635076
60
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
Color LCD Monitor
Model Name
32LD8800TA
37LD8800TA
USER MANUAL
This is the image of the model 32LD8800TA.
Desktop stand is optional for 37LD8800TA.
READ THE INSTRUCTIONS INSIDE CAREFULLY.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE
For future reference, record the serial number of your monitor.
SERIAL NO.
This serial number is located on the rear of the monitor.
32LD8800TA 37LD8800T
A
HITACHI
ENGLISH
USER MANUAL
Thank you for purchasing the HITACHI LCD Monitor.
Please read this user manual carefully before operating
this product.
To ensure proper operation, please read and follow ALL
the instructions, especially the "IMPORTANT SAFETY
INSTRUCTIONS" and "SAFETY PRECAUTIONS".
Please keep this user manual for future reference.
32LD8800TA 37LD8800T
A
HITACHI
1
IMPORTANT SAFETY INSTRUCTIONS .........1
INTRODUCTION ...........................................2
About This Manual ................................................ 2
Trademark Credits ................................................. 2
About Software ...................................................... 2
SAFETY PRECAUTIONS ...............................3
About the Symbols ................................................ 3
Cleaning and Maintenance .................................... 6
ABOUT LCD PANEL ...................................... 7
Common phenomena of
LCD Panel ............................................................. 7
FEATURES .................................................... 8
SUPPLIED ACCESSORIES ............................ 8
OPTION ........................................................8
COMPONENT NAMES ................................... 9
Main Unit ............................................................... 9
Remote Control ................................................... 10
PREPARATION ............................................ 11
Remote Control Batteries Installation .................. 11
Caution When Moving the Main Unit ................... 11
Safety Precaution on Main Unit Installation ......... 12
Anti-Tumble Measures ........................................ 12
CONNECTION ............................................ 13
Terminal Positions ............................................... 13
Connecting Procedure ......................................... 13
BASIC OPERATION .....................................18
Power On/Off ....................................................... 18
First Time Setup .................................................. 19
Volume UP/DOWN .............................................. 19
Mute .................................................................... 19
Input Switching to TV/AV1~5,
HDMI, and RGB .................................................. 20
Input Signal Screen Display ................................ 20
CONTENTS
MENU OPERATION .....................................21
How to use the On-Screen Display
(OSD) system ...................................................... 21
Language Menu .................................................. 21
Setup Menu (TV mode) ....................................... 22
Setup Menu (AV mode) ....................................... 24
Setup Menu (RGB mode) .................................... 25
Function Menu ..................................................... 27
Picture Menu (TV/AV mode) ................................ 29
Picture Menu (RGB mode) .................................. 32
Audio Menu ......................................................... 34
Timer Menu ......................................................... 35
FUNCTION .................................................. 36
Power Swivel ....................................................... 36
About Teletext ...................................................... 37
Size Switching ..................................................... 38
Multi Picture Mode ............................................... 40
Picture Freezing .................................................. 44
Photo Input Function ........................................... 45
Audio Switching ................................................... 51
Power Save Mode ............................................... 52
DVD Player / STB Selection ................................ 53
TROUBLESHOOTING ..................................54
When Following Messages Appear
on the Screen ...................................................... 54
Symptom and Check List .................................... 54
PRODUCT SPECIFICATIONS ...................... 57
Signal Input ......................................................... 58
Recommended Signal List .................................. 59
IMPORTANT SAFETY INSTRUCTIONS
Read this instruction thoroughly.
Retain this instruction for future reference.
Heed all warnings and cautions to prevent possible danger.
Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may
shorten its service time.
Do not block any ventilation openings.
Install the product in accordance with the manufacture’s instructions.
Before calling for the technical support or service technician, read “TROUBLESHOOTING” (
54
~
56
) to determine
the symptoms when problems occur during installation or operation of the product.
If serious problems happen (such as smoke or an abnormal odor from the unit), turn off the Main Power, unplug the
Power Cord, and then, contact your local dealer immediately.
32LD8800TA 37LD8800T
A
HITACHI
2
ENGLISH
INTRODUCTION
Thank you for purchasing the HITACHI LCD Monitor. We hope that you will enjoy the great performance with this
product.
This LCD monitor has been designed to meet the International standards. However, it could cause personal injuries
and property damage if improperly handled. In order to prevent potential danger and obtain maximum benefi t from
your set, please observe the following instructions when installing, operating, and cleaning the product.
Keep this manual for future reference, and record the serial number of your set in the space provided on the front
cover page of this manual.
About This Manual
The information in this manual is subject to change without notice.
This manual has been created with extra care. In case that you have any comments or questions regarding this
manual, please contact your local dealer or our Customer Service Center.
Before operating this set, please fully understand the prerequisite such as specifi cations or constraints of the
hardware and software. We are not responsible and have no liability for any loss, damage or injury as a result of
misuse.
Reproduction, copying, use, modifi cation, and/or transmission in whole or in part of this manual are prohibited
without any prior written permission.
All other products and company names used in this manual are trademarks or registered trademarks of their
respective owners.
Trademark Credits
VGA and XGA are trademarks of International Business Machines Corporation.
APPLE and Macintosh are registered trademarks of Apple Computer Inc.
VESA is a registered trademark of the Video Electronics Standard Association.
Licensed by BBE Sound, Inc. under USP5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Manufactured under license from BBE Sound, Inc.
WOW, SRS and (
) symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
SD Logo is a trademark.
HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
About Software
You may not alter, decompile, disassemble, decrypt, or otherwise reverse- engineer the Software installed in this
product, which are prohibited by law.
32LD8800TA 37LD8800T
A
HITACHI
3
SAFETY PRECAUTIONS
For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries
and/or damage to your property or this product.
About the Symbols
The following are the symbols used in this manual and affi xed on the unit itself. Please fully understand the meanings of the symbols before
reading the instructions in this section.
WARNING
Never ignore the instruction. There are risks of serious injuries or possible death to the user.
CAUTION
Do not ignore the instruction. There are possibilities of personal injuries and/or property damage.
Other Symbols
The triangle with illustration is intended to alert the users that there are possibilities of fi re, burst, or high temperature
if the product is handled improperly.
Each illustration within the triangle specifi es the contents in detail. (The fi gure on the left is an example.)
The circle with diagonal line and illustration is intended to prohibit the users from doing the indicated actions when
handle the product.
Each illustration within this symbol specifi es the contents in detail. (The fi gure on the left is an example.)
The blacked out circle with illustration is intended to constrain the users to follow the indicated actions when handle
the product. Each illustration within this symbol specifi es the contents in detail. (The fi gure on the left is an example.)
WARNING
There is a risk of re, electric shock, or serious injury.
Unplug the power cord immediately when serious problems happen.
Serious problems such as
Smoke, abnormal odor or sound comes out from the product.
No picture, no sound or distorted picture on the display.
Foreign objects (such as water, metals etc) get inside the unit.
Do not continue using the product under these abnormal conditions.
Turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.
For your safety, never try to repair the product by yourself.
Do not insert liquids or any foreign objects (such as metals or fl ammable items) inside the unit.
In case it happens, turn off the main power, unplug the Power Cord, and contact your dealer immediately.
Use special caution when younger children are around the unit.
Do not remove cover, or modify the product.
High-voltage components are installed inside of the unit. Removing covers can expose you to high
voltage, electrical shock, and other dangerous conditions.
Contact your local dealer to perform servicing such as inspection, adjustment, or repair work.
Disconnect the
plug from the
power outlet.
Do not
disassemble
32LD8800TA 37LD8800T
A
HITACHI
4
ENGLISH
SAFETY PRECAUTIONS (continued)
WARNING
There is a risk of re, electric shock, or serious injury.
Do not place any objects on top of the unit.
Objects such as
Liquid containers (vase, fi sh tank, fl owerpot, cosmetics or liquid medicine).
If water or any liquid spill onto the unit, it may cause short-circuit and result in fi re or electrical shock.
In case that it happens, turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.
Do not place anything heavy on top of the unit.
Do not climb on or hang from the unit.
Do not let your pets get on top of the unit
Do not expose this unit to rain or moisture.
Never use this unit in the bathroom or shower room.
Beware when you use this product outside, especially in rainy, or snowy weather, and at the beach or
waterfront.
When the product gets wet, it could cause fi re or electrical shock.
Unplug this unit during lightning storm.
To reduce the risk of electrical shock, do not touch the product when starts lightning.
Do not do anything that may damage the Power Cord.
Do not damage, modify, twist, forcibly bend, heat, or pull excessively the Power Cord.
Do not place heavy objects (including the unit itself) on top of the Power Cord.
If the Power Cord is damaged, contact your dealer for repairs or exchange.
Use only with designated power supply voltage.
To prevent the risk of fi re and electrical shock, operate this product only with the power supply voltage indicated on the
unit.
Beware not to drop or have any impact on the unit.
Take extra care while moving the unit.
There is no protection glass on the surface of the LCD panel. Thus, do not press the panel surface with your fi ngers or
hands. Or do not hit anything against the monitor. These actions would damage the LCD cells or the panel surface and
could cause the failure or personal injuries.
In case that you drop the unit or the cabinet is damaged, turn off the Main Power, unplug the Power Cord and contact
your local dealer immediately.
Continuing use of the product with above conditions would cause fi re or electrical shock.
Clean dust or metals on or around the blade of the power plug regulary.
Continuing use of the product with above condition may cause fi re or electrical shock.
Always unplug the Power Cord fi rst, and clean the blade with dry cloth.
Do not place the unit on an unstable surface.
Unstable places such as
Sloped place or shaky rack, table, stand or trolly.
If the unit falls down, it could cause personal injury.
Disconnect the
plug from the
power outlet.
32LD8800TA 37LD8800T
A
HITACHI
5
SAFETY PRECAUTIONS (continued)
CAUTION
Do not place the unit at the dusty place.
It could cause malfunction.
Do not cover or block any ventilation holes on the product.
The monitor would overheat, and it could cause fi re or damage the product which may shorten its service life.
Install the product in accordance with the instructions in this manual.
Do not place the unit with ventilation side down.
Do not install the unit on the carpet or bedclothes.
Do not cover the monitor with table cloth etc.
Be sure to ground the earth cable correctly.
Especially when you use Power Cord adapter, be sure to connect the earth cable to the ground terminal. Incorrect
connection would cause fi re or electrical shock.
For your safety, always make sure to unplug the Power Cord before connect or disconnect the earth cable .
Follow the Anti-tumble measures in this manual.
If the monitor tumble down, there is a risk of personal injury and possible death. Also, it would damage the product
seriously.
Do not install this product near the medical devices.
To prevent malfunction of the medical devices, do not use this product and the medical devices in the same room.
Do not place the CRT-based television near the speaker of the LCD monitor.
It could cause the partial discoloration or blurring of the image on the CRT-based television.
Please install it away from the speaker of the LCD monitor.
Disconnect all of the external connection cables and detach the anti-tumble measures before
moving the unit.
It may cause fi re, electrical shock, or personal injuries.
Connect the power plug securely.
Improper connection will cause overheat and may result in fi re.
Do not touch the blade of the plug while connecting it to the wall socket. It could cause electrical shock.
If the plug is not fi tted for the wall socket, contcat your dearly for replacement.
Do not handle the Power Cord with wet hands.
It could result in electrical shock.
Do not pull the cord when you unplug the Power Cord.
It may damage the cord and could result in fi re or electrical shock.
Hold the plug when disconnecting it.
Unplug the Power Cord when unused the product for long periods of time.
Handle the batteries properly.
Improper or incorrect use of the batteries may cause corrosion or battery leakage, which could cause fi re, personal
injury or taint damage to the property.
Use only the types of the batteries which are indicated in this manual.
Do not insatall new batteries with used ones.
Install the batteries correctly by following the polarity (+ and -) indications on the battery compartment.
Do not despose the used batteries as domestic waste. Dispose them in accordance with the local regulations.
Supply connect
the ground wire.
32LD8800TA 37LD8800T
A
HITACHI
6
ENGLISH
SAFETY PRECAUTIONS (continued)
PRECAUTIONS
Do not install the unit in high temperature.
It could damage the cabinet or parts of the product.
Do not install near any heat sources such as radiator, heat registers, stoves, or other apparatus that produce heat.
Keep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction.
Viewing Advice
The lighting of the environment in which the product is used should be appropriate. Too bright / dark environment is not good for
your eyes.
Take time to relax your eyes occasionally.
When you use this product, keep away from the monitor 3~7 times of the vertical length of the panel. This is the best viewing
distance in order to protect your eyes against eyestrain.
Adjust the volume in appropriate level, especially during the night.
When transporting this product:
When the product needs to be transported due to moving or repair, use the carton box and buffer material comes with this
product.
Do not keep this product lying sideways during transportation. It could damage the panel surface or degrade the phosphors
of the panel.
Keep away from the monitor when you use radio.
This monitor is designed to meet the international EMI standards due to prevent the interference against the radio. However,
the unit may generate noise in the radio.
If the noise is in the radio, please try the following actions.
Adjust the direction of the radio antenna in order not to receive the interference radio wave from the unit.
Keep the radio away from the monitor.
Use coaxial cable for the antenna.
About the infrared communication devices:
The infrared communication devices such as cordless microphone or cordless headphone may not be available around the monitor.
It is because of the communication failure. Please note that this is not malfunction.
When you dispose this product at the end of its life, follow the regulations at your residential area.
For more information, contact the local authority or the dealer where you purchased the product.
Cleaning and Maintenance
Please make sure to unplug the power cord before cleaning the monitor.
How to clean the LCD panel of the monitor.
Wipe the panel with a lint-free and dry cloth in order to prevent damage to the panel surface.
Do not use a chemical cloth or cleaner. Depending on the ingredients, it may cause discoloration and damage the panel surface.
Do not wipe with a hard cloth or rub hard. It may hurt the panel surface.
In case of the greasy dirt such as fi ngerprint, wipe with a lint-free cloth moistened by a diluted neutral detergent solution, and then
wipe with a soft and dry cloth.
Do not use a spray cleaner. It could cause malfunction.
How to clean the cabinet of the monitor.
The following may cause crack, deformation, and paint peeling.
Do not wipe the cabinet with benzene, thinner, and other chemical products.
Do not spray volatile solutions such as insecticide over the cabinet.
Do not leave the cabinet in prolonged contact with plastic or rubber materials.
Do not use a chemical cloth, cleaner or wax. Depending on the ingredients, it may cause crack and deformation.
Use a lint-free cloth to clean the cabinet and control panel of the monitor. In case of the heavy dirt, wipe with a soft cloth moistened
by a diluted neutral detergent solution, and then wipe with a soft and dry cloth.
Never use the following detergents. It could cause crack, discoloration, and scratch.
Acid/ alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc.
32LD8800TA 37LD8800T
A
HITACHI
7
ABOUT LCD PANEL
Common phenomena of LCD Panel
The following are the common phenomena when operating LCD Panel due to its structural reason.
Please note that they are not malfunctions.
Defective Spots on Panel
The LCD panel is manufactured with high-precision technology. However, there might be some spots that are not
emitted, brighter than the others, or in different colors, etc.
Surface on Panel
The LCD panel displays images by blinking the fl uorescent lamps internally. This could raise the temperature of the
display surface.
In addition, do not impact strongly on the surface of the panel because LCD panel is made with fi ne processing
glass.
Residual image
When a still image or menu is displayed on the screen for a short time (about a minute) and then switches to another
image, it may leave an “after-image” on the screen.
The residual image will disappear on its own.
The Usage under the Low Temperature Environment
Because of the structural characteristics of the LCD panel, the response speed of the LCD panel becomes slower
when the ambient temperature around the monitor becomes too low. In some cases, it may cause the residual
image.
The residual image will disappear on its own as the temperature goes up and back to normal.
32LD8800TA 37LD8800T
A
HITACHI
8
ENGLISH
FEATURES
Enjoy not only beautiful and high quality pictures on the display, but also various kinds of useful and convenient
functions in your daily life!
Large-screen and high-defi nition LCD panel.
Improved Digital signal processor.
High quality sound with deeper, richer and dynamic bass tones.
Accept more digital input devices with 2 HDMI terminals.
Great diversity of connecting terminals to cover wide range of audio-visual equipments.
Enjoy the image from PC with large, high-defi nition LCD screen.
New Photo Input function with selectable Background Music.
SD Card Slot installed.
Easy-to-use On-Screen Display system operating with Remote control.
Low power consumption with Power Saving feature.
Motorized Power Swivel feature. (Desktop stand is optional for 37LD8800TA.)
SUPPLIED ACCESSORIES
Check the supplied accessories before installation.
In case of missing or damaged, please contact the dealer immediately.
*The type of power plug provided may be different from this drawing for some countries.
OPTION
Ask your local dealer for further details.
Desktop Stand : SD8G4237 (for 37LD8800TA)
User Manual Remote Control AA size batteries
X2
Power Cord
(BS Type)*
32LD8800TA 37LD8800T
A
HITACHI
9
COMPONENT NAMES
Main Unit
Front Panel
q
Cabinet
w
Panel
e
Indicating Lamp
r
Remote Control Receiver
t
Speaker
y
Main Power Switch (on the bottom surface)
u
Desktop Stand (optional for 37LD8800TA)
Rear Panel
q
Handgrips
w
Side Input
e
Terminal Board (External Device Connection)
r
Power Cord Socket
t
Control Panel (see below for details)
Please refer to
13
~
17
for the detailed
information for the connections.
Control Panel (including Card Slot)
q
SD Memory Card Slot
w
Sub Power button
e
Channel UP/▲button
r
Channel DOWN/▼button
t
Volume UP
/►button
y
Volume DOWN
/◄button
u
Input Select /OK button
i
Menu / Return button
q
w
e
OK
P
P
SD MEMORY
CARD
PUSH-EJECT
PH35814
w
e
r
t
y
u
i
q
u
q
w
r
t
y
e
r
w
e
t
qrq
t
32LD8800TA 37LD8800TA
32LD8800TA 37LD8800T
A
HITACHI
10
ENGLISH
COMPONENT NAMES (Continued)
Remote Control
q
Sub Power
w
Function Select (TV/DVD/SAT)
Press this button to select function mode
indicating LED lamp.
Normally, select “TV”.
e
Input Select/DVD Control/Photo Input Control
Press this button to change input mode.
In addition, you can use these buttons while
operating the selected brand of DVD player or
Photo Input function.
r
Menu
t
Cursor
y
OK
u
Sound Mode
Sound mode can be changed each time pressed
in the following sequence. Movie→Music→
Speech→Favorite
i
CHI/II
This is exclusively for TV audio A2/NICAM mode.
o
Volume Up/Down
a
Program Select
Press these buttons to select a TV program
directly.
s
Freeze/Multi Mode [Hold]
Press this button to change the picture to freeze
mode. Press it again to return to normal picture.
In addition, during multi-picture mode, each time
press this button, the picture is changed to 2, 4,
and 12 multi mode.
d
[Color (Red, Green, Yellow, Blue)]
f
[Index]
g
Time [Cancel]
Pressing this button can indicate the time by On-
Screen display when receiving a TV program on
the screen.
h
TV/Text [TV
Text]
This switches between the TV mode and the
Teletext mode.
j
Zoom [Text
TV+Text]
Press this button to change picture size.
k
Recall
Pressing this button shows the input signal
status.
l
Return
You can use this to return to the previous menu.
1(
Picture Mode
Picture mode can be changed each time pressed
in the following sequence. Dynamic→Natural→
Cinema
2)
Channel Up/Down
2!
Mute
2@
Multi Picture
Press this button to change the picture to multi-
picture mode. Press it again to return to normal
picture.
2#
Photo Input (Photo/Rotate/Slide Show)
These buttons are to display and control the
pictures from digital still camera or USB card
reader.
2$
Swivel (
Desktop Stand is optional for 37LD8800TA.
)
This function is to rotate TV. Select the degree
of rotation with cursor key.
NOTE
Some buttons are only for Teletext mode, and other buttons have different functions in Teletext mode from
the use of TV mode. Those buttons are indicated by [ ]. Refer to "About Teletext" on
37
.
q
w
e
r
t
y
u
i
o
a
s
d
g
h
j
f
k
l
1(
2)
2!
2@
2$
2#
32LD8800TA 37LD8800T
A
HITACHI
11
Caution When Moving the Main Unit
As this product is heavy, whenever it is moved, two people are required to transport it safely.
When transferring the unit, hold the unit by using the handgrips at the backside of the panel. (See the fi gures below
for details.)
32LD8800TA:
PREPARATION
Remote Control Batteries Installation
This remote control operates on 2 “AA” batteries.
1. Open the battery compartment cover
Slide open the battery compartment cover on the backside of the
remote control in the direction of an arrow.
2. Install the batteries
Install 2 “AA” batteries (included) making sure the polarities match
the indication inside the compartment.
3. Close the battery compartment cover.
To close the battery compartment cover, slide the cover in the
direction of an arrow till it clicks shut.
CAUTION
It could cause corrosion or battery leakage and may result in physical injury
and/or property damage including fi re.
Never mix used and new batteries in the device.
Replace all the batteries in a device at the same time.
Remove the batteries if the remote control is not going to be used for an extended period of time.
To avoid possible failure, read the following instructions and handle the
remote control properly.
Do not drop or have an impact on the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on the wet object.
Do not place the remote control under the direct sunlight or near sources of excessive heat.
37LD8800TA:
Handgrips
Handgrips
32LD8800TA 37LD8800T
A
HITACHI
12
ENGLISH
PREPARATION (continued)
Safety Precaution on Main Unit Installation
Read SAFETY PRECAUTIONS (
3
to
6
) carefully besides this page.
*When installing the monitor, use the Desktop Stand (SD8G4237/ optional for 37LD8800TA). Please refer to the user
manual of the stand. The Desktop Stand has been used for the illustration in this manual.
Anti-Tumble Measures
Install in a stable place and implement safety measure against overturning.
When installing the main unit, be sure to use the specifi ed mount units in order to obtain maximum performance
and maintain the safety.
We assume no responsibility or liability for personal injuries or property damages caused by use of other mount
units or improper installation.
As for the installation instruction, please read each user manual of the mount units: for Desktop Setup, Wall
Mounting, and Ceiling Mounting.
In case of using Wall or Ceiling Mounting unit, by contacting your local dealer, ask the specifi ed installation
specialist to set up. Never attempt to install it by yourself. It could cause injuries or damages.
Please leave the adequate space around this monitor in
order to avoid increasing the internal temperature and
keep safety while using swivel function.
Make sure not to block any ventilation holes.
Do not install the monitor in the small space such as
inside the rack, closet or the box.
Leave more than 10cm of clearance from each side of
monitor and 30cm from the top of monitor to wall.
Without Swivel function: Leave at least 10cm of clearance
behind rear monitor.
With Swivel function: Leave the adequate space to obtain
the maximum performance of Swivel Function.
(32LD8800TA:25cm/ 37LD8800TA:29cm)
Refer to
36
for Swivel Function.
10cm or more*
Cord
or
chain
Clamp
Securing to a wall or pillar
Using a commercially available cord, chain, and
clamp, secure the set to a wall or pillar.
hook
cord or chain
screw
cord or chain
clamp
Wall or Pillar
Securing on desktop
Use two wood screws to secure the set fi rmly in
position by fastening them to the screw holes at the
rear of the stand as shown in the diagram.
For 32LD8800TA, please get
the commercially available
wood screws for the stand.
For 37LD8800TA, the wood
screws are supplied with the
optional stand.
Two places
Wood screw
Securing to ceiling
Using a commercially available cord, chain, and clamp, secure the set to a ceiling.
NOTE
For more information regarding the mounting of the unit, please contact your dealer.
Loosen a cord or chain enough while operating power swivel to avoid physical injury.
10cm
or more
10cm
or more
30cm
or more
32LD8800TA 37LD8800T
A
HITACHI
13
CONNECTION
Terminal Positions
Rear
q
Power Cord Socket
w
Aerial Socket
e
AV1
r
AV2
t
AV3
y
AV4
u
Monitor Out and Sub Woofer
i
Service use only
o
Power Swivel Terminal
(see
36
)
a
PC Connection terminals
(D-sub 15 pin and mini stereo for
Audio)
s
HDMI1, 2 and mini stereo for Audio
Side
d
AV5
f
Headphone input
g
Photo Input terminal
h
SD Memory Card slot
Connecting Procedure
Your monitor is ready for various kinds of connections. Make a connection in the following steps. Be sure to turn off
the Main Power fi rst when connecting external equipments.
1. Connect Power Cord to the rear panel.
2. Connect Aerial Lead.
3. Connect your external equipments to the monitor if any.
4. Connect the Power Plug to the Wall Socket.
1. Connecting Power Cord to the Rear Panel
Connect Power Cord to the monitor.
* Make sure not to connect the Power Plug to the Wall Socket until
all connections are completed.
2. Connecting Aerial Lead.
There are two ways to connect Aerial Lead.
q
When you do not have any other external equipment:
Connect the Aerial Lead directly into the Socket at rear panel.
w
When you have one or more external devices to connect:
1. Use RF cable to connect between each equipment and Antenna.
2. Connect the Aerial Lead to an equipment‘In’Socket marked
3. Connect the RF cable from the equipment ‘Out’ to the other equipment ‘In.’
4. Then, connect from the equipment ‘Out’ to “ANT” on the LCD screen Socket on marked
.
VCR
STB
IN
OUT
IN
OUT
OK
P
P
SD MEMORY
CARD
PUSH-EJECT
PH35814
INPUT(AV5)
R
L/MONO
AUDIO
VIDEO S-VIDEO
PH35826
Licensed by BBE Sound, Inc. under USP5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
WOW, SRS and symbol are trademarks of SRS Labs, Inc.
SERVICE USE ONLY
INPUT(RGB)
ANALOG RGB
INPUT(HDMI)
PC
AUDIO
AUDIO
A C
INPUT
(AV1)
INPUT
(AV2)
INPUT
(AV3)
INPUT
(AV4)
ANT
OUTPUT
AUDIO AUDIO AUDIO AUDIO AUDIO
L
MONO
C
L
MONO
C
L
MONO
C
LL
MONO
C
RRRRR
VIDEO
VIDEO
VIDEO
PB
PR
PB
PR
Y/VIDEO Y/VIDEO
S-VIDEO
SUB
WOOFER
POWER SWIVEL
HDMI2
HDMI1
q
w
ert yu
i
o
a
s
h
g
f
d
[Example: Connecting Antenna
through STB and VCR]
Precautions when connecting the aerial
Please use a coaxial cable which is free from interference to connect the aerial. Avoid using a parallel fl at feeder
wire as interference may occur, causing reception to be unstable and stripe noise to appear on the screen.
Avoid using indoor aerial as this may be affected by interference. Please use CATV net or outdoor aerial.
For safety, install an external aerial conforming to AS1417.1 (applicable for Australia only)
If there are noise appearance in the picture of VHF-Low band channel, please use the double-shielded cable (not
provided) for RF LEADS to reduce the noise.
32LD8800TA 37LD8800T
A
HITACHI
14
ENGLISH
CONNECTION (continued)
Connecting Procedure (continued)
3. Connecting to External Equipment
Terminals on Rear
A
V1 and AV2
can be connected to the equipment with either Component or Composite output. Depending on whether the
Y/VIDEO input of your selected equipment is Y signal or Video signal, it automatically regards as Component or Composite.
When using as Composite, do not insert the jacks into P
B
or P
R
.
If your external device has a Component terminal, COMPONENT connection is recommended for higher quality picture.
AV3 can be connected to the equipment with an S-Video output and Composite output.
If your external device has a S-video terminal, S-VIDEO connection is recommended for higher quality picture.
AV4 can be connected to the equipment with composite output.
VCR
DVD player
Set-Top Box
PB
PR
Y/VIDEO
AUDIO
L
MONO
C
R
VCR
DVD player
Set-Top Box
AUDIO
L
MONO
C
R
S-VIDEO
VIDEO
VCR
DVD player
Set-Top Box
AUDIO
MONO
C
R
VIDEO
L
[Example]
[Example]
[Example]
IN OUT
IN OUT
IN OUT
32LD8800TA 37LD8800T
A
HITACHI
15
CONNECTION (continued)
Connecting Procedure (continued)
Monitor Out can be used to display same image as main unit on another monitor.
When this output terminal is connected to an external monitor with a 75 Ohm terminal, the same image from
composite(AV1~5), or S-Video(AV3,5), or RF signal can be displayed to the external monitor.
Sub Woofer terminal can bring the deep bass sound from the external speaker.
PC terminals (D-sub 15 pin + audio) is connected to PC, which allows Analog RGB signal.
HDMI 1
2
terminals can be connected to the devices with HDMI output, or if the external device has DVI output, this can be
available with HDMI-DVI conversion cable. In case of using the HDMI-DVI, connect to audio terminal besides HDMI.
Information
HDMI(High Defi nition Multimedia Interface) is next-generation multimedia I/O interface. Only one cable is used to
transmit all video/audio/control signals, which creates easy connection.
Moreover, those digital signals can produce high quality data without any degradation.
You are provided two HDMI terminals, one of the most remarkable features.
If your external device has a HDMI terminal, HDMI connection is recommended for higher quality picture and sound.
NOTE
When both HDMI 1 and HDMI 2 terminals are connected to devices via HDMI-DVI conversion cable, HDMI 2 has
a priority over the audio terminal.
VCR
DVD player
AUDIO
R
VIDEO
L
[Example]
OUT IN
[Example]
or
IN OUT
(Mini Stereo plug)
VCR
DVD player
Set-Top Box
or
HDMI2
HDMI1
[Example]
IN OUT
(HDMI) (DVI)
(HDMI) (HDMI)
(Mini Stereo plug)
SUB
WOOFER
[Example]
OUT
IN
or
32LD8800TA 37LD8800T
A
HITACHI
16
ENGLISH
CONNECTION (continued)
Connecting Procedure (continued)
Terminals on Side
Since the following terminals are located on the side, it is very convenient to use the extra device on a temporary
basis after done the connections on the rear panel.
AV5 can be connected to the equipment with an S-Video output and composite output.
If your external device has a S-video terminal, S-VIDEO connection is recommended for higher quality picture.
Headphone The detail settings can be adjusted from Audio Menu on page
35
.
The audio from the speaker will be muted when connecting the headphone to this terminal.
Photo Input terminal can be connected to digital still camera or USB card reader with USB cable. For details, refer
to the Photo Input function shown on
45
~
50
.
SD Memory Card slot can be used for the Photo Input function with the SD (or MMC) card memory containing
pictures. For details, refer to the Photo Input function shown on
45
~
50
.
SD MEMORY
CARD
PUSH-EJECT
SD Card / MMC
VCR
DVD player
Home video game system
INPUT(AV5)
R
L/MONO
AUDIO
VIDEO S-VIDEO
Camcorder
[Example]
IN OUT
Digital Camera
USB Card reader
PHOTO
INPUT
[Example]
IN OUT
(Mini Stereo plug)
32LD8800TA 37LD8800T
A
HITACHI
17
CONNECTION (continued)
Connecting Procedure (continued)
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated(AC100-240V, 50/60Hz). It may cause fi re or electric shock.
For the LCD panel, a three-core power cord with a ground terminal is used for effi ciency protection. Always be sure to
connect the
Power Cord
to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you
use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ensure that both ends of power cord are easily accessible.
If you have to change the power cord, please use the certifi ed power cord that meets your region’s safety standard.
Information
How to secure the cables.
After connecting all of the cables to the terminals, secure them with the band.
When you secure the cables, please be careful not to tighten too much.
How to fasten the band:
To tighten
To loosen
Pull the band in the
direction of the arrow.
Loosen the band by
pushing the knob in the
direction of the arrow.
Knob
With long band
SUB
WOOFER
Licensed by BBE Sound, Inc. under USP5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
WOW, SRS and symbol are trademarks of SRS Labs, Inc.
SERVICE USE ONLY
INPUT(RGB)
ANALOG RGB
INPUT(HDMI)
PC
AUDIO
AUDIO
A C
INPUT
(AV1)
INPUT
(AV2)
INPUT
(AV3)
INPUT
(AV4)
ANT
OUTPUT
AUDIO AUDIO AUDIO AUDIO AUDIO
L
MONO
C
L
MONO
C
L
MONO
C
LL
MONO
C
RRRRR
VIDEO
VIDEO
VIDEO
PB
PR
PB
PR
Y/VIDEO Y/VIDEO
S-VIDEO
POWER SWIVEL
HDMI2
HDMI1
32LD8800TA 37LD8800T
A
HITACHI
18
ENGLISH
BASIC OPERATION
Power On/Off
Now, turn On the main power of the unit. Make sure that the Power Cord
has plugged into the wall socket.
To turn On the power of the monitor:
1. Press the Main Power switch on the monitor.
The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote
control.
The color of the Indicating Lamp turns into Green, and the image will
display on the screen.
To turn Off the power of the monitor:
1. Press Sub Power button either on the control panel or on the remote
control.
The image disappears from the screen and the Indicating Lamp turns
into Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
The Indicating Lamp Status Check
Indicating Lamp
Status
Power Status Power Switch Status
Off Off Main power → Off
Red Standby mode
Main power → On
Sub Power button → Off
Green On
Main power → On
Sub power button → On
Orange Power Save mode*
Main power → On
Sub Power button → On
* About Power Save mode, see “Power Save Mode” and “When Following Messages Appear on the Screen” on
52
and
54
for details.
NOTE
If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on
54
~
56
. It
may help you to solve the problems.
You can turn ON the power only by pressing the Sub Power button during the Standby mode.
Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a blackout during use of the unit.
Main Power switch (on the bottom surface)
Sub Power button
Sub Power button
P
P
SD MEMORY
CARD
PUSH-EJECT
OK
PH35814
32LD8800TA 37LD8800T
A
HITACHI
19
BASIC OPERATION (continued)
First Time Setup
When you turn ON the TV for the fi rst time, your TV automatically leads to the settings
of “Language” and “Auto Tuning.”
1. The fi rst screen appeared will ask you to choose the language of your TV’s display.
2. Select the language you preferred from the list and press
OK
button.
3. Once selecting the language, “Auto Tuning” screen appears to start scanning
channels.
NOTE
If you want to change the setting after completing this fi rst time setup, press
MENU
button and set up individually. Refer to
21
22
.
Volume UP/DOWN
1. To increase the sound volume, press button on the remote control,
or Volume Up button on the control panel.
The Volume Indicator value on the screen will shift right.
2. To decrease the sound volume, press
button on the
remote control or Volume Down button on the control panel.
The Volume Indicator value on the screen will shift left.
Mute
1. To mute the sound, press button on the remote control.
The sound of the unit is temporarily turned Off.
The color of the Volume Indicator will turn into magenta
while muting the volume.
2. To turn the sound back, press
button again, or Volume Up button on
either remote control or the control panel.
The color of the Volume Indicator will turn back to green.
NOTE
You can decrease the volume by pressing
button
while muted the volume.
Setup
Auto Tuning
Scanning Channel Number: 33
Cancel
OK
Cancel
P
P
SD MEMORY
CARD
PUSH-EJECT
OK
PH35814
Volume Up button
Volume Down button
The Volume Indicator
Volume 15
Language
ޓޓޓޓޓ
English
ޓޓޓޓޓޓ૕ਛᢥ
ޓޓޓޓޓ❥㜚ਛᢥ
ޓޓޓޓޓ
Руссkий
ޓޓޓޓޓ
ޓޓޓޓޓᣣᧄ⺆
Select Return Exit
Volume Up/Down button
Mute button
32LD8800TA 37LD8800T
A
HITACHI
20
ENGLISH
BASIC OPERATION (continued)
Input Switching to TV/AV1~5, HDMI, and RGB
By pressing Input Select button, you can switch the input.
To watch actual broadcast, press Input Select button on the control panel,
the numeric buttons or Channel Up / Down button on the remote control.
To display the image outputting from the external equipments
connected to each terminal (AV1~5, HDMI 1, 2, and RGB), select
corresponding mode.
1. Press Input Select buttons on the remote control.
2. The Input modes can be also switched by using Input Select button
on the control panel.
Each time this button is pressed, the screen displays corresponding
mode by following order.
TV AV1 AV2 AV3 AV4
AV5HDMI 1HDMI 2RGB
3. To directly go back to TV mode, pressing channel Up/Down buttons on
either remote control or the control panel.
Also, you can use the numeric buttons on the remote control.
Input Signal Screen Display
The input signal status can be displayed on the screen by
pressing the
button
of the remote control.
The display will go out in approximately 6 seconds.
Channel Up button
Channel Down button
Input Select
P
P
SD MEMORY
CARD
PUSH-EJECT
OK
PH35814
Input Select buttons
Channel
Up/Down button
1
ABCDE
-- -- Min.
-- -- : -- --
OFF
Off-timer
On-timer
TV position
Name
Sound mode
TV
AV1
Composite
-- -- Min.
-- -- : -- --
OFF
Off-timer
On-timer
Input mode
Signal mode
VIDEO
RGB
H : 48.4kHz
V : 60.1 Hz
-- -- Min.
-- -- : -- --
OFF
Off-timer
On-timer
Input mode
Input horizontal frequency
Input vertical frequency
RGB
RECALL
button
32LD8800TA 37LD8800T
A
HITACHI
21
MENU OPERATION
How to use the On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions in this product.
Basic Operation
1.
Press
MENU
button on the remote control or Menu button on the control panel
of the unit. The Main Menu is displayed on the screen as shown on the right.
2. To select the item, press ▲ or ▼ buttons.
The selected item will be highlighted in Green.
3. Press
OK
button to set your selection.
The selected menu page will be displayed on the screen.
4. Use ▲ or ▼ buttons to choose the item on the MENU page.
Press
OK
button to set your selection.
5. Use ◄ or► buttons to adjust the item values or choose options.
Press
OK
button to set your selection.
6. To exit from the menu, press
MENU
button.
NOTE
The OSD menu screen will be closed automatically when no operation has
been made for about one minute.
Language Menu
Select the language from the list so that you can display the OSD menu in the selected language.
How to set Language
1. Enter the “Language” menu from the Main Menu.
2. Select the appropriate language with ▲ or ▼ button from the list.
The selected item will be highlighted in Green.
3. Press
OK
button to set your selection.
The black dot is marked inside of the circle when the selection is fi xed.
4. Press
MENU
button to exit from the entire OSD menu.
<Main Menu>
Picture
Audio
Timer
Function
Setup
Language
Select OK Set
P
P
SD MEMORY
CARD
PUSH-EJECT
OK
PH35814
Menu button
Language
ޓޓޓޓޓ
English
ޓޓޓޓޓޓ૕ਛᢥ
ޓޓޓޓޓ❥㜚ਛᢥ
ޓޓޓޓޓ
Руссkий
ޓޓޓޓޓ
ޓޓޓޓޓᣣᧄ⺆
Select Return Exit
Menu button
32LD8800TA 37LD8800T
A
HITACHI
22
ENGLISH
MENU OPERATION (continued)
Setup Menu (TV mode)
With this menu, you can access various kinds of features relating to TV channel settings.
Selected Items Setup hint
Auto Tuning
Mode
Position
Select the way to display the channels on the screen.
The position numbers are displayed on the screen.
(1~199, AV00)
Direct
The channel number 0~99 are displayed as C , and the
channel number 100~199 are displayed as S .
Search
Tune the local channels automatically.
Press
OK
button to start searching.
Manual Tuning
Position
Press channel up (+)down(-) buttons to input position
number (1~199, AV00) or channel number (C or S ).
Frequency
When Auto Tuning Mode is set to [position], search the
frequency by using ◄► buttons.
When Auto Tuning Mode is set to [Direct], this function is
not available (grayed out).
Name
1. Move the cursor to the fi rst digit and select the letters
with ▲▼ buttons.
2. Move to the next digit with ► button.
3. Press
OK
button again when you fi nish inputting all the
letters.
The selectable letters are as follows: “0”~”9”, “A”~”Z”, “+”,
“ ” (blank), “-” (displayed as blank), “,” (comma), and “.”
(period).
Sound
System
Auto
Select the sound system from 5 different modes.
M
BG
I
DK
Information
AV00 is useful when connecting to equipments such as VCR which its antenna terminal can output the specifi ed
channel frequency.
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Auto Off Off
Select OK Set Return
32LD8800TA 37LD8800T
A
HITACHI
23
MENU OPERATION (continued)
Setup Menu (TV mode) (continued)
Selected Items Setup hint
Manual Tuning
Color
System
Auto
Select color system from 5 different modes.
PAL
SECAM
NTSC4.43
NTSC3.58
Skip
Off
It allows you to skip unregistered channels automatically
when you use channel up (+) down (-) buttons to select
channels.
Regarding the unavailable channels, this function will be
set to [On] automatically to skip.
On
NR
Off
The noise on the screen or interference could be reduced,
especially at the area of weak electric fi eld.
On
Antenna Att.
Off
The noise on the screen or interference could be reduced
in case that the receiving airwaves are too strong.
The selection on this item is applied to all the channels.
On
Fine Tuning -56~+56
► : Increase the frequency data for the main tuner.
◄ : Decrease the frequency data for the main tuner.
Sort
You can change the order of channels as follows.
1. Move the cursor to the Channel row you want to
change order and then, press
OK
button.
2. The color of the letters on the designated line will be
turned into green bracket and with [ ].
3. Move the designated row by using▲▼buttons.
4. Press
OK
button to fi x the position.
This function is not available (grayed out) when the Auto
Tuning Mode is set to [Direct].
Teletext Language
Select Teletext Language from 4 different categories (West
Europe, East Europe, Cyrillic, and Arabic) according to
the area.
Example:
West Europe : Asian countries where the Teletext
is broadcasting in English such as
Singapore, Australia, and Malaysia.
East Europe : Poland, Sweden, Hungary
Cyrillic : Russia
Arabic : Arab countries
Auto Off
Off
When no airwave has been received and no operation
has been made for 10minutes in TV mode, it turns to
standby mode automatically.
On
32LD8800TA 37LD8800T
A
HITACHI
24
ENGLISH
MENU OPERATION (continued)
Setup Menu (AV mode)
With this menu, you can select or adjust the condition of the input signals from each terminal.
Selected Items Setup hint
System
System 1
Do not change the original setting.
(System1: Europe/Asia, System2:North America)
Composite and S-video input only.
System 2
Color
system
AV1~AV5
System 1
Auto
Select the color system depending on the input signal.
Generally, select [Auto].
In case that the input signal has too much noise, the
signal level is too low, or the operation is unstable in
[Auto], select the system according to the color system
of the input signal.
Composite and S-video input only.
PAL
SECAM
NTSC4.43
NTSC3.58
System 2
Auto
NTSC-M
PAL-M
PAL-N
Video
Input
AV1, AV2
Auto
Select the colorimetry depending on the input signal.
Generally, select [Auto].
In case that the input signal has too much noise, the
signal level is too low, or the operation is unstable in
[Auto], set this to match the input signal.
Component Input only.
HDTV
SDTV/DVD
Setup
System System 1
Color System
Video Input
Select Set Return
32LD8800TA 37LD8800T
A
HITACHI
25
MENU OPERATION (continued)
Setup Menu (RGB mode)
With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.
By pressing ▼button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.
Selected Items Setup hint
Auto Adjust
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
Press
OK
button to start auto adjustment.
The message “Auto Adjusting” is displayed.
Depending on the type of the signal, there is a possibility
that the display may not be adjusted in its optimum
condition with this function. In that case, please adjust
each item manually.
Horizontal Position* -63~+63
Adjust the display position horizontally.
When the position exceeds the possible range, the
display color will turn into Magenta.
Vertical Position* -31~+31
Adjust the display position vertically.
When the position exceeds the possible range, the
display color will turn into Magenta.
Horizontal Clock* -31~+31 Minimize the vertical stripes on the screen.
Clock Phase* 0~63
Minimize the blurring of the letters and stripes on horizon-
tal row.
Make sure to adjust Horizontal Clock fi rst before
adjusting Clock Phase.
Reset
Reset all the set values on this Menu page to original fac-
tory settings.
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position +31
Horizontal Clock –20
Clock Phase 10
Reset Reset
Select Return Exit
Setup
Input Level 0.7V
Frequency Display Off
WVGA Type Off
WXGA Mode Off
Vertical Filter On
Frequency Mode PC
Select Set Return
32LD8800TA 37LD8800T
A
HITACHI
26
ENGLISH
MENU OPERATION (continued)
Setup Menu (RGB mode) (continued)
Selected Items Setup hint
Input Level
0.7V Normally, select [0.7V].
Select [1.0V] only when the whole display becomes too
white.
1.0V
Frequency Display
Off
Select whether indicating the PC signal frequency infor-
mation on Input Signal Screen Display or not.
On
WVGA Type
Off
It allows you to switch display size to [Full] and [Real]. (See
“Size Switching” on
39
for the details.)
This function is available only for WVGA signal.
Refer to “Recommended Signal List” on
59
.
On
WXGA Mode
Off
This function is available only for WXGA signal.
Refer to “Recommended Signal List” on
59
.
1280x768
1366x768
Vertical Filter
Off
Reduce the fl ickers on the screen when set to [On].
On
Frequency Mode
PC
This mode is not available (gray out).
Movie
Information
The items indicated by “
*
” can be automatically stored the setting depending on the signal mode.
The signal mode is identifi ed by the Horizontal/Vertical frequency and the sync. signal polarity, which has almost
same values in all the above items might be regarded as the same signal.
The item “Auto Adjust” cannot be stored. Press
OK
to start auto adjustment as needed.
32LD8800TA 37LD8800T
A
HITACHI
27
MENU OPERATION (continued)
Function Menu
This menu provides various ways to protect your panel, reduce power consumption, and set up utilizing the useful
functions, such as Freeze Mode and Photo Input.
Selected Items Setup hint
Black Side Panel
Off
This can change the color of sidebars showing up in
normal mode. (Off:gray, On:black)
It is recommended to set Off to reduce image retention.
Please note that it is not available while operating Photo
Input function.
On
Video Power Save
Off
During AV input, this helps to reduce power consumption
when there is no video signal. In case of selecting AV
input terminal which does not have signal input, it changes
the power status to power save mode in AV1/AV2 and
standby mode in other AV input. (See
52
in details.)
On
Freeze Mode
Split
This is the useful function to watch the program in both
still and active pictures. (See
44
in details.)
Split: half sized images
Strobe: thumbnail sized images
Strobe
Default Zoom
Panoramic
You can set the display size for TV / AV input screen
appearing fi rst when turning the main power On.
4:3
Full
Picture Size
1
In case that the image from TV signal (especially CATV) has
a blackened gap in either or both side during Panoramic
mode, select [2] so that it can make up for the gap.
This is not
available
when displaying
“Cinema” size.
This is not available except RF, composite, and
component (576i, 480i) input. (gray out)
2
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
OK
button.
Function
Black Side Panel Off
Video Power Save Off
Freeze Mode Split
Default Zoom Panoramic
Picture Size 1
Reset Reset
Select Set Return
Function
Background 1
Slide Effect 1
Slide Interval 5Sec.
Slide Music Off
Slide Mode 1
Reset Reset
Select Set Return
32LD8800TA 37LD8800T
A
HITACHI
28
ENGLISH
MENU OPERATION (continued)
Function Menu (continued)
Selected Items Setup hint
Background
1
This is available only for Photo Input function. Switch the
pattern of background. See details on
49
.
2
Slide Effect
Off
This is available only for Photo Input function. You can
select the method of switching slides during slide show.
See details on
47
.
1
2
Slide Interval
5Sec.
This is available only for Photo Input function. You can
select the interval time for switching slides during slide
show. See details on
47
.
10Sec.
30Sec.
Slide Music
Off
This is available only for Photo Input function. You can
select the preferred Background Music during slide show.
See details on
47
.
1
2
Slide Mode
1
This is available only for Photo Input function. You can
select where to start the slide show. See details on
47
.
2
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
OK
button.
32LD8800TA 37LD8800T
A
HITACHI
29
MENU OPERATION (continued)
Picture Menu (TV/AV mode)
In this menu, you can make specifi c adjustments for the picture based on your preference.
By pressing ▼button at the bottom of each menu page, the next Picture menu page will appear on the screen.
Selected Items Setup hint
Picture Mode
Dynamic
You can make the better selection from 3 modes
depending on the lighting condition and intended use.
Dynamic: Suitable for the brighter conditions.
Natural : Suitable for the normal lighting condition.
Cinema : Suitable for watching movie.
Natural
Cinema
Contrast*
-31 +31
(+32 +40)
This adjusts the contrast to meet the lighting environment
by using ◄►.
The maximum value can be extended to [+40] by
pressing and holding ► button at [+31], which changes
the color between those numbers from green to
magenta. This is the special feature prepared for the
dark scene. At the normal condition, it is recommended
to set the value less than [+31] .
Brightness* -31 +31
With this function, black is adjusted to change the overall
brightness by using ◄►.
Color* -31 +31
It can adjust color density based on your preference by
using ◄►.
Sharpness* -15 +15
Preferred sharpness can be adjusted by pressing ◄
button for Softer image or ► button for Sharper image.
Tint* -31 +31
Pressing ◄ button enhances red and weakens green,
while pressing ► button weakens red and enhances
green. The setup hint is adjusting for the realistic skin
color. This is not available (grayed out) when receiving
PAL/SECAM signal.
Color Temperature*
Cool
You can select from 4 settings (default) depending on the
color condition with ◄► buttons.
Normal
Warm
Black/White
Picture
Picture Mode Dynamic
Contrast +31
Brightness –31
Color 0
Sharpness +15
Tint 0
Color Temperature Normal
Contrast Mode Normal
Back Light +20
Reset Reset
Select OK Set Return
Picture Dynamic
YNR Off
CNR Off
Film Mode On
3D Comb Filter Off
LTI Off
CTI Off
Black Enhancement Off
Auto Color Off
Reset Reset
Select OK Set Return
Picture Dynamic
Color Temp. Adjust
Color Management
Color Decoding
Select OK Set Return
32LD8800TA 37LD8800T
A
HITACHI
30
ENGLISH
MENU OPERATION (continued)
Picture Menu (TV/AV mode) (continued)
Selected Items Setup hint
Contrast Mode*
Dynamic
It allows you to choose from 3 modes.
Dynamic: Sharpen the gradation to improve the contrast
feeling.
Normal: Reproduce as faithful gradation as possible.
Auto: Adjust to natural brightness without blurred white by
detecting the bright parts on images.
Normal
Auto
Back Light -20~+20
Adjust the brightness of the Back Light for the maximum
visibility.
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
OK
button.
YNR*
Off
This is a noise reduction system for picture signal.Low
High
CNR*
Off
This is a noise reduction system for color signal.Low
High
Film Mode*
Off
On: Automatically identify if it is the movie fi lm and
faithfully reproduces the original fi lm images.
Off: Set to Off if the image does not look natural during
turning on.
On
3D Comb Filter*
Off
This is available only when receiving NTSC/PAL
composite signal. This reduces the dot and color blurring
in minute scales so that it can reproduce purer color.
Low
High
LTI*
Off
Adjusts the sharpness of the picture signals.
Low
Middle
High
CTI*
Off
Adjusts the sharpness of the color signal.
Low
Middle
High
Black Enhancement*
Off
Adjusts the black level compensation.
Low
Middle
High
Auto Color*
Off
This monitors and adjusts the color to maintain constant
color levels. It also maintains natural fl esh tones while
preserving fi delity of background colors. This is available
only when receiving an NTSC composite and S.Video
signal.
On
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
OK
button.
32LD8800TA 37LD8800T
A
HITACHI
31
MENU OPERATION (continued)
Picture Menu (TV/AV mode) (continued)
Selected Items Setup hint
Color Temp. Adjust**
On
Amplitude
On: When you want to set specifi c adjustments in each of
the 4 Color Temperature modes. You can adjust on
the amplitude and cut off. The settings refl ect on the
Color Temperature.
Amplitude: subdue the following colors on the brighter
parts.
Cut off : subdue the following colors on the darker
parts.
Off: Remains as default setting.
Red
Green
Blue
Cut off
Red
Green
Blue
Off
Color Management**
On
Magenta
On: Turn On to adjust the balance of each colors
depending on the user’s preference. The settings
refl ect in each of the 4 Color Temperature modes.
Off: Remains as default setting.
Red
Yellow
Green
Cyan
Blue
Off
Color Decoding
RGB/R/G/B
This can adjust R/G/B level and tint to make the color
appear naturally for the user’s appearance.
First, select RGB (multiple color screen) or R/G/B(single
color screens) to check the color decoding effects while
adjusting. Then, you can adjust the level of color (red
and green), color intensity, and tint. Press
OK
to save
the setting. The settings refl ect in each of the 4 Color
Temperature modes.
Red**
Green**
Color*
Tint*
Information
The items indicated by “
*
” can be stored the setting for each of inputs and picture modes (Dynamic/Natural/Cinema).
You can enjoy different setting depending on the selected input such as VCR in AV1.
In addition, the items indicated by “
**
” can be stored the setting for each of color temperature modes.
32LD8800TA 37LD8800T
A
HITACHI
32
ENGLISH
MENU OPERATION (continued)
Picture Menu (RGB mode)
In this menu, you can make specifi c adjustments for the RGB picture based on your preference.
Selected Items Setup hint
Contrast
-31~+31
(+32~+40)
This adjusts the contrast to meet the lighting environment
by using ◄►.
The maximum value can be extended to [+40] by
pressing and holding ► button at [+31], which changes
the color between those numbers from green to
magenta. This is the special feature prepared for the
dark scene. At normal condition, it is recommended to
set the value less than [+31] .
Brightness -31~+31
With this function, black is adjusted to change the overall
brightness by using ◄►.
Color -31~+31
It can adjust color density based on your preference by
using ◄►.
Tint -15~+15
Pressing ◄ button enhances red and weakens green,
while pressing ► button weakens red and enhances
green. The setup hint is adjusting for the realistic skin
color.
Picture Enhancement
Off
You can select the preferred sharpness on detailed parts.
Low
Middle
High
Color Temperature
Cool
You can select from 4 settings (default) depending on the
lighting condition with ◄► buttons.
Normal
Warm
Black/White
Picture
Contrast : +31
Brightness : –31
Color : 0
Tint : +31
Picture Enhancement
: Off
Color Temperature : Normal
Color Temp. Adjust
Back Light : +20
Reset Reset
Select OK Set Return
32LD8800TA 37LD8800T
A
HITACHI
33
MENU OPERATION (continued)
Picture menu (RGB mode) (continued)
Selected Items Setup hint
Color Temp. Adjust.**
On
Amplitude
On: When you want to set specifi c adjustments in each of
the 4 Color Temperature modes. You can adjust on
the amplitude and cut off. The settings refl ect on the
Color Temperature.
Amplitude: subdue the following colors on the brighter
parts.
Cut off : subdue the following colors on the darker
parts.
Off: Remains as default setting.
Red
Green
Blue
Cut off
Red
Green
Blue
Off
Back Light -20~+20
Adjust the brightness of the Back Light for the maximum
visibility.
Reset
Each item on this menu screen can be restored to the original factory settings
by pressing
OK
button.
Information
There is a useful function to automatically store the setting on menu in almost every item so that you do not have to
reset every time. Furthermore, the following items can be stored more specifi cally.
In addition, the items indicated by “
**
” can be stored the setting for each of color temperature modes.
32LD8800TA 37LD8800T
A
HITACHI
34
ENGLISH
MENU OPERATION (continued)
Audio Menu
With this menu, you can adjust and customize the audio condition as you like.
You can move on to the next menu screen by pressing ▼button at the bottom.
Selected Items Setup hint
Audio Mode
Movie
You can select the most suitable sound condition from 4
alternatives according to the contents.
If you want to adjust each item value based on your
preference, select “Favorite”.
Music
Speech
Favorite
Treble** -15~+15 Adjust the Treble of the sound.
Bass** -15~+15 Adjust the Bass of the sound.
Balance -10~+10
Adjust the balance of the sound comes out from right and
left side of the speakers.
SRS
Off
This system gives you the dynamic 3D sound. Select it
depending on your preference.
Normal
Wide
TruBass
Off
TruBass gives you the enchanced bass sound.
Select it depending on your preference.
Low
High
BBE
Off
BBE High Defi nition Sound restores clarity and presence
for better speech intelligibility and musical realism.
Select it depending on your preference.
Low
High
Perfect Volume**
Off
It will automatically adjust the volume to its average level
each time you change the channel.
On
Internal Speaker
Off
This needs to be switched to Off when you want to take
audio from external epuipment.
It normally sets to On when you operate this monitor with
the equipped speaker.
On
Reset
Reset all the set values on this Menu Page to the original
factory settings.
Audio
Audio Mode
: Movie
Treble : +15
Bass : –15
Balance : 0
SRS
: Normal
TruBass : Low
BBE : Low
Perfect Volume : Off
Internal Speaker : On
Reset Reset
Select Set Return
LR
Audio
Head Phone Volume
: +20
Head Phone Select
: A/B
Select Adjust Return
32LD8800TA 37LD8800T
A
HITACHI
35
MENU OPERATION (continued)
Audio Menu (continued)
Selected Items Setup hint
Headphone Volume 0~63
It allows you to adjust the volume of the headphone. The
sound from the speaker will automatically set to MUTE
when the headphone is connected to the terminal.
Headphone Select
A/B
Select the either side of the display that you want to hear
the sound with headphone during 2-picture mode.
(See “Multi Picture Mode” on
41
)
A/B : You can select either side A (left side) or side
B (right side) which the sound comes into the
headphone. The speaker icon will be displayed on
the side you select.
B
B : You will hear the sound only from the side B (right
side) of the display.
NOTE
The headphone is NOT available when the image from the RGB or Photo Input is on the screen.
Information
There is a useful function to automatically store the setting on menu in almost every item so that you do not have to
reset every time. Furthermore, the following items can be stored more specifi cally.
The items indicated by “
**
” can be stored the setting for each of Audio Mode.
Timer Menu
This allows your monitor to turn Off (Standby mode) or On at set time automatically, which you may fi nd useful.
Selected Items Setup hint
Off Timer
--Min.
This function automatically sets the power to Standby
mode when the selected time period has elapsed.
30Min.
60Min.
90Min.
120Min.
On Timer --:--
This function automatically sets the power from standby
mode to On when the specifi ed time period has elapsed.
Input the desired time within the range of 00:00 to 11:59
by using ▲▼ button on the remote control.
Timer
Off Timer
: 30Min.
On Timer
: -- : --
Select Adjust Return
32LD8800TA 37LD8800T
A
HITACHI
36
ENGLISH
FUNCTION
Power Swivel
With the Desktop stand (included for 32LD8800TA, optional for 37LD8800TA), you can adjust the angle of the
monitor side to side by pressing
SWIVEL
button on the remote control.
1. Press
SWIVEL
button on the remote control.
The Swivel Display (as shown in the fi gure on the right) will appear on the
screen.
2. Adjust the angle of the monitor with ◄ ►keys while Swivel Display is on
the screen.
The monitor will be able to move ±30 degrees to each side.
NOTE
If the stand cable is not connected to the unit, the message “Not Available”
will appear on the screen.
The Swivel Display will automatically disappear when no operation has
been made for about 6 seconds.
The Swivel Display
Swivel
CAUTION
Do not push the panel with your hands while operating the Swivel. It could damage the panel and/or stand.
Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury.
Do not swing the monitor back and forth.
Do not place any fragile objects around the monitor. The monitor would hit the object(s) during the Swivel
operation and could cause the breakage of the objects and/or the stand.
To operate the Swivel function correctly, place the monitor on the stable surface.
When you use the unit as wall-mounting, disconnect the stand cable from the monitor before installation.
SWIVEL
button
Information
About Swivel terminal connection
CAUTION
When you install the Desktop stand, follow the Instructions of the Manual included with the stand.
Turn Off the Main Power of the monitor when connecting or disconnecting the stand cable to the unit.
To disconnect the stand from the unit.
Before detach the stand from the unit, make sure to
disconnect the stand cable
from the Swivel terminal on
the rear side of the unit.
POWER
SW
IVEL
CAUTION
When you use the Power Swivel function, make sure that the Power Cord, cord
or chain connected to the wall is loose enough to operate the Swivel function
securely.
Do not put hands or faces near the monitor while operating the Swivel. It could
cause personal injury. Beware especially when small children are around the
monitor.
To connect the Desktop stand to the unit
Connect the designated stand cable to the Swivel
terminal on the rear side of
the unit.
POWER SWIVEL
30°
30°
Slack
32LD8800TA 37LD8800T
A
HITACHI
37
FUNCTION (continued)
About Teletext
What is “Teletext”
Teletext is the written information services provided by each TV channel.
Most TV channels provide information via Teletext such as:
TV program schedule
Weather forecasts
Sports results
Newsfl ash
How to operate the Teletext
You can display the Teletext simply by pressing the remote control buttons.
Operation Press
To activate Teletext mode.
T
o exit from the Teletext mode.
[TV
Text]
To split the screen into two and watch both Teletext information
and actual broadcast at the same time.
Press again to watch Teletext on a single screen.
[Text
TV+Text]
To display Index page.
[Index]
To access Subtitle service directly (if the channel has the Subtitle
service broadcasting).
[Subtitle]
To display Hidden text.
ex. The answers of the Quiz or the Game page.
Press again to close the revealed answer.
?
[Reveal]
To return to actual broadcast temporarily while searching for the
Teletext page you request.
When the search is done, the designated page # will be displayed
on the upper left of the screen.
Press again to return to Teletext page.
X
[Cancel]
To access the link pages which are displayed at the bottom of the page.
(Select the buttons corresponding to the colors of the letters on screen.)
[Color]
To hold the text picture.
2-4-12
[Hold]
Information
Each time the
button is pressed, the screen will be switched from double screen to signal screen.
Some Teletext pages do not display Link Pages at the bottom of the screen. Press
button to display them.
11 : 37 : 56
Page Number
Link pages
Red Green Yellow Blue
NOTE
Select Teletext language from Setup Menu shown on
23
.
32LD8800TA 37LD8800T
A
HITACHI
38
ENGLISH
FUNCTION (continued)
Size Switching
Each time button of the remote control is pressed, the screen display size is
switched in sequence, and the status
will be displayed at the bottom of the screen.
TV/AV signal input
TV/AV1/AV2/AV3/AV4/AV5/HDMI1/HDMI2
4:3 Panoramic Zoom
CinemaFull
You can display the image at optimum condition by selecting display size depending on the current output image as
shown below.
Current Output
Image
(Input Signal)
Display Size To display suitable screen as follows.
(4:3 Signal)
4:3
Play a 4:3 image on screen faithfully. Blanking occurs on both sides.
Panoramic
Play a 4:3 image which enlarges horizontal and vertical size of the
middle in equal scales, and displays both sides appearing much wider.
(Vista)
Zoom
Play a 16:9 image in 4:3 image (Vista size) faithfully.
*In some case, slight blanking may remain at the top and bottom.
(Cinema)
Cinema
Play a 21:9 image in 4:3 image (Cinema size) expanding vertically.
*In some case, slight blanking may remain at the top and bottom.
(Squeeze)
Full
Play a 4:3 image faithfully in the standard vertical size and
horizontally squeezed.
Information
Aspect ratio represents horizontal : vertical ratio on screen.
For example, vista image is 16:9 in 4:3 image.
Position Adjustment
Vertical picture position can be adjusted for Panoramic, Zoom, and Cinema mode
as follows.
1. Press ▲▼buttons while operating the picture size display.
2. “Position” display will appear.
3. Adjust the position by ▲▼buttons.
Adjustment range of each picture size are as shown below.
Panoramic: -12 to+12 (The position cannot be adjusted in Panoramic 2 mode)
Zoom and Cinema: -31 to+ 31
*When 1080i/60 component signal is received, it can be adjusted only 0 to +1.
Vertical Size Adjustment at Panoramic Mode
While displaying a picture at Panoramic mode, the mode can be switched further between Panoramic 1 and Panoramic 2
with ◄ ►buttons on the remote control. By selecting Panoramic 2, the vertical size is scaled down so that you can
see the whole image without blanking.
9
16
3
4
16(or 21)
9
ZOOM button
Position + 31
Press
Position - 31
Press
32LD8800TA 37LD8800T
A
HITACHI
39
CAUTION
Using a wide-screen monitor
This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain
software, such as a TV program, the image would appear different form the original. Take this into consideration
when making screen mode choices.
Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for
commercial or public viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.
When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the
peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image
refl ecting original intention.
FUNCTION (continued)
Size Switching (continued)
RGB signal input
You can select suitable size depending on the resolution.
Normal Full Zoom1
Zoom3
Zoom2Real
*
Display Area Selection Diagram
Resolution Full display Circular display
Display Full Normal Real* Zoom1 Zoom2 Zoom3
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)
It has been performed processes such as compression (thinning) and enlargement for the above signal display. It
may affect fl icker to become noticeable on Zoom (1~3) depending on the display contents. To reduce this fl icker, turn
“Vertical Filter” On from “Setup Menu” (
26
).
* Real mode gives the image with same shapes as
that of computer monitor.
This mode is only available for VGA(640x480) to
WXGA(1280x768).
TV/AV signal input
32LD8800TA 37LD8800T
A
HITACHI
40
ENGLISH
FUNCTION (continued)
Multi Picture Mode
With this feature, you can watch different channels simultaneously on one screen in several ways.
As for the available signals, please refer to "Recommended Signal List" on
60
.
This function is NOT available in HDMI input.
To activate Multi Picture mode in either TV, AV, and RGB mode,
press
on the remote control.
2-picture mode
You can watch two different pictures side by side.
This mode is available in both TV mode and AV mode (AV1~5 Input).
Control on the side with Speaker Icon
Audio is output from the selected picture with the speaker icon.
You can switch the Input modes (TV and AV1~5) or change
channels only on the side with Speaker icon.
1. To shift the speaker icon, press ◄ ►button.
The speaker icon
will be shifted from A to B back-and-forth.
2. To change the channel on the selected picture, press
P
-
+
.
3. To select the Input mode on the selected picture, press Input Select buttons on
the remote control.
NOTE
In TV mode, you cannot select the same channels on both sides simultaneously.
You cannot select the same AV input on both sides simultaneously.
The message “Not Available” will be appeared on the screen when the
combinations of the Input modes are not acceptable.
(See the Table below for details.)
Table: Mix-and –Match of the Input Modes
Side B
Side A
TV AV1 AV2 AV3 AV4 AV5
TV *○○○○○
AV1 ○×○○○○
AV2 ○○×○○○
AV3 ○○○×○
AV4 ○○○○×○
AV5 ○○○○○×
*You cannot select the same TV channels on both sides simultaneously.
The selected picture with speaker icon
AV15
AB
32LD8800TA 37LD8800T
A
HITACHI
41
FUNCTION (continued)
Multi Picture Mode (continued)
2-picture mode (continued)
4. To switch to 4-picture mode, press
2-4-12
once.
The 4-picture mode is displayed on the screen.
NOTE
Each time
2-4-12
is pressed, the picture mode will be switched by following order.
2-Picture 2-Picture (1080i)* 4-Picture 12-Picture (TV mode only)
*
When receiving 1080i format of component signal, there is a mode (2-Picture(1080i))
which sub-screen is displayed inside of the large screen (Main-screen). Please
note that you cannot display the picture with component signal on Sub-screen.
5. To EXIT from the Multi Picture mode, press
button.
Next time you press
to activate the Multi Picture mode, it will start from 2-picture mode.
4-picture mode
You can watch 4 different pictures from live broadcasts and/or the external equipments at the same time.
NOTE
The audio comes out ONLY from side A.
You can change the channels or change Input modes on the side with ▼ (red triangle) mark.
1. To switch the ▼ location
Press ◄►buttons on the remote control.
The ▼ mark will shift to side A and side B back-and -forth.
2. To change the channel
Make sure that ▼mark is located on the side you want to make changes.
Side A: Press
P
-
+
to select channels.
Side B: Select the frame (B1~B3) that you want to make changes
with ▲▼buttons. The selected frame will be highlighted in green.
Press
P
-
+
buttons to select channels.
3. To change Input mode
Make sure that ▼mark is located on the side you want to make changes.
Side A: Press Input Select buttons on the remote control.
Side B: Select the frame (B1~B3) that you want to make changes
with ▲▼buttons. The selected frame will be highlighted in green.
Press Input Select buttons on the remote control.
B1 8
B2 6
B3 11
5
A
The selected picture with red triangle mark
AV2
AV1
(Sub-
screen)
[2-Picture (1080i) Mode]
32LD8800TA 37LD8800T
A
HITACHI
42
ENGLISH
FUNCTION (continued)
Multi Picture Mode (continued)
4-picture mode (continued)
NOTE
You cannot display the picture with Component signal on Side B screens.
4. To EXIT from Multi Picture mode, press
button.
Next time you press
to activate the Multi Picture mode, it will start from 4-picture mode.
5. To switch to 12-picture mode, press
2-4-12
button.
The 12-picture mode is displayed on the screen.
12-picture mode
You can check 12 different live broadcast channels on one screen.
The channels that are preset in advance (up to 200 channels) will
automatically appear in certain intervals.
NOTE
This mode is available only in TV mode.
1. To EXIT from the Multi Picture mode, press
.
Next time you press
to activate the Multi Picture Mode, it will start from 12-picture mode.
2. When you press
2-4-12
in this sequence, the 2-picture mode will be displayed.
1432
5876
9121110
32LD8800TA 37LD8800T
A
HITACHI
43
FUNCTION (continued)
Multi Picture Mode (continued)
Activate the Multi Picture Mode in RGB Mode
When you activate the Multi Picture mode in RGB Input, the picture will be displayed at the mode which the Sub-
screen is displayed inside of the large screen (Main-screen).
To activate Multi Picture mode, press
on the remote control.
The speaker icon
indicates the following.
The audio sounds can be heard on the side with the speaker icon.
When the speaker icon is on the Sub-screen
Change channels.
Switch the Input modes (TV and AV1~5) on the Sub-screen. (Main-screen is only for RGB Input.)
1. To shift the speaker icon
, press ◄►buttons.
The speaker icon
will be displayed in front of the Input mode indication.
2. To change the channel of the Sub-screen.
Make sure that
mark is located on the Sub-screen.
Press
P
-
+
to select channels.
3. To change the Input mode of the Sub-screen.
Make sure that the speaker icon is located next to the Input mode
indication of the Sub-screen (lower).
Press Input Select buttons on the remote control.
(AV1~5 are available)
4. To change the location of the Sub-screen.
Press ▲▼buttons. The Sub-screen will move up and down.
5. To exit from the Multi Picture mode, press
button.
NOTE
When operating Multi Picture mode, the “Power Save mode” is not available even though the Horizontal/Vertical
Sync. Signal (or any kind of Video signal) has not input for certain period of time.
AV1
RGB
(Sub-
screen)
Input mode indication
Main-screen (upper)
Sub screen (lower)
32LD8800TA 37LD8800T
A
HITACHI
44
ENGLISH
FUNCTION (continued)
Picture Freezing
This is the useful function utilizing the characteristics of freezing picture
effectively. By pressing
2-4-12
button, you can change to freeze mode easily
anytime you like. Press it again to return to normal picture.
There are two types of freeze mode as usage. These are possible to select at
the “Freeze Mode” from Function Menu.(
27
)
Split:
It displays 2 pictures from the same source. One is active (left), while the other
is still picture (right). This is very useful in order to avoid missing or take note
necessary information, such as ingredients in cooking.
Strobe:
It displays 12 pictures from the same source. 11 of them are still, while the last
picture is active. This can be used to check such movement as swinging of
golf club and baseball bat.
This function is also available in AV input mode besides TV mode. Refer to the
table as shown in “Recommended Signal List” on
60
.
AA
I
[Split]
[Strobe]
1
5
9
2
6
10
3
7
11
4
8
12
ACTIVE
FREEZE button
32LD8800TA 37LD8800T
A
HITACHI
45
FUNCTION (continued)
Photo Input Function
With this Photo Input function, you can enjoy watching Photos from such devices as
Digital Still Camera and SD card on monitor along with useful features such as Slide
Show with Background Music and Movie picture.
Operating the Photo Input
1. Before operating this function, make sure to turn the power OFF /Standby.
2.
Prepare the DSC (Digital Still Camera) / USB card reader/ SD card or MMC as follows.
Digital Still Camera : Set up with reference to the content about
“connecting to PC” in the user manual of DSC.
USB Card Reader : Insert only one memory card.
SD Card / MMC : Ensure the card is inserted in the correct direction as
indicated near the slot.
3. Connect the USB cable to the input terminal as shown (Right side), or insert the
SD card /MMC into the slot (Left side).
4.
Turn ON the TV after the USB cable is connected or the SD card / MMC is inserted.
5. Press button on the remote control to activate Photo Input mode.
(Then, turn ON the DSC. Refer to the user manual of your DSC for the timing.)
6. Each time
button is pressed, you can switch the mode as follows.
Photo Movie Normal Screen
Rear Panel (Left side and Right side)
NOTE
Do not insert SD Card/MMC and USB cable at the same time.
Do not insert anything other than SD Card/MMC into the slot. It could cause malfuction or damage to the slot.
OK
P
P
SD MEMORY
CARD
PUSH-EJECT
PH35814
SD Card/MMC
Left Side
Digital Camera
USB Card Reader
USB cable
INPUT(AV5)
R
L/MONO
AUDIO
VIDEO S-VIDEO
PH35826
Right Side
32LD8800TA 37LD8800T
A
HITACHI
46
ENGLISH
Do not allow children to play around the slot.
FUNCTION (continued)
Photo Input Function (continued)
Displaying Still Picture in Photo Mode
Thumbnail-Size Image (Index) to Full-Size Image
When you enter the Photo Index mode, the icon appears as the indication.
You can also select the preferred fi le in both Thumbnail-size and Full-size image by inputting the fi le directly with
numeric buttons of remote control.
Rotation Function
Each time
?
-ROTATE-
button is pressed, the picture is rotated in the sequence of the following.
4
8
12
16
3
7
11
15
2
6
10
14
1
5
9
13
20
24
28
32
19
23
27
31
18
22
26
30
17
21
25
29
20
24
28
32
19
23
27
31
18
22
26
30
17
21
25
29
No. 23
28/05/03
1600x1200
No. 24
28/05/03
1600x1200
Photo Index (1
st
Page). Photo Index (2
nd
Page)
Move to next page.
Photo Index (2
nd
Page)
Select the file.
Full size
File#23 is displayed.
Full size
File#24 is displayed.
OK
OK
P
P
A
A
No. 23
28/05/03
1600x1200
Photo Index (2
nd
Page). Rotating a thumbnail
image to 90°.
Rotating a full size
image to 90°.
Full size
File#23 is displayed.
OK
A
A
?
-ROTATE-
?
-ROTATE-
90° 180° 270°
32LD8800TA 37LD8800T
A
HITACHI
47
FUNCTION (continued)
Photo Input Function (continued)
Displaying Still Picture in Photo Mode (continued)
Slide Show Function
*
You can select where to start Slide Show. See “Slide Mode
in
the table 1.
*You can also start the slide show when displaying the selected full
size image, press SLIDE SHOW button by pressing
SLIDE SHOW
button.
If the pause is left for more than a minute, the slide show restarts automatically.
If you stop the slide show halfway, the photo index page selects the fi le in which you stopped.
You can make specifi c adjustment on “Slide Effect / Slide Interval / Slide Music / Slide Mode” from “Function
Menu (2
nd
page)”. While operating Photo Input function, you can jump to there by pressing
MENU
button. Press it
again to return to the Photo Input page. (Refer to Table 1 as below.)
NOTE
Contrast will decrease automatically to reduce power consumption if stationary images such as
still photos are left on the screen for more than 3 minutes. Please note that it is not malfunction.
Table 1. Slide Show Adjustment
Function Menu Selection Description
Slide Effect Off→1→2
Select Slide Switching Method.
Off: No effect
1: Fade In/Out effect
2: Wipe effect
Slide Interval 5Sec.→10Sec.→30Sec. Select preferred interval times.
Slide Music Off→1→2
Select the Background Music.
Off: No sound.
1: Slow tempo music.
2: Up tempo music.
Slide Mode 1→2
Select starting point of slide show.
1: Start from the selected fi le.
2: Start from 1
st
le.
Photo Index (2
nd
Page)
Select the file.
No. 23
28/05/03
1600x1200
Slide Show begins.* Slide Show is paused.
OK
20
24
28
OK Start
32
19
23
27
31
18
22
26
30
17
21
25
29
SLIDE SHOW
32LD8800TA 37LD8800T
A
HITACHI
48
ENGLISH
FUNCTION (continued)
Photo Input Function (continued)
Displaying Movie Picture in Movie Mode
Thumbnail-Size Image (Index) to Full-Size Image:
*1: Press ▲▼ or
button to display the operation OSD.
*2: Press
button in remote control or
button (OSD) to exit from the OSD display.
*3: For the Previous button on remote control or OSD, pressing it once starts over the current movie. By
pressing it again within 2 seconds after that, you can return to the previous movie.
*4: When it moves on the unsupported fi le, it automatically returns to the Index.
*5:
You can also select the Thumbnail-Size image by inputting fi le # with numeric buttons of remote control.
[Operating the Movie]
You can use the following control key to operate the movie.
The movie OSD contains the fi le information and control keys as below.
The following indications might appear in Movie Operation OSD.
: The movie does not have sound, or this function does not support only the sound of movie.
: This function does not support the movie.
With
button on the remote control, you can switch the size of movie display between normal and double in full size mode.
NOTE
In case of displaying movie pictures,
1) If your DSC supports SD card/MMC, insert the card to the monitor directly rather than USB.
2) If your DSC is PictBridge-compatible and has a function to switch between PTP and Mass Storage connection,
change your setting to Mass Storage and then connect to Photo Input terminal so that it can be available on
both Still and Movie pictures. PTP connection can display still pictures but not movie pictures.
3)
If your DSC does not support SD card / MMC or Mass Storage connection, use USB card reader to connect
with Photo Input terminal. Please note that we do not guarantee all DSC can make either or both Mass Storage
and USB card reader connection.
Comparing to movie pictures through SD card/MMC, the movie pictures using USB might have lower
performance such as dropping frames.
4
8
12
16
3
7
11
15
2
6
10
14
1
5
9
13
20
24
28
32
19
23
27
31
18
22
26
30
17
21
25
29
20
24
28
32
19
23
27
31
18
22
26
30
17
21
25
29
Photo Index (1
st
Page). Movie Index (2
nd
Page). Movie Index (2
nd
Page)
Select the file.
Movie starts.
or
or*1
or *2
or
Operate the Movie
with remote control
keys or Movie OSD.
OK
After completing the
current movie, the
next Movie starts
automatically.
4
8
12
16
3
7
11
15
2
6
10
14
1
5
9
13
Movie Index (1
st
Page).
20
24
28
32
19
23
27
31
18
22
26
30
17
21
25
29
or *3
After completing all
of the movie files, it
automatically returns
to the Index.
*4
or*5
2
2
AV4
Play
OSD
Remote
Control
Stop
Fast-
forward
Rewind Pause Next Previous Zoom
Slow
Play
Exit
HDMI1
RGB
HDMI2
AV3
*
3
32LD8800TA 37LD8800T
A
HITACHI
49
FUNCTION (continued)
Photo Input Function (continued)
Other
You can select the background pattern on “Background” from “Function Menu.”
Function Menu Selection Description
Background 1→2
Select preferred background pattern.
1: Striped texture of gray
2: Green checked pattern
Press
button whenever you want to return from full size image to index.
The fi le information is displayed by pressing
button.
Thumbnail-Size Image Full-Size Image (Still) Full-Size Image (Movie)*
To exit from Photo Input…
You can exit from Photo Input when…
Pressing
button in Photo Index mode, or
Pressing
button in Movie mode (Index and full).
OSD Information
Operation Message
Accessing “Loading...” *
Loading Files “Loading...” *
Normal no message
Not insert USB/SD/MMC “! No Connection”
Not available format “! No Connection”
Abnormal “! No Connection”
No File “! No File”
*The message “Loading...” starts to blink automatically if it is displayed on the screen more than 5 seconds.
Specifi cation
Application
q
Digital Still Camera corresponding to DCF standard.
w
USB Card Reader with the memory containing pictures had taken by
q
camera.
e
SD card/MMC card containing picture had taken by
q
camera.
Photo
Max number of photo fi le 500
Max number of pixel 8176 x 8176(DCF JPEG format)
Movie
Max number of movie fi le 500
Supported Video Format
(Extension/Max number of pixel)
Motion JPEG (avi.mov/640*480)
MPEG1 (mpg/640*480)
MPEG4 (avi,mov,mp4,asf/352*288)
Supported Audio Format
PCM (Incompressible format)
ADPCM
G.726
μ-LAW PCM
MPEG1-LayerII
* The size of the image depends
on the resolution for the image.
32LD8800TA 37LD8800T
A
HITACHI
50
ENGLISH
FUNCTION (continued)
Photo Input Function (continued)
CAUTION
The picture may not be displayed on this monitor in case of copying, viewing or editing by computers, etc.
Do not connect any apparatus other than DSC, USB card reader, and SD card/MMC to the Photo Input
connector. It causes the malfunction.
Do not connect a DSC and USB card reader with USB HUB. Pictures may not be displayed correctly, or it causes
the malfunction.
Insert only one memory even though the USB card reader has multiple slots for memory card. Pictures in
multiple memories cannot be seen at the same time.
Certain types of DSC, card readers, or SD card/MMC may not work with this Photo Input function.
DSC with low battery power may not properly display photos in this function.
Response time might vary depending on each image contents when switching pages, loading fi les, and playing
each movie.
Contrast will decrease automatically if stationary images such as still photos are left on the screen for more than
3 minutes.
The OSD message “! No Connection” is displayed in case of the incomplete connection with USB cable or SD
card / MMC and connection to a digital still camera or USB card reader without the memory card.
The menu items other than “Picture,” “Function,” and “Audio” are not available with grayed-out display.
The functions of the multi picture, CH selection, freeze mode, aspect, mode display, and so on are not available.
During blinking LED which indicates the access of DSC / USB card reader /SD card/ MMC, or displaying
“Loading...”, do not turn the power off/standby mode nor remove/insert USB cable and memory card.
The picture may not be displayed correctly, depending on the connecting device in case of extending the USB
cable.
PictBridge-compatible DSC can be connected to Photo Input terminal through PTP transfer, which supports still
pictures but not movie pictures. Refer to the DSC user manual for PictBridge in details.
Do not use this function other than private purposes. It might infringe copyright laws.
Back up all of the data in the memory card in case if data was lost due to unexpected accident. We do not
assume any liability for the losses by misuse or malfunction.
32LD8800TA 37LD8800T
A
HITACHI
51
FUNCTION (continued)
Audio Switching
NICAM / Sound Multiplex(including A2) (TV mode)
You can make optimum use of available audio by pressing
bottom of remote control. Audio can be switched only
if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when
only mono sound is received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is
available on the primary and secondary sounds; for example, some sports programs contain broadcast commentary
on a game as primary sound, and a commentary about a team as the secondary.
When bilingual program is received, sound mode display appears in yellow as shown. Also, when receiving NICAM
signals, NICAM display will appear.
Each time
button is pressed, the display is switched in the sequence of following.
Sound multiplex signal received
[ ]
Yellow
NICAM signal received
[ ]
Yellow Green
Yellow Green
NICAM[ ] NICAM[ ]
Yellow
[
I
]…Main language/Primary Sound
[
II
]...Sub language/Secondary Sound
▼…force mono: This selects main language or primary sound.
Stereo broadcast
With stereo broadcast, you can enjoy different sound from either side.
When a stereo program is received, sound mode display will appear in red as shown.
Also, when receiving NICAM signals, NICAM display will appear.
Press
button to switch between stereo and mono sound.
Sound multiplex signal received
NICAM signal received
Red Green
Red Green
NICAM
...Stereo
.....Force Mono
NOTE
Please select ▼(force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that
you can receive a clear mono sound.
represents the Mono broadcast.
32LD8800TA 37LD8800T
A
HITACHI
52
ENGLISH
FUNCTION (continued)
Power Save Mode
When AV input is selected
You are provided the function to save power consumption when no signal is detected in AV input. Set to On in “Video
Power Save” from Function Menu, which leads to the power save mode in AV1 /AV2 /HDMI1 /HDMI2 and the
Standby mode in other AV input. (Please see the table below for details)
Refer to
27
about “Video Power Save”
.
When no signal is detected
When signal is input during
On in “Video Power Save”
Condition Indicating Lamp
AV1, AV2,
HDMI1, HDMI2
Power Save Orange Turns On automatically.
AV3~AV5 Standby Red Remains as Standby mode.
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set
to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync signal
Horizontal Yes No Yes No
Vertical Yes Yes No No
PC signal Active (normal display) Blank (no display)
Operation mode On Off
Indicating lamp Lights green Lights orange
Returning to operating status
Operate the personal computer, or press either the INPUT SELECT button of the control panel or the RGB button
of the remote control.
32LD8800TA 37LD8800T
A
HITACHI
53
FUNCTION (continued)
DVD Player / STB Selection
You can use this remote control to operate DVD Player and Set Top Box of other
makers as well as this set. After pressing
button, press (or hold) the required
buttons to select the maker and type as shown below.
Set up hint
Example: HITACHI DVD
w
1. Set up the maker.
Press
button to indicate the DVD LED on the remote control. While the DVD
LED is blinking (Approx. 30 Seconds), press
+
and
q
buttons.
2. Set up the maker type.
Release the
q
button while keeping
+
button depressed. Then press
w
button.
3. Confi rm the setting.
After setting the maker and type, press the SUB POWER button on the remote
control. If the DVD does not switch ON, repeat step 1 and 2 using other maker
types as listed.
<“DVD” Selection>
Makers of DVD Player
Set Maker Set type
Makers of DVD Player
Set Maker Set type
HITACHI
+
qq
~
e
RCA
+
p
+
q
FUNAI
+
wq
Mitsubishi
+
+
q
Pioneer
+
eq
~
y
ONKYO
+
RED
+
q
~
e
Panasonic
+
rq
~
r
ZENITH
+
GREEN
+
q
TOSHIBA
+
tq
~
r
THOMSON
+
YELLOW
+
q
Philips
+
yq
~
w
SHINCO
+
BLUE
+
q
JVC
+
uq
SKYWORTH
+
+
q
SAMSUNG
+
iq
BUBUKO
+
+
q
Sony
+
oq
~
r
DENON
+
+
q
~
w
Sharp
+
2-4-12
q
~
w
YAMAHA
+
?
+
q
~
w
<“SAT” Selection>
Makers of STB Player
Set Maker Set type
HITACHI
+
q
+
q
~
w
TOSHIBA
+
w
+
q
DGTEC
+
e
+
q
Panasonic
+
r
+
q
NOTE
Please note that not all models of the listed makers can be operated using this remote control.
32LD8800TA 37LD8800T
A
HITACHI
54
ENGLISH
TROUBLESHOOTING
Before calling service technician, check the following tables fi rst. If the problem is not be solved with the suggested procedures, contact your local
dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on the Screen
Message Condition / Action Page
Power Save
This indicates it is in Power Save mode. (in AV/RGB mode)
The indicating lamp lights in orange.
27
,
52
No Sync. Signal
The unit cannot detect any signals from any input terminals.
Check if the cable is connected correctly and fi rmly.
Check if the power of the external equipments is ON.
Check if the input selection matches the connection terminal.
Check if the PC is in Power Save mode or not.
14
~
16
Invalid Scan Freq.
The unit receives signals not supported by the monitor.
Check if the cable is connected correctly and fi rmly.
Check if the input signal is compatible with the specifi cation of the monitor.
57
,
59
Not Available This shows when the selected operation is not available.
Check Antenna Check the connection status when this message appears.
13
Auto Adjusting
This indicates that it is in the process of auto adjusting.
(in RGB mode)
25
Symptom and Check List
Symptoms Check list Page
No picture - no sound
Check the Indicating lamp status (Off, Red, Green, or Orange).
Check the connection of the Power Cord and/or other cables.
Check if the Main Power of the unit or external equipments is ON.
Check if the TV mode is selected.
Check if the TV is in “Standby mode” or “Power Save mode”.
Adjust the values in “Picture menu” and “Audio menu”.
13
~
16
18
,
23
,
52
Snowy picture-poor sound
Check the antenna connection and direction.
The TV station may have broadcast diffi culties.
Try another channel.
13
Multiple images-normal sound
Check the antenna connection and direction.
Fine tuning the TV.
Check the connection of the external equipments.
The TV station may have broadcast diffi culties.Try another channel.
13
,
22
Intermittent interference
Check if the source of interference is shielded well.
Remove those kinds of electrical devices away from the TV.
Normal picture, but no sound
Check the volume level.
Check if the
button has been pressed or not.
Make sure that the headphone is NOT connected.
Check the connection of the external equipments.
19
No picture - normal sound
Check the value level of “Brightness” and “Contrast” in
“Picture Menu”.
29
,
32
The remote control does not work.
Check if the batteries are installed correctly.
The batteries might be exhausted. Replace them with new ones.
Remove all the obstructions in front of the sensor window on the unit.
Check if you select the correct function by
button on the
remote control
.
Check if the buttons of the control panel can work.
10
,
11
Normal picture but no color-normal sound
Check the connection of the external equipments.
Check the “Color System” in “Setup Menu”.
14
~
16
32LD8800TA 37LD8800T
A
HITACHI
55
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list Page
No picture
The Indicating lamp → Off
Check if the Power Cord is plugged into the socket fi rmly.
Check if the Main Power is ON.
17
,
18
No picture
The Indicating lamp → Orange
It means that the unit is in “Power Save
mode”.
Check if all the cables of the external equipments are connected
correctly and fi rmly.
Check if the power of the external equipments is ON.
Check if the TV/AV mode has been selected correctly.
Check if the PC is in Power Save mode or not.
Refer to “Power Save mode” and “When following messages appears on
the screen”.
52
No picture
The indicating lamp → Green
Check if the signal cable is connected correctly and fi rmly.
Adjust the level of Brightness and Contrast lower.
14
~
16
The top of the monitor and surface of
the panel heat up.
It may happen when you use the unit for long hours. Turn off the Main
Power of the unit for a while. Please note that this is not malfunction.
57
,
59
Image cannot be displayed in the correct
position.
Press
button to check if the input signal of the displayed image is
compatible with the specifi cation of the monitor.
25
,
57
,
59
When the VCR is in special playback
features (Fast Forward or Rewind), the
screen gets dark and cannot see the
image at all.
It could happen when the VCR is connected to Component output, such
as 480i. This is not malfunction.
Try Composite output or S-video output and check the picture again.
The images are not displayed on sub
pictures in “Multi Picture mode”
There are some combinations of input signals that the images are not
displayed on sub pictures.
Please check the Table of “2-Picture” and “4-picture/2-picture (1080i)” for
details.
41
~
43
60
Screen display size cannot be switched
correctly.
The display size is fi xed at “FULL” when the receiving signals are
1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz.
Check the signal status by pressing the
button on the remote
control.
38
,
39
Cannot be displayed the image from
HDMI 1 or 2.
Check if the cables are connected correctly.
Check the output format of the equipments.
(Please refer to “Connecting Procedure” and “Recommended Signal
List”.)
57
~
59
32LD8800TA 37LD8800T
A
HITACHI
56
ENGLISH
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list
Page
Cannot display the image from “Photo
Input function”.
Check the connecting equipments and image format.
(Please refer to “Photo Input function”.)
45
,
49
,
50
The image on the screen is moving in
an oblique direction.
(PC input mode only)
Adjust “Horizontal Clock” and “Clock Phase”.
25
The coarse horizontal stripes could be
seen in full-display mode.
(PC input mode only)
Adjust “Horizontal clock”.
25
The part of the image is lacking.
(PC input mode only)
AAAAA
Try “Auto Adjust”.
25
The horizontal stripes are moving
vertically with fl ickering screen.
(PC input mode only)
Check the Signal status of the PC by pressing
button
on the remote control.
If the Vertical Frequency of the PC is set to less than 85Hz,
adjust its level higher (up to 85Hz).
Set “Vertical Filter” to ON.
(Please note that you will have lower vertical resolution with
this action.)
26
When the characters are displayed
on the whole screen, the vertical
stripes appear and some of the
characters are blurred.
(PC input mode only)
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
Try “Auto Adjust”.
If the display condition is not improved with Auto Adjust,
adjust “Horizontal Clock”.
25
When the letter string is displayed in
full-screen, all of the characters on
the screen are blurred.
(PC input mode only)
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
Try “Auto Adjust”.
If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you get clearest image.
25
When the small patterns are
displayed on the screen, the entire
screen is fl ickering.
(PC input mode only)
Try “Auto Adjust”.
If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you get fl icker-free display.
25
The thickness of the letters, lines, etc
is not displayed evenly.
(PC input mode only)
It could happen when the image with more than 768 lines
of vertical resolution is displayed.
Please note this is not malfunction.
59
32LD8800TA 37LD8800T
A
HITACHI
57
PRODUCT SPECIFICATIONS
SPECIFICATION
Panel
Display dimensions
Approx. 32 inches
(698 (H) x 392 (V) mm, diagonal 801mm)
Approx. 37 inches
(820 (H) x 461 (V) mm, diagonal 941mm)
Resolution 1366 (H) x 768 (V) pixels 1366 (H) x 768 (V) pixels
Net dimensions
including Stand:
813(W)x663(H)x350(D) mm
excluding Stand:
813(W)x584(H)x114(D) mm
including Optional Stand:
940(W)x736(H)x350(D) mm
excluding Optional Stand:
940(W)x657(H)x119(D) mm
Net weight
including Stand: 27.6kg
excluding Stand: 21.9kg
including Optional Stand: 32.9kg
excluding Optional Stand: 27.2kg
Ambient
conditions
Temperature Operating : 5°C to 35°C, Storage : 0°C to 40°C
Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply
AC100 - 240V, 50/60Hz
Power consumption/ at standby
150W/<1W (100-220V)
150W/<1.1W (230-240V)
178W/<1W (100-220V)
178W/<1.1W (230-240V)
Audio output speaker total 20W speaker total 20W
(VIDEO input)
Input terminals
AV1•2: composite video input terminal (RCA)
component video input terminal (RCA)
L/R audio input terminal (RCA)
AV3•5: composite video input terminal (RCA)
S video input terminal.
L/R audio input terminal (RCA)
AV4 : composite video input terminal (RCA)
L/R audio input terminal (RCA)
HDMI 1•2 : HDMI input terminal
Audio input terminal (3.5mm Stereo Mini Jack)
Photo Input : Photo Input terminal / SD card slot
Input signals
Composite video: PAL, SECAM, NTSC3.58, NTSC4.43, PAL60
Component video: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60
Output Signal
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin)
OUTPUT (SUB-WOOFER): Woofer output terminal
(RF input)
Input terminal / Receiving range ANT : 75Ω Unbalanced / 44~870MHz
RF Video System
PAL B, G, H / I / D, K
SECAM B, G / D, K / K1
NTSC-M
(RGB input)
Input terminals
Analog RGB input terminal (D-sub 15-pin)
Audio input terminal (3.5mm Stereo Mini Jack)
Input signals 0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
Sync signals
H/V separate, TTL level [2KΩ]
H/V composite, TTL level [2KΩ]
Sync on green, 0.3 Vp-p [75Ω]
The monitor takes at least 30 minutes to attain the status of optimal picture quality.
32LD8800TA 37LD8800T
A
HITACHI
58
ENGLISH
PRODUCT SPECIFICATIONS (continued)
Signal Input
RGB terminal (D-sub 15-pin connector)
Pin Input signal
1R
2 G or sync on green
3B
4 No connection
5 No connection
6 R.GND
7 G.GND
8 B.GND
9 No connection
10 GND
11 No connection
12 [SDA]
13 H. sync or H/V composite sync
14 V.sync. [V.CLK]
15 [SCL]
S-input connector pin specifi cations
Pin Input signal
1Y
2 Y-GND
3C
4 C-GND
Frame GND
Photo-input connector pin specifi cations
Pin Input signal
15V
2DM
3DP
4 GND
HDMI connector pin specifi cations
Pin Input signal Pin Input signal
1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock-
3 TMDS Data2- 13 CEC
4 TMDS Data 1+ 14 Reserved(N.C. on device)
5 TMDS Data1 Shield 15 SCL
6 TMDS Data1- 16 SDA
7 TMDS Data0+ 17 DDC/CED Ground
8 TMDS Data0 Shield 18 +5V Power
9 TMDS Data0- 19 Hot Plug Detect
10 TMDS Clock+
When different kinds of input signals are
simultaneously input to the monitor via a graphics
board or the like, the monitor will automatically select
the signals in the following priority order:
Sync signal type Priority
H/V separate sync. 1
H/V composite sync. 2
sync.on Green * 3
* Even in the case of the recommended signals shown
on the following page, there may be instances when
correct display is not possible. In this case, use H/V
separate sync, H/V composite sync.
32LD8800TA 37LD8800T
A
HITACHI
59
PRODUCT SPECIFICATIONS (continued)
Recommended Signal List
With HDMI input
No.
Signal mode
Horizontal
frequency
(kHz)
Dot clock
frequency
(MHz)
Remarks
Signal
Name
Resolution
Vertical
frequency (Hz)
1 VGA 640 X 480 59.94 31.47 25.18 EIA-861B
2 576i
720(1440) X 576
50.00 15.63 27.00 EIA-861B
3 480i
720(1440) X 480
59.94 15.73 27.00 EIA-861B
4 576p 720 X 576 50.00 31.25 27.00 EIA-861B
5 480p 720 X 480 59.94 31.47 27.00 EIA-861B
6 1080i/50 1920 X 1080 50.00 28.13 74.25 EIA-861B
7 1080i/60 1920 X 1080 60.00 33.75 74.25 EIA-861B
8 720p/50 1280 X 720 50.00 37.50 74.25 EIA-861B
9 720p/60 1280 X 720 60.00 45.00 74.25 EIA-861B
With RGB input
No.
Signal mode
Horizontal
frequency
(kHz)
Dot clock
frequency
(MHz)
Remarks
Signal
Name
Resolution
Vertical
frequency (Hz)
1
VGA
640 X 400 70.08 31.47 25.18
2 640 X 480 59.94 31.47 25.18
3 W-VGA 864 X 480 59.94 31.47 34.24 WVGA type : On
4
VESA
640 X 480 72.81 37.86 31.50
5 640 X 480 75.00 37.50 31.50
6 640 X 480 85.01 43.27 36.00
7 800 X 600 56.25 35.16 36.00
8 800 X 600 60.32 37.88 40.00
9 800 X 600 72.19 48.08 50.00
10 800 X 600 75.00 46.88 49.50
11 800 X 600 85.06 53.67 56.25
12 1024 X 768 60.00 48.36 65.00
13 1024 X 768 70.07 56.48 75.00
14 1024 X 768 75.03 60.02 78.75
15 1024 X 768 85.00 68.68 94.50
16 1152 X 864 75.00 67.50 108.00
17 1280 X 1024 60.02 63.98 108.00
18 1280 X 1024 75.03 79.98 135.00
19 1280 X 1024 85.02 91.15 157.50
20 1600 X 1200 60.00 75.00 162.00
21 1600 X 1200 75.00 93.75 202.50
22 1600 X 1200 85.00 106.25 229.50
23
Macintosh
640 X 480 66.67 35.00 30.24
24 832 X 624 74.55 49.72 57.28
25 1024 X 768 74.93 60.24 80.00
26 1152 X 870 75.06 68.68 100.00
27
W-XGA
1280 X 768 59.833 47.986 81.00
28 1280 X 768 69.997 56.137 94.760
29
W-XGA
1280 X 768 59.876 47.776 79.50
WXGA Mode : 1280x768
30 1366 X 768 60.015 47.712 85.50
WXGA Mode : 1366x768
The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position, Vertical Position,
Horizontal Clock and Clock Phase.
The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it.
The monitor differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync
signal polarities. Note that different signals having all these elements alike may be handled as the same signal.
Displaying images with more than 768 lines of vertical resolution at Full diplay (compressed display) can result in the interpolation of
stripes.
32LD8800TA 37LD8800T
A
HITACHI
60
ENGLISH
PRODUCT SPECIFICATION (continued)
Recommended Signal List (continued)
With Multi Picture Function
2-Picture
Input terminal AV1~AV5 AV1, AV2
TELE
TEXT
Sub
Main
TV
PAL
SECAM
NTSC3.58
NTSC4.43
576i
576p
480i
480p
720p/50
720p/60
1080i/50
1080i/60
TV
○○
AV1
~AV5
PAL, SECAM
○○
NTSC3.58/4.43
○○
AV1
AV2
576i, 576p
○○
480i, 480p
○○
720p/50, 60
○○
1080i/50, 60
○○
(○ : Available)
4-Picture / 2-Picture (1080i)*
Input terminal AV1~AV5 AV1, AV2
TELE
TEXT
Sub
Main
TV
PAL
SECAM
NTSC3.58
NTSC4.43
576i
576p
480i
480p
720p/50
720p/60
1080i/50
1080i/60
TV
○○
AV1
~AV5
PAL, SECAM
○○
NTSC3.58/4.43
○○
AV1
AV2
576i, 576p
○○
480i, 480p
○○
1080i/50, 60*
○○
720p/50, 60
○○
(○ : Available)
With Picture Freezing Function
Split Strobe
TV
○○
PAL, SECAM
○○
NTSC3.58/4.43
○○
576i
○○
480i
○○
576p
480p
720p/50, 60
1080i/50, 60
HDMI
RGB
(○ : Available)
32LD8800TA 37LD8800T
A
HITACHI
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi 37LD8800TA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi 37LD8800TA in de taal/talen: Engels als bijlage per email.

De handleiding is 3,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info