Specifications
Link Mode—HDMI
Remark: When the resolution are 2560*1440@60Hz/3440*1440@60Hz/
1920*1080@144Hz/2560*1440@144Hz/3840*2160@30Hz connection via
DVI port, pls choose 24+1 pin double - channel DVI cables.
System Requirements
Below are the minimum system requirements for your monitor. The
requirements are recommended in order to properly use all of the monitor's
features and ensure high-quality picture.
Minimum Requirements
Operating System: Windows® 7 / Windows® 8 / Windows® 10 64-bit (latest
service pack) or higher
Processor (CPU): Intel® Core™ i5 or AMD Phenom™ II X3 or higher
Graphics Card: NVIDIA® GeForce® GTX 950 or AMD Radeon™ R9 380 or higher
Memory: 6 GB RAM
*All trademarks and registered trade names are the property of their respective owners.
All specifications and informations are subject to change without notice.
-7-
21:9
34"
(WQHD)
Default Resolution (p) and Refresh Rate (Hz)
3440x1440
(60Hz)
2560x1080
(60Hz)
1920x1080
(60Hz)
1680x1050
(60Hz)
1440x900
(60Hz)
1280x1024
(60Hz)
1024x768
(60Hz)
800x600
(60Hz)
640x480
(60Hz)
Panel Diagonal
Size
Screen Ratio
Optimum
Resolution
34"(86.36cm)
21:09
797.22 333.72*
0.07725*0.23175
3440*1440@60Hz
Environment
Temperature
Storage
Temperature
End-Use
Temperature
Humidity
Relative
Humidity
Picture Size
(mm)
Dot Pitch
(mm)
-20℃ to 45℃
0℃ to 40℃
10% to 85%
Troubleshooting
1. The screen is blank.
Be sure the power button has been pressed to turn the monitor on.
Confirm the brightness and contrast settings are set normally
Check if the Indicator Light is flashing, if so, this indicates there is no
signal from your video source
If your source is a notebook or laptop, be sure that its settings are in
mirror mode and the device itself is powered on.
2. The image is out of focus.
Ensure the video signal cable is inserted properly on both ends.
3. The screen is flashing.
Try an alternative power source as the current one causing the issue
may be insufficient or too week.
Ensure devices such as non-shielded speakers, fluorescent lighting, AC
transformers, table fans etc. are away from your screen to avoid
magnetic disturbances.
Press the Exit Key on the monitor to auto adjust the image and apply
optimum settings.
4. The color bleeds or visual effects appear unusual.
If your screen is all red, blue, or any colors disappear, check to see
that the signal cable is properly inserted. A loose connection can
cause a bad signal.
Ty connecting to another video source for comparison.
5. The screen appears to be scrolling or rolling or moving unusually.
Check that your source frequency is within 55-76Hz.
Reconnect and ensure your video source cable is secure.
6. The monitor needs cleaning.
Make sure the monitor has been powered off.
Always use a soft, non-abrasive cloth when cleaning.
Use dry, non-abrasive to gently remove debris or dust.
If necessary, lightly dampen a non-abrasive cloth with water and
gently clean the surface.
Never use alcohol or ammonia-base cleaning solutions.
Never spray liquid directly onto any part of the monitor.
All specifications and informations are subject to change without notice.
-6-
