607695
19
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
36
37
6.1 ATM VC: (DSL modem setting)
Asynchronous Transfer
Mode (ATM) is a method of
transferring data whereby
the data traf c is transferred
in small packets, and the
transfer is coded and
asynchronous. You must enter
the following values, which
differ according to the DSL connection.
Virtual Circuit: PVCO is selected by default.
Status: Activated must be selected.
VPI: 1
VCI: 32
Note: The values 1 and 32 are only valid for the Deutsche Telekom DSL connection. If your connection is through a
different company or you are not resident in Germany, ask your DSL connection provider for these values.
Click SAVE at the bottom of the window to save your settings.
6.2 Encapsulation: (DSL protocol)
The purpose of encapsulation
is to encapsulate other
protocols and to transport
these in the form of IP
tunnels.
In Germany, the PPPoE
protocol is used almost exclusively; this manual will therefore cover this protocol only. Users with different
protocols should consult their internet service provider, which will provide the relevant setting information.
Click SAVE at the bottom of the window to save your settings.
6.3 PPPoE/PPPoA: (Broadband connection protocol)
PPP over Ethernet (PPPoE)
is the use of the Point-to-
Point Protocol (PPP) with an
Ethernet connection. PPPoE
is currently used for ADSL
connections in Germany.
5 Interface Setup
In this screen, you can change the standard
LANsettings of the router.
In the Main Menu, select the Interface
Setup menu item, followed by the LAN
sub-item.
5.1 Router local IP:
The IP Address of the router is set to 192.168.2.1 by default. If you want to use a different address for the router, you
can make the necessary changes here. The corresponding IP Subnet Mask is entered in the eld directly below
this. All other elds are only relevant for specialised application areas, which cannot be explained in depth here.
We recommend that you keep the default settings.
Click SAVE at the bottom of the window to save your settings.
Warning: The new LAN configuration takes effect after restarting. You must therefore use the new IP address to
open the web interface in the browser.
5.2 DHCP Server:
The integrated DHCP server allows IP addresses to be assigned to connected clients automatically. Select
Disabled if you assign the IP addresses manually in your network, and therefore do not need a DHCP server. Select
Enabled if you want to use the DHCP server. The Lease Time setting speci es how long the assigned IP address
is to apply for the client. The IP address range from which the DHCP server can assign IP addresses to clients is
restricted by the Start-IP Address and the End-IP Address.
Click SAVE at the bottom of the window to save your settings.
6 Internet Settings
In this screen, you can change the parameters for the integrated ADSL2+ modem in the router. In the Main Menu,
select the Interface Setup menu item, and then the Internet sub-item. The most important settings in this area are
explained below:
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hama 62727 - WLAN Modem Router ADSL2 plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hama 62727 - WLAN Modem Router ADSL2 plus in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info