22
Operation with a PAY-TV Decoder
❒
Operating modes
The recorder is off (stand-by mode). The PAY-TV
decoder switches automatically to the TV.
The recorder is in EE mode or record, but it is not
receiving a PAY-TV station. In this case, the deco-
der switches automatically to the TV.
Recording a PAY-TV broadcast
with simultaneous monitoring on the TV set
(e.g. programme position 4 or AV).
For this purpose you must be able to select » AV «
on any programme position at the TV (e.g.
GRUNDIG TV sets).
Select »AV« on programme position 4 or program-
me position AV on your TV set.
Recording a PAY-TV broadcast
while watching another »normal« broadcast on the
TV set.
If your TV set cannot be switched to the »normal«
TV broadcasts in this situation, please proceed as
follows:
One after another, press the
¢
CODE button, the
numbered buttons 8514 and the G
button.
If you wish to deactivate this function again, press
the
¢
CODE button, the numbered buttons
8513and the G button.
4
3
2
1
If the recorder receives coded TV programmes
from private stations, a decoder is necessary.
Ask your dealer about decoders.
❒
Connecting
Connect the EXT. 2 socket on the recorder with a
suitable socket on the decoder using EURO-AV
cable.
w
!
Pay attention to the setting for the programme
position at which the TV station of the decoder is
stored.
❒
Setting a programme position for a deco-
der
Call up the info table using the h button.
Use the DC buttons to select the » Installation «
line and call it up using the G button.
Use the DC buttons to select the » TV Station
Table« line and call it up using the G button.
– The »TV Station Table « appears.
Select a programme position for the TV station of
the PAY-TV decoder using the DC buttons. Then
press the G button.
– The »PROGRAMME « table appears.
Select the » DECODER « data line using the DC
buttons.
Activate the decoder. To do this press the E
button.
– The display changes from »OFF « to »ON«.
Store the setting using the G button.
End the setting using the
¢
8
button.
8
7
6
5
4
3
2
1
1
