28
ROUTINE MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our upright bike so lubrication is not needed. The
most important maintenance step is to simply wipe your perspiration off the trainer after
each use.
HOW DO I CLEAN MY HORIZON FITNESS UPRIGHT BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness
of your Horizon Fitness upright bike and its operating environment will keep mainte-
nance problems and service calls to a minimum. For this reason. Horizon Fitness recom-
mends that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the upright bike with the on/off switch, and unplug the power cord from the
wall outlet.
WARNING!
To remove power from the upright bike, the power cord must be disconnected from the
wall outlet.
•Wipe down the upright bike with a damp cloth. Never use solvents, as they can
cause damage to the upright bike.
• Inspect the power cord. If the power cord is damaged contact Horizon Fitness.
•Make sure the power cord is not underneath the upright bike or in any other area
where it can become pinched or cut.
EVERY WEEK
Clean underneath the upright bike, following these steps:
•Turn off the upright bike with the on/off switch.
• Then unplug the power cord at the wall outlet.
•Move the upright bike to a remote location.
•Wipe or vacuum any dust particles or other objects that may have accumulated
undermeath the upright bike.
• Return the upright bike to its previous position.
