Setting rinse aid dosage (not necessary when using tablets/capsules)
The rinse aid dosage can be adjusted to the detergent used.
The lower the setting, the less rinse aid is dispensed (factory
setting: position 4).
Press the button to open the cover. Using a coin or similar
object, turn the arrow to the desired setting.
After adjusting the rinse aid setting, shut the cover again.
If there are streaks: reduce the dosage by turning the dial to a
lower setting (1-3). If crockery is not perfectly dry: increase
the dosage by turning the dial to a higher setting (5-6).
Plastic dishes have more difficulty drying and a higher rinse
aid setting will not improve the situation. Detergents with rinse aid incorporated may be effective only with
longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use
powder detergent). Detergents with rinse aid incorporated tend to form excess suds.
9
5. Rinse aid operation*
INSERT RINSE AID
|>||= DONE
IN THE DISPENSER
|>||= DONE
RINSE AID
OPERATION
Press right button to open the cover of rinse aid dispenser.
Fill the rinse aid dispenser to MAX line (~150 ml).
Take care not to spill any rinse aid when filling the
dispenser!
Close the cover properly after filling and immediately wipe
away any rinse aid spilt accidentally. This prevents the
formation of excess foam that might decrease washing
results.
Confirm operation by pressing button.
*If multifunctional detergent was chosen in the previous
step, this step will be skipped by the appliance.
