
type of model.
* The feature can be changed according a
type of model.
- For cooling only models, the temperature
is set to 22°C (71.6°F).
Room temp. Set temp.
Operation
mode
Below 21°C 24°C
Heating
operation
Above 21°C
and below
24°C
23°C
Dehumidify-
ing operation
Above 24°C 22°C
Cooling
operation
Ionizer Purification operation
Ion particles from Ionizer developed by LG
sterilize the aerial bacteria and other harmful
substances.
1 Press | to turn on the power.
2 Press A.
-
K is displayed on the display screen.
NOTE
!
• You can use this function by pressing
A
without turning the air conditioner
on.
• This function may not be supported, de-
pending on the model.
• Do not touch Ionizer during operation.
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores
the previous settings. This function is a fac-
tory default setting.
1 Open the front cover.
- Lift up both sides of the cover slightly.
2 Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp will
blink 6 times.
