20433
18
Verklein
Vergroot
Pagina terug
1/143
Pagina verder
Chapter 3 Using the Operator Panel
3-2
The following indicators light up during normal operation and
when the printer needs attention.
The message display gives information in the form of short mes-
sages. The eight messages listed below are displayed during
normal warm-up and printing.
Other messages that may appear when the printer needs the op-
erator’s attention are explained on page 4-4.
The interface Indicator shows the interface that is currently used.
It uses the following abbreviations:
PAR
Standard bi-directional parallel interface
SER Serial interface (RS-232C)
NET Network interface
OPT
Option network interface card
--- No interface is active.
Each interface has a timeout time of 30 seconds during which
the other interface should wait to receive a print job. Even if a
print job has been completed on the interface, you should wait
for this period until the other interface begins printing the job.
1.1 Operation Indicators
Indicator Description
Flashing: Indicates when an error occurs
that you can clear by yourself.
Lit: Indicates that the printer is on-line.
The printer prints received data.
Off: Indicates that the printer is off-line.
Data can be received but will not be printed.
Also indicates when printing is automatical-
ly stopped due to occurrence of an error.
Flashing: Indicates data transfer is taking
place.
Lit: Indicates either that data is being proc-
essed, or that data is being written to the
memory card.
Flashing: Indicates when the printer needs
maintenance attention or the printer is
warming up (Please wait).
Lit:
Indicates when a problem or an error
occurs that you can clear by yourself. (For
example, paper jam occurs.)
1Flashing: Indicates when no paper is de-
tected.
Fast-Flashing:
Indicates that a paper
jam is occurring.
Lit:
Indicates that the MP tray is select-
ed.
2Flashing:
Indicates when the cassette or
paper is not detected, or when the paper
is loading.
Fast-Flashing:
Indicates that a paper
jam is occurring.
Lit:
Indicates that the cassette is select-
ed.
3Flashing:
Indicates that there is paper
jam in the optional finisher.
Lit: Indicates that the document finisher
is being selected.
READY
DATA
ATTENTION
1
2
3
1.2 Message Display
Message Meaning
Self test The printer is self-testing after power-up.
Please wait The printer is warming up and is not
ready. When the printer is switched on for
the first time after the toner container is
installed, (Adding toner) also appears.
Ready The printer is ready to print.
Processing The printer is receiving data, generating
graphics, reading a memory card/hard
disk, or printing.
Sleeping The printer is in Sleep mode. The printer
wakes from Sleep mode whenever a key
on the operator panel is pressed, the cov-
er is opened or closed, or data is re-
ceived. The printer then warms up and
goes online. The time that the printer
takes to enter Sleep mode depends on
the Sleep Timer setting.
Cancelling data
Jobs inside the printer are being can-
celed. To cancel a job, see the table on
page 3-3.
Waiting The printer is waiting for the end-of-job
command before printing the last page.
Pressing the GO key allows you to obtain
the last page immediately.
FormFeed TimeOut
The printer is printing the last page after
a waiting period.
1.3 Interface Indicator
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kyocera FS9500DN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kyocera FS9500DN in de taal/talen: Engels als bijlage per email.

De handleiding is 5,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info