THE SALT RESERVOIR
Water softening can only take place when there is salt in the
reservoir. The salt reservoir must be filled prior to using the
DishDrawer® and whenever the salt reservoir indicator light is red.
HOW TO FILL THE SALT RESERVOIR
1. Open the DishDrawer®.
2. Unscrew the salt reservoir plug by turning anti-clockwise.
3. Place the salt into the salt container and pour the contents into the
salt reservoir. The salt reservoir can hold up to approximately
0.5kg of salt.
4. Fit the cap tightly back into its original position.
5. If you do not wash your dishes immediately after filling the salt
reservoir, run a rinse programme to remove any salt water or spilt
granules.
SALT INDICATOR LIGHT
If the salt indicator light is red, the salt reservoir is empty. If the salt
indicator light is black, there is enough salt in the reservoir for the
wash programme that has been selected.
NOTE
When filling the salt dispenser, you may notice water being displaced
from the water softener overflow.
WARNING - IMPORTANT!
Do not pour detergent or rinse aid into the salt reservoir.
Detergent and rinse aid will destroy the water softener.
Salt only
Detergent
Rinse Aid
13