790075
26
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
BUILDING-IN THE HOB
Check that the kitchen unit and the opening conform to the requirements in respect of measurements and ventilation.
Remove any wood shavings after the cutting work in the worktop opening and treat the cut edges of plastic or wooden
worktops with sealing varnish if necessary to prevent the worktop from swelling due to moisture.
Lay the hob upside down on the worktop.
Mount the plug to the connecting cable in accordance with the imposed requirements.
Mount the supplied fastening brackets using the supplied screws in the induction hob.
Turn the hob over and lay it in the opening.
Adjust the bracket position to suit for different table top thickness.
Warning: Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation
(see picture).
Connect the hob to the mains supply. The hob is now ready for use.
Check the operation. If the induction hob is connected incorrectly, it will give a sound signal or show an error code
onthedisplays.
REMOVING THE HOB
Disconnect the appliance from the power supply. Remove the induction hob by applying pressure from below. Attention!
Take care not to damage the appliance! Do not try to remove the induction hob by trying to lift it out of the worktop
fromabove.
hob work top
fastening bracket
fastening bracket
26 English
26

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Inventum-IKI9035

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Inventum IKI9035 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Inventum IKI9035 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 8.26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info