19
Setting up the Time, Date and Language
1. In Clock and Alarm Mode, press and hold SET to enter clock and calendar setup.
2. The day of week should start ashing in the display.
Set Language:
Press UP or DOWN to select language for day of week: English, German, French,
Italian, Spanish or Dutch
Press SET to conrm your selection.
3. Select City Code:
Press UP or DOWN to select city code for your local area. Refer to P.XX for a list of
available codes.
Press SET to conrm your selection.
4. (if USR was chosen for city code) Set Minute for Latitude:
You will be asked to enter your latitude in minutes (º).
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press SET to conrm your selection. Repeat above procedure to set seconds for
latitude, minutes for longitude and seconds for longitude.
5. (if USR was chosen for city code) Set Time Zone:
Press UP or DOWN to adjust value in resolution of 30 min. Press and hold either button
for fast advance.
Press SET to conrm your selection.
6. (if USR was chosen for city code or city is in a DST zone)
Set Daylight Saving Time Option:
Press UP or DOWN to turn DST option on or off. Press and hold either button for fast advance.
Press SET to conrm your selection.
7. Repeat the above instructions to set year, month, day, calendar display format
(day/month or month/day), time display format (12 hr/ 24 hr), local hour and local minutes.
8. Upon completion the display will return to normal Clock and Alarm Mode.
Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm
Mode. All settings made will be discarded.
Rotating between Different Clock/Calendar Displays
In Clock and Alarm Mode, each press of SET rotates clock display between:
-Hour: Minute: Weekday
-Hour: Minute for UTC (Coordinated Universal Time)
-Hour: Minute: City
-Hour: Minute: Second
-Month: Day: Year (or Day: Month Year depending on settings)
Activating/Deactivating the Time Alarms
1. In Clock and Alarm Mode, each press of ALARM rotates clock display between:
-Weekday Alarm Time (displays OFF if weekday alarm deactivated)
- Single Alarm Time (displays OFF if single alarm deactivated)
- Pre-Alarm Time (if any of above alarm is activated, this function is ON)
2. When the above alarms are displayed, pressing UP or DOWN will activate/deactivate
the corresponding alarm.
Note: Press SET anytime during alarm selection mode to return to normal clock display.
