674626
12
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
11
GB
use an extension cable or cable drum
with a three-core cable whose earth
wire is connected.
- If the power tool is to be used outdoors,
use only extension cables that are in-
tended for outdoor use and which are
labelled as such.
- Always unroll extension cables com-
pletely.
- Extension cables must have a conductor
cross section of at least 1.5 mm
2
.
- Damaged extension cables must not be
used but rather must be replaced.
- Protect your extension cable from sharp
edged objects or from excessive heat
and moisture or wet locations.
Stay alert
Proceed cautiously, use your common
sense and do not operate the power tool
if you are tired, if you are taking medi-
cation that makes you drowsy or if you
have consumed alcohol or drugs.
Checking of damaged parts
- The power tool should be carefully
checked before use to ensure that it is
working properly and fulfilling its in-
tended purpose.
- Check that the moving parts are cor-
rectly aligned and ensure that they are
able to move freely. Check the tools for
damaged or missing parts and if neces-
sary have these replaced or repaired at
an authorised customer support centre.
If the power tool has to be mounted
then ensure that it is safely secured on
a suitable workbench. Check all other
conditions that could have an influence
on the operation of the power tool.
- If protective coverings or other parts of
the power tool are damaged then these
should be replaced or repaired in an
authorised customer support centre in-
sofar as these operating instructions do
not specify otherwise.
Careful handling of tools
Keep cutting tools sharp and clean. This
will provide you with better results and
increased safety. Replace the damaged
parts at an authorised service centre
before using the machine.
Follow the instructions for lubrication
and for replacing accessory parts.
Check the mains cable for the tool regu-
larly. If it should be damaged then have
this replaced by an approved customer
support centre.
Check the extension cable regularly and
replace it if it is damaged.
Keep grips dry, clean and free of oil and
grease.
Take care to ensure that the ventilation
slots are always clear and free of dust.
Blocked ventilation slots can lead to
overheating and can damage the motor.
Disconnect the power tool from the
mains
Ensure that the power tool is discon-
nected from the mains when not in use,
before it is serviced or lubricated, be-
fore adjustments are carried out on it,
or when accessory parts such as blades,
drill bits and cutters are replaced.
Removal of adjustment wrenches
Make it a consistent practice to always
check that there are no adjustment
wrenches remaining on the power tool
before you switch it on.
Avoidance of unintended switching on
Ensure that the switch is in the OFF posi-
tion before you connect the power tool
to the mains.
Extension cables and cable drums
- The device should be operated via a re-
sidual current circuit breaker (RCD) with
a triggering current of max. 30 mA.
- DO NOT USE cable drums or extension
cables with a two-core cable to operate
a power tool with an earth wire. Always
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Florabest FLB 3000 A1 - IAN 109790 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Florabest FLB 3000 A1 - IAN 109790 in de taal/talen: Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info