provided.
1. Turn the cap assembly
separate from cap tank.
the water bottle.
2. Assembly water bottle by the
Beyond 300 mm). Please
relocate the tilting basket.
not compatible.
3. Assembly the water bottle on the door.
ww
• Please use bottled water currently circulated.
- If you fill soft drinks, milk and fruit juices or
ground water(included Ca, Mg, Si etc..) or no
filtered water, it may cause malfunctioning.
• When you fill water tank with water, please let
hot water cool before putting water tank in
refrigerator.
- Hot water cause malfunctioning.
• When you install water tank in refrigerator,
cap should fit into (plug) housing and safety
knob has to be pointed to “close”.
- When water tank is not
correctly inserted,
dispenser might not work
or water tank might fall
off on the floor.
• If you want to take out water tank for re-
dispensing or cleaning, you should grab and
pull the upper part of the water tank and have
safety knob pointed to “open”.
Close
Close Open
Close
Open
1. Press the dispenser pad with a cup.
2. If pressing the pad, water inside of the
dispenser is supplied.
3. If slowly removing a cup from the pad, water
will not fall down.
4. Some noise after dispensing is the sound to
absorb water remained in the tube, which is for
the purpose of sanitation.
Drinking
ww
Do not use other beverage (milk, juice,
carbonated beverage etc) than potable water.
Especially beverage including grain must not be
used (may result in failure).
Fill with the potable water only.
ww
water is taken from the tank (e.g. Bottle, water tank).
