ķ
21
The Telepilot TP 720 SAT supplied with the receiver can not
only be used for the satellite receiver STR 322 TWIN but also
for a large number of GRUNDIG SAT receivers and equivalent
receivers of other manufacturers.
In addition, it can be used for the remote control of a large
number of video recorders and TV sets of GRUNDIG as well
as of other manufacturers.
Certain GRUNDIG satellite receivers have 2 remote control
levels to enable a separate control of 2 receivers in the same
room. Your Telepilot also operates with this second remote
control level.
At the factory, the Telepilot has been preset so that its main
function is the control of the SAT receiver, and its second
function the control of TV sets or video recorders.
For this, it is necessary to press the
¢
TV
SAT
button (
qW
) respec-
tively the VIDEO button (
wW
) simultaneously with the desired
function button.
It is also possible to programme the remote control handset
so that its main function is the control of a TV set and its
second function the control of the SAT receiver and video
recorder.
In the following table you will find the infrared code numbers
which are necessary for changing the programming.
The factory-preset mode is marked by arrows in the table. If
the batteries are removed for a longer time or if the battery
change takes a longer time, this basic setting will automa-
tically be recovered!
You can call up the programmed code numbers on the pic-
ture screen by holding down the VIDEO button (
wW
) and
pressing in addition the
.
button (
´U
).
Example: Basic setting
Indication:
30 means: GRUNDIG video recorder IR level 1.
00 means: Main function: SAT receiver.
Second function: TV set.
90 means: GRUNDIG TV sets.
If you hold down the VIDEO button (
wW
), you can enter dif-
ferent IR code numbers with the numeric keypad and store
with the
O
button. For this, the on-screen display of the
code numbers needs not to be on. As there are no redundant
code numbers, you need not enter the entire code sequence
but only the code number for the unit you wish to control.
IR CODE 30 00 90
Universal Remote Control Handset
No. VCR transmission mode Company (not complete)
30 Grundig 10 Bit, VCR 1 Grundig, …
33 Grundig 10 Bit, VCR 2 Grundig, …
34 RCS-16, VCR 1 others
35 RCS-16, VCR 2 others
36 RC-5, VCR 1 Philips
39 RC-5, VCR 2 Philips
40 AEHA, VCR 1 Blaupunkt, …
43 AEHA, VCR 2 Blaupunkt, …
44 Matsushita, VCR 1 Blaupunkt, …
45 Matsushita, VCR 2 Blaupunkt, …
46 Thomson-neu, VCR 1 Saba, Nordmende, …
49 Thomson-neu, VCR 2 Saba, Nordmende, …
50 Thomson-alt, Modell 1
53 Thomson-alt, Modell 2
54 Thomson-alt, Modell 3
55 JVC, VCR 1 JVC, Telefunken, …
56 JVC, VCR 2 JVC, Telefunken, …
59 Nokia Nokia
60 Löwe Löwe
63 Sony, VCR 1 Sony
64 Sony, VCR 2 Sony
65 Sony, VCR 3 Sony
No. Basic level Sat/TV units
00 SAT
09 TV
No TV transmission mode Company (not complete)
90 Grundig 10 Bit Grundig...
93 RC-5 Philips, …
94 SGS Telefunken
95 Sony Sony
