683161
51
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
2 Key in a frequency value using the numeric keypad.
“-” changes into a numeric value when a numeric key is pressed
and a value can be input starting from the highest-order digit.
To enter 1.82 MHz, press [0/50], [1/1.8], [8/24] followed by
[2/3.5], and press [ENT] when input is complete.
To enter a frequency lower than 6 MHz for K type
transceivers, start by keying in a “0”.
To enter a frequency lower than 8 MHz for E type
transceivers, start by keying in a “0”.
Pressing [CLR] halfway through the input process clears the
input and restores the VFO frequency display before the input.
.
During fine tuning, a frequency up to 59.99999 MHz can be input
(input of 60 MHz is not allowed).
Pressing [ENT] halfway through the input process fills the
remaining digits with “0” and completes the input.
When a frequency value out of the TX and RX range is input, an
alarm tone is output and the input value is automatically cleared.
If the first input value is between 0 and 5, input starts from the
10 MHz digit. If the first input value is between 6 and 9, input
starts from the 1 MHz digit.
“0” that is entered up to the 10 Hz digit will not appear as “0” in the display.
Inputting a frequency value automatically switches RIT and XIT
to OFF but does not clear the offset frequency.
When fine tuning is OFF, the smallest digit for input is the 10 Hz digit
in modes other than AM and FM, and 100 Hz in the AM and FM mode.
When in the auto mode, the mode switches automatically after
input of frequency is complete.
Frequency Input History
The latest 10 frequency values that were input using the numeric
keypad are stored in the transceiver. To use the same frequency
value, it is possible to retrieve it from the history.
1 Press [ENT] to enable input of a frequency value.
“-” is displayed for all digits of the frequency value.
2 Turn the [MULTI/CH] control to display the history.
Frequency values that were previously entered and the
record number (E0 to E9) are displayed. The first frequency
value shown is the most recent input.
Turning the control to the right jumps to the subsequent
record numbers in ascending order. The larger the record
number, the older the record.
.
3 Press [ENT] to configure the selected frequency to
VFO.
When 10 frequency values have been registered, the
oldest input in the history will be deleted when another
frequency value is registered.
Frequency Lock
The frequency lock function disables operation of specific keys or
control knobs to prevent the frequency from being altered
accidentally due to erroneous operation of the key or control
knobs.
Press [LOCK] to lock the frequency value.
The [LOCK] LED lights up in orange. Pressing [LOCK] again
while in the locked state cancels the locked state.
The following operations are disabled when frequency lock is
turned on.
Frequency tuning
Change of memory channel
Change of quick memory channel
Direct input of frequency value
Registration of memory channel
Starting program scan or VFO scan
Starting memory scan or quick memory scan
Switching between the VFO and memory channel modes
Frequency band selection
Memory shift
Configuring the frequencies for VFO A and VFO B to the
same value
Switching between VFO A and VFO B
Mode selection
Switching to FINE tuning
CW auto tune
Quick memory channel mode switch
Registration of quick memory channel
Touchscreen tuning
When “Tuning Control Lock” is selected in Menu [3-10],
only the Tuning control will be locked.
Selecting the Frequency Lock Function Behavior
It is possible to lock only the Tuning control in the frequency lock
function.
Configure in Menu [3-10]
Lock Function
Setting Value Frequency Lock (default)/ Tuning Control Lock
Frequency Lock: Locks both
Tuning control and [MULTI/CH] control.
Tuning Control Lock: Locks only the Tuning control.
BASIC OPERATIONS 4
4-7
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info