14
Connecting a digital multi-channel amplifier
1 Plug a standard cinch cable into the »S/PDIF« socket on the digital
receiver and the corresponding socket on the digital multi-channel
amplifier.
Connecting a PC
1 Connect the USB cable of the PC to the »USB« socket on the digital
receiver. (Data transfer and downloading software).
Connecting a PC
1 Connect the serial cable of the PC to the »SERIAL PORT« socket (RS 232)
on the digital receiver. (Downloading software).
Connecting the mains cable
1 Plug the mains cable into the wall socket.
Inserting batteries in the remote control
1 Open the battery compartment by removing the lid.
2 Insert the batteries (Micro type, for example LR 03 or AAA, 2 x 1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control
commands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metals, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
CONNECTION AND PREPARATION
_________________
400mA Max.
400mA Max.
400mA Max.
400mA Max.
