683161
46
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Dimmer
Below are steps to adjust the brightness of the screen and LEDs.
Switching the Brightness Level
The preset brightness of the screen and LEDs can be adjusted
according to the surrounding conditions.
1 Press [MENU].
2 Press F [DIMMER].
If F [DIMMER] is not displayed, press F [MORE] to display
F [DIMMER].
Pressing F [DIMMER] each time switches the dimmer setting
in the following sequence: “DIMMER 1” → “DIMMER 2” →
“DIMMER 3” → “DIMMER 4”.
3 Press [MENU] or [ESC] to end the process.
Adjusting the Dimmer Level
Each of the preset values for “Dimmer 1”, “Dimmer 2”, “Dimmer 3”
and “Dimmer 4” can be configured to a different value for “Display”
(screen) and “LED” respectively.
1 Press [MENU].
2 Press F [DIMMER].
If F [DIMMER] is not displayed, press F [MORE] to display
F [DIMMER].
3 Press and hold F [DIMMER].
The Dimmer configuration screen appears.
.
4 Press F2 [DIMMER] to select a dimmer preset.
5
Press F3 [ ]/ F4 [ ] to select “Display” or
“LED”.
6 Press F5 [–]/ F6 [+] or turn [MULTI/CH] to change the
setting value.
The setting values and default values are shown below.
Dimmer
Display Setting Value Default
1
Display 5 to 100 (5-step) 100
LED 5 to 100 (5-step) 100
2
Display 5 to 100 (5-step) 75
LED 5 to 100 (5-step) 75
3
Display 5 to 100 (5-step) 50
LED 5 to 100 (5-step) 50
4
Display 0 to 100 (5-step) 25
LED 5 to 100 (5-step) 25
Configuring “Display” for “Dimmer 4” to “0” and exiting
the menu turns off the lights on the screen completely.
Pressing [MENU] at this time temporarily switches the
screen brightness to the condition when the setting value
of “Display” is “5” and allows the information displayed
to be checked.
7 Press [MENU] or [ESC] to end the process.
Adjusting AF Gain
Below are the steps to adjust the volume so that sound can be
heard from the speaker.
Turn the [AF] control.
Turning the control to the right raises the volume, while turning
to the left lowers it.
If no sound is heard or if only a light noise-like sound is heard
even when the [AF] control is turned all the way to the right,
the squelch may be closed. Adjust the squelch level in this
case.
The volume of the beep sound, sidetone and
announcement cannot be adjusted using the [AF]
control.
Adjusting RF Gain
Below are the steps to adjust the gain of the RF amplifier. Under
normal circumstances, turn the [RF] control all the way to the right.
To enhance clarity when there is external noise or interference by
other stations, turn the control slightly to the left to lower the gain
level.
Turn the [RF] control.
Start by checking the peak scale of the S meter, followed by
turning the [RF] control in the anti-clockwise direction
without lowering the peak value of the S meter. Doing so
attenuates signals weaker than this level and eases
reception from the desired station.
Depending on the type of antenna, gain level and band
condition, better effect may sometimes be achieved by
turning the [RF] control slightly to the left rather than all the
way to the right.
In the FM mode, turning the [RF] control does not change
the gain level. Under normal circumstances, turn the
[RF] control all the way to the right.
Adjusting the Squelch Level
Below are steps to adjust the threshold level for squelch, a function
for eliminating noise that is heard when receiving a frequency with
no signal.
Turn the [SQL] control.
Configure the squelch level to the position where noise
disappears. When squelch opens upon receiving a signal, the
[BUSY/TX] LED lights up in green.
The position of the [SQL] control at which noise
disappears varies according to the strength of the noise
and surrounding conditions such as temperature.
The position of the control knob at which noise
disappears also varies depending on whether this
transceiver is in the FM mode or in other modes.
4 BASIC OPERATIONS
4-2
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info