To prevent damage caused by liquid, do not:
l Expose the device to pr
essurized or high-speed water. For example, carrying the device with you
when taking a shower, swimming, sailing, or surng.
l Use the device in environments with high temperature or humidity. For example, using the device in
saunas, spas, and bathrooms.
l Expose the device to liquids other than pure water. For example, salt water, beverages containing
alcohol or sugar, cosmetic lotions, or detergents.
l Intentionally soak the device in water or place it in other environments that may cause damage.
l Connect the device to accessories or charge it when it is wet.
l Allow the device to be impacted against, or disassembled by anyone other than authorized repair
technicians.
l Use the device when the card tray is not properly inserted.
If the device has already soaked in liquid, do as follows:
l Avoid drying the device using external heat sources (such as, hairdryers and microwave ovens).
Avoid placing objects such as cotton swabs and tissues into the charging port or speaker holes.
l Thoroughly wipe the device dry, then place it in a dry and ventilated environment. Place the device
in front of the fan. Let the fan blow cold air against the charging port and speaker holes. This may
dry the device faster.
l If the device has been dropped in water or the microphone, receiver, or speaker are wet, the sound
may not be clear during a call. To rectify this issue, refer to the aforementioned operations.
l If the device gets exposed to liquid, do not connect the device to any accessories, and use a piece of
clean, soft cloth (such as, camera lens cloth) to wipe the device dry. Do not charge the device
immediately. Make sure the device is dried enough before charging it or connecting it to any
accessories. If in doubt, take your device to the nearest authorized Huawei authorized service
center.
l The device has oleo-phobic (oil resistant) layer on it. The oleo-phobic layer will wear out over time.
Cleaning and corrosive products will decrease the oil resistance of this layer, and may damage the
device.
l Despite the foregoing, the device may still be damaged in particular situations.
Laser safety information
l Laser class: CLASS 1. Compliance with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice. 50, dated June 24, 2007
l Wavelength: 940 nm
l Laser standard (International): IEC/EN 60825-1:2014
l Laser standard (US): FDA 21 CFR Part 1040.10
Legal Notice
112
