670162
15
Verklein
Vergroot
Pagina terug
1/180
Pagina verder
#9 PASSBAND TUNING CONTROLS [TWIN-PBT]
(p. 75)
Adjusts the receiver’s IF filter passband width via
the DSP.
Passband width and shift frequency are displayed in
the multi-function display.
Push and hold [PBT-CLR] for 1 sec. to clear the PBT
sett
ings.
Adjustment range is set to half of the IF filter passband
width. 25 Hz steps and 100 Hz steps are available.
What is the PBT control?
The PBT function electronically modifies the IF pass-
band width to reject interference. This transceiver uses
the DSP circuit for the PBT function.
PBT2
PBT1
+
Low cutHigh cut Center
$0 PBT CLEAR SWITCH [PBT-CLR] (p. 75)
Push and hold for 1 sec. to clear the PBT settings.
The indicator on this switch lights green when PBT is in
use.
$1 NOTCH SWITCH [NOTCH] (p. 83)
Switches the notch function between auto, man-
ual and OFF in SSB and AM modes.
Either auto or manual notch function can be deacti-
vated in others set mode. (p. 132)
Turns the manual notch function ON and OFF
when pushed in CW, RTTY and PSK mode.
Turns the auto notch function ON and OFF
when pushed in FM mode.
• “ appears when manual notch is in use.
• “
appears when auto notch is in use.
No indicator appears when the notch function is not
in use.
Push and hold for 1 sec. to switch the manual
notch characteristics from wide, middle and nar-
row when manual notch function is activated.
The indicator on this switch lights green when the
function is activated.
What is the notch function?
The notch function is a narrow filter that eliminates un-
wanted CW or AM carrier tones while preserving the de-
s
ired voice signal. The DSP circuit automatically adjusts
the notch frequency to effectively eliminate unwanted
tones.
$2 TX SWITCH [TX] (p. 87)
Push to turn the TX function ON and OFF.
Use [RIT/TX] control to vary the TX frequency.
Push and hold for 1 sec. to add the TX shift
frequency to the operating frequency.
What is the TX function?
TX shifts the transmit frequency without shifting the re-
ceive frequency. This is useful for simple split frequency
operation in CW, etc.
$3 CLEAR SWITCH [CLEAR] (pgs. 73, 87)
Push or push and hold for 1 sec.* to clear the RIT/
TX shift frequency.
* Depending on the quick RIT/TX clear function setting
(p. 132).
$4 TRANSMIT FREQUENCY CHECK SWITCH
[XFC]
Monitors the transmit frequency (including TX
frequency offset)
when pushed and held during
split frequency operation. (p. 88)
While pushing and holding this switch, the transmit
frequency can be changed with the main dial, key-
pad, memo pad or []/[] s
witches.
When the split lock function is turned ON, pushing
[XFC] cancels the dial lock function. (pgs. 88, 129)
Monitors the operating frequency directly
when pushed and held when the RIT function
is turned ON. (RIT is temporarily cancelled.)
(p. 73)
$5
MAIN/SUB•M.SCOPE SWITCH
[MAIN/SUB M.SCOPE]
Push to select access to the main or sub read-
out. (p. 26)
The selected readout frequency is displayed clearly.
The sub readout functions only during split operation
or dualwatch.
Push and hold for 1 sec. to turn the mini spec-
trum scope screen indication ON and OFF.
(p. 67)
The mini spectrum scope screen can be indicated
with another screen, such as memory, set mode
screen, simultaneously.
8
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
15

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Icom-IC-7600

Zoeken resetten

  • Beste medeforumleden,

    Kan iemand mij vertellen hoe ik een split frequentie in een geheugenkanaal kan vastleggen? Bijv. 14.105 rx en 14.080 tx. Dit is een voorbeeld van 2 frequenties, niet echt wat ik wil dus.

    Bvbd.
    73’s PA0LDE Gesteld op 28-3-2020 om 21:59

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icom IC-7600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icom IC-7600 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info