789280
70
Verklein
Vergroot
Pagina terug
1/91
Pagina verder
70
Starting the robot lawnmower
Complete all necessary programming of the robot
lawnmower.
Press the START button (b) to start the robot
lawnmower.
If the current time is within the range from the start
time to the start time + the number of work hours for
the relevant day of the week, the robot lawnmower will
start to cut the grass.
If the time is outside this range, the robot lawnmower
will start to cut the grass. When the robot lawnmower
returns to the charging station to recharge the battery,
it remains in the charging station until the start time is
reached.
You can stop the robot lawnmower at any time by
pressing the red STOP button (3).
Press the HOME button (c) to get the robot lawnmower
to return to the charging station.
Running to the charging station
It is important that the robot lawnmower runs into the
charging station correctly when it needs charging, so
there is a specic running pattern.
When the robot lawnmower needs charging, it runs
until it registers the boundary cable. It will follow the
boundary cable all the way back to the charging station.
Error messages and troubleshooting
You can see on the display what is wrong if the robot
lawnmower has stopped.
Error message Indicates
Close cover to start 1) The control panel cover is
open
Mower trapped 2) The robot lawnmower is
stuck
Mower lifted 3) The robot lawnmower has
been lifted
Mower rolling over 4) The robot lawnmower has
rolled over
Motor over current 5) The robot lawnmower is
overloadedstes
Battery low voltage 6) Low battery voltage
Boundary signal
error
7) Boundary cable signal error
Battery temperature
abnormal
8) Abnormal battery
temperature
Battery error 9) Battery error
PCB over
temperature
10) PCB overheating
Charge error 11) Charging error
Hall error 12) Skirt error
The errors are described below.
1) The control panel cover is open
The robot lawnmower can only operate if the control
panel cover is fully closed. Put the cover down once you
have nished operating the lawnmower.
2) The robot lawnmower is stuck
The robot lawnmower reports an error if the obstacle
sensors are activated more than 5 times in one minute.
Press the OK button to re-start the robot lawnmower.
If the error occurs repeatedly, investigate whether the
boundary cable is laid out correctly, as the error often
occurs in places that are too narrow or too cramped for
the robot lawnmower to move forward after changing
direction.
Also check whether there are obstacles such as
branches, etc. that may be restricting the robot
lawnmowers freedom of movement.
70

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Grouw 17941 - M900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Grouw 17941 - M900 in de taal/talen: Duits, Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 27.59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info