We highly recommend the regular use of liquid rinse aid to give the
best drying results. Rinse aid gives a streak free, sparkling clean look
to glass and chinaware, in addition it prevents metal from tarnishing.
The rinse aid dispenser is on the inside of the drawer, located
underneath the detergent dispenser. The dispenser holds
approximately 50ml of rinse aid.
HOW MUCH RINSE AID TO USE
The regulator may need adjusting to suit your water conditions. The
lowest setting is ‘1’ and the highest is ‘5’. Refer to Option Adjustment
Mode section (P16) to adjust the rinse aid setting. If there is excessive
foam at the end of the wash, reduce the setting. If dishes are wet or
streaky after drying, increase the setting.
RINSE AID INDICATOR LIGHT
If the rinse aid indicator light is red, refill the dispenser. If the rinse aid
indicator light is dimly lit or not lit at all, there is enough rinse aid for
the wash.
FILLING THE RINSE AID DISPENSER
1. Turn the plug anti-clockwise and remove.
2. Pour the rinse aid into the circular opening.
3. Take care not to spill rinse aid into the DishDrawer®.
WARNING
Any spillages must be wiped up to prevent excess foaming.
4. Fit the plug back into the original position.
Rinse aid dispenser
11
