780045
151
Verklein
Vergroot
Pagina terug
1/249
Pagina verder
149
EN
Formation of air bubbles
You can avoid this problem by apply-
ing the brake lever before transport
and then xing it in this position using a
strap. This prevents any air from enter-
ing the hydraulic system. Please note
that the brake lever may not be pulled
when the wheel has been removed.
Place a spacer between the brake pads
if you need to remove the wheel.
Ask for detailed instructions regarding the opera-
tion and special features of the e-bike braking
system from your FLYER specialist retailer, even
if you are an experienced cyclist. Practise in a
quiet, safe area with no trafc.
If you have any questions about assembling, set-
ting up, servicing or operating this part of your
bike, please contact a FLYER specialist retailer.
A trigger point should be clearly noticeable
after approximately a third of the way
when pulling the brake lever. Do not start
to ride if the brake lever can be pulled up
to the handlebars. In this case, the FLYER
is not safe for operation. It is then essen-
tial to visit your FLYER specialist retailer
and have the brake adjusted or repaired.
Hydraulic rim brakes
Due to the wear and tear put on the brake pads,
the brake levers will eventually need to be pushed
down harder to operate. When this happens, you
may have to adjust the rim brakes. As is the case
for most bike models, this can be done by adjust-
ing a screw or a setting wheel on the brake lever.
Ask your FLYER specialist retailer for details.
Brake blocks/pads and rims are wearing parts
due to their use. Have the state of wear inspected
at regular intervals by your FLYER specialist re-
tailer. Grooves in the brake blocks and embedded
points in the rims help you determine the level of
wear. If the grooves in the brake pads or the dots
on the rims aren’t visible, it means that they are
worn out and either the brake pads or the rims
must be replaced. Always change both brake
blocks at the same time.
New rim (with points
to indicate wear)
Worn rims
Brake discs and brake pads are particu-
larly subject to wear. Have these safety-
related components regularly checked
for wear and changed as required by
your FLYER specialist retailer.
If the brake system needs to be cleaned, contact
your FLYER specialist retailer. The component
manufacturer's instructions on how to clean the
brake system are provided in the respective brake
system manual.
Only allow your FLYER specialist retailer to
maintain the brake system and change individual
brake system components. Only original spare
parts may be used. Otherwise it is possible that
the functionality of your FLYER e-bike may be im-
pacted or damaged.
Have the brake pads regularly checked accord-
ing to manufacturer specications by your FLYER
specialist retailer.
It is essential to switch off the electrical
operating system and remove the bat-
tery before any form of maintenance
work is carried out.
New brake pads Worn out brake pads
Source: Shimano® techdocs
151

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Flyer Urban - Bosch 2016 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Flyer Urban - Bosch 2016 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Noors als bijlage per email.

De handleiding is 9.39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info