690029
26
Verklein
Vergroot
Pagina terug
1/187
Pagina verder
21
ENGLISH
To perform the cleaning program, you will need a container with minimum capacity of 0.6
litres and a KRUPS (XS 3000) cleaning tablet.
If your machine is unplugged when cleaning or if there is a power cut, the cleaning
programme will re-start at the step in progress when the incident occurred. You will
not be able to postpone this operation. This is essential due to water system rinsing
reasons. In this case, a new cleaning tablet may be required. Be sure to complete
the entire cleaning cycle to avoid any risk of irritation (seek medical advice if cleaning
solutions are accidently swallowed). The cleaning cycle is a continuous cycle and the
pump can be heard intermittently. Do not put your hands under the coffee outlets
during the cycle.
Press the key to start the automatic cleaning program when the “Cleaning needed”
message is displayed. Just follow the instructions shown on the screen.
The automatic cleaning program is in 2 parts – the cleaning cycle itself, then 1 rinsing cycle.
This program lasts about 13 minutes. Press to perform cleaning at any time and then
choose MAINTENANCE => OK => CLEANING from the menus displayed.
Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage
that may result from the use of tablets from other brands.
You can obtain cleaning tablets from KRUPS Service Centres.
Automatic scale removal program – total duration: about 20 minutes
If your product is equipped with our Claris - Aqua Filter System cartridge F088 - Please
remove this cartridge during the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The appliance
will automatically warn you with a message when you need to proceed with scale removal.
To perform the cleaning program, you will need a container with minimum capacity of 0.6
litres and a KRUPS F 054 (40 g) cleaning sachet.
Press the key to start the automatic cleaning program when the “Scale removal
needed” message is displayed. Just follow the instructions shown on the screen, making
sure the sachet dissolves fully.
The scale removal program is in three parts – the scale removal cycle itself, then 2 rinsing
cycles.
Only use KRUPS scale removal products. You can obtain scale removal products from
KRUPS Service Centres. The manufacturer may not be held responsible for damage to the
appliance through use of other products.
If a power cut occurs during the cycle or if you unplug your machine, the cycle will
re-start at the step in progress when the incident occurred, without the option of
postponing this operation.
Be sure to complete the entire scale removal cycle to avoid any risk of intoxication. The
scale removal cycle is a continuous cycle and the pump can be heard intermittently. Do not
put your hands under the coffee outlets during the cycle.
Make certain to protect your work surface during scale removal cycles, especially if
they are made of marble, stone or wood.
General maintenance
Always remove the power supply cord from the socket and let your appliance cool down
26

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Krups-EA82-serie

Zoeken resetten

  • Zojuist een stekkersymbool in display. Stekker uit stopcontact getrokken en er weer in gestoken, nu doet het apparaat niets meer. Iemand ervaring mee en dan wat te doen? Alvast bedankt! Gesteld op 20-3-2022 om 20:48

    Reageer op deze vraag Misbruik melden
  • Ik krijg steeds de melding "machine vullen?....druk op OK.
    Deze melding blijft zich herhalen. Niets werkt. Uitzetten niet en ook de stekker er een tijd uit werkt niet. Ik kan gewoon geen koffie meer zetten. Wat is het probleem? En hoe kan ik dit oplossen? Gesteld op 12-12-2021 om 22:11

    Reageer op deze vraag Misbruik melden
  • Mijn Krups AE82 geeft de mededeling "machine vullen?"...druk op OK.
    Het probleem is dat de machine dit blijft herhalen. Niets werkt. Uitzetten niet, de stekker er een tijdje uit werkt ook niet. Andere knoppen reageren niet. Ik kan gewoon geen koffie meer zetten.
    Kent iemand dit probleem? En ook belangrijk, kent iemand een oplossing voor dit probleem? Gesteld op 12-12-2021 om 22:05

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Krups EA82 serie bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Krups EA82 serie in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 1,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info