15
Temperature adjustment
When commissioning the room temperature control-
ler, note that the thermo-bimetal requires a certain
amount of time to adjust to the room temperature.
This is why the switching point will deviate from the
room temperature immediately after mounting or
after night-time heating reduction switches off. The
switching point is not precise until after one to two
hours of operation. For quick initial heating and to
shorten the initial adjustment, we recommend set-
ting the selected temperature higher than desired.
Once the temperature has been reached, the tem-
perature setting can be reset to the desired setpoint.
Night-time heating reduction
We recommend performing night-time heating
reduction of approx. 4 K automatically with a time-
controlled signal.
