741082
7
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
7
EN
a) About the bowl guard
Note: When bowl guard (5) is open or not properly closed in lock position, the machine will not operate.
1. To open the bowl guard (5), hold the bowl guard
handle (11) and rotate it clockwise. To close the
bowl guard (5), hold the bowl guard handle (11)
and rotate it anti-clockwise.
2. When the bowl guard handle (11) is lined up at
the right side of the machine, the bowl guard (5)
is in the is in the rocked position and ready for
operation.
b) Install the bowl (2) to the machine
Note: Install the bowl (2) BEFORE fixing the attach-
ments. Use the supplied bowl (2) only.
1. Lower the bowl by pulling the bowl lift-up lever
(9) downwards until it stops. So that the bowl
cradle (12) is in a lower position.
2. Place the bowl (2) carefully and slowly using the
bowl handles (4) at 2 sides and
i) With the locking pin into the hole at the
middle of the bowl cradle (12) and
ii) Secure the bowl (2) by pull each
bowl clamp (3) forward until the
bowl (2) is locked tight.
c) Install different attachments (Flat beater, Dough hook or Whisk) to the machine
Note: It is more convenient and easier to install the
attachments prior to adding the ingredients
into the bowl (2).
1. Rotate the bowl guard (5) clockwise gently with
the bowl guard handle (6), so that it is in the open
position.
2. CAUTION! Use excessive force to open or close
the bowl guard (5) may damage the safety lock
micro switch. Be careful when open or close the
bowl guard (5).
3. Slide the attachments (Flat beater, Dough hook
or Whisk) slowly upwards onto the planetary
shaft fitting the shaft pin through the slot in the
attachments.
4. Rotate the attachments to secure it onto the
planetary shaft.
d) Pouring and mixing ingredients
Note: Follow the “Mixing ingredients capacity” ta-
ble in this manual. Overloading will lead to
overflow or damage to the machine.
IMPORTANT: Make sure the speed control lever (6)
is set at the “dough hook” position.
1.
Add all the appropriate ingredients into the bowl (2).
2. Lift upwards the bowl lift lever (9) until the bowl
(2) locks into the position.
3. Rotate the bowl guard (5) anti-clockwise and
locks into the position.
Attention: The machine will not start if the bowl
guard (5) is open / not closed properly or the bowl
(2) is at the lower position.
e) Set the speed, attachment & start up the machine
1. Select the appropriate speed by lifting or low-
ering the speed control lever (6). Three fixed
speeds are available for different attachments:
Rotation speed Type of ingredient
Dough hook (Low)
Heavy: Mixing pizza, bread,
pasta and
Flat beater (Medium)
Medium: 2nd stage of mixing
for donut dough, etc.
Whisk (High) Light: Whipping cream, egg
whites, meringue.
IMPORTANT: ALWAYS follow the recommended
attachment used and speed setting according to
the capacity table and indication next to the speed
control lever (6).
ATTENTION: Be careful about the risk of dust and
flour escape when slitting of bags of ingredient into
bowl (2). Wear protective mask or glasses if nec-
essary.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 222973 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 222973 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 2,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info