15
DCR600 Front Panel Information Display
ABitstream Indicators: When the input is
a digital source, these indicators display the
specific type of data signal.
BOptical Source: Indicates an Optical
Digital Input has been selected.
CDTS: Indicates a DTS-encoded source.
DDolby Digital: Indicates a Dolby Digital
source.
ECoaxial Source: Indicates a Coaxial
Digital Input.
FDolby Pro Logic: Indicates the Dolby
Pro Logic mode has been selected.
GAnalog Input: Indicates an analog input
source.
NOTE: Analog audio input is not available
when the DVD input is in use.
HDolby 3 Stereo Indicator: This indicator
lights when the Dolby 3 Stereo Mode has been
selected.
IVMAx Mode: Lights when the VMAx
mode is in use.
VMAx F
appears when the
Far Field VMAx mode is selected; VMAx N
appears when the Near Field VMAx mode is
selected.
J5-Channel Stereo: Lights when the 5-
Channel Stereo mode has been selected.
KLogic 7 Mode: Indicates that the Logic 7
mode is in use. LOGIC 7C appears for the
Cinema version of Logic 7; LOGIC 7M
appears for the Music version of Logic 7.
LHall Mode: Lights when the Hall mode
has been selected.
MTheater Mode: Indicates that the Theater
mode has been selected.
NNight Mode: Indicates that the DCR600
is in the Night mode, which preserves the
dynamic range of digital program material
at low volume levels.
OSpeaker/Channel Input: These indicators
are multipurpose, indicating either the speaker
type selected for each channel or the incoming
data-signal configuration. The left, center,
right, right surround and left surround speaker
indicators are composed of three boxes, while
the subwoofer is a single box. The center box
lights when a “Small” speaker is selected, and
all three boxes light when “Large” speakers
are selected. When none of the boxes are lit
for the center, surround or subwoofer channels,
no speaker has been selected for one of those
positions. The letters inside each of the center
boxes display active input channels. For stan-
dard analog inputs, only the L and R will light,
indicating a stereo input. When a digital
source is playing, the indicators will light to
display the channels being received at the digi-
tal input. When the letters flash, the digital
input has been interrupted.
PPreset Number/Sleep Timer: In Tuner
mode these numbers indicate the preset mem-
ory location in use. In Sleep function mode it
shows the number of minutes remaining before
the unit goes into the Standby mode.
QPreset Indicator: This indicator lights
when the tuner is in use to show that the
Preset Number/Sleep Timer Pis showing
the station’s preset memory number.
RSleep Indicator: This indicator lights
when the Sleep function is in use.
S
Memory: Flashes when entering presets
and other information into the tuner’s memory.
TStereo: Lights when an FM station is
being tuned in stereo.
UTuned: Lights when a station is being
received with sufficient signal strength to pro-
vide acceptable listening quality.
VAuto: Lights when the tuner is in Auto
mode.
WMain Information Display: Shows mes-
sages relating to the status, input source, sur-
round mode, tuner, volume level or other
aspects of operation.
XMute: Lights to indicate that the unit has
been put in Mute by pressing the Mute
Button c. Press the Mute button again to
return to the previously selected output level.
