778794
21
Verklein
Vergroot
Pagina terug
1/113
Pagina verder
8.3 Extracting fluids
Remove the filter bag before absorbing fluids
(see section 7.8). The use of a special wet filter
is recommended.
The dust extraction stops automatically when
the maximum fill level is reached.
Dry main filter and container after wet suction
ing.
CAUTION
Escaping foam and fluids
Switch off the machine immediately and
empty the dirt trap.
8.4 After finishing work
Empty the mobile dust extractor after ev
ery use and clean if necessary.
Switch off the mobile dust extractor and
pull out the mains plug.
Wind up the mains power cable.
Empty the dirt trap.
Close off the extractor opening [1-2] using
the sealing plug [1-1].
WARNING
Hazardous dust
Damage to the respiratory passage
Wipe down the mobile dust extractor and
clean all accessories thoroughly using the
extractor (inside and out) before removing
from the working area.
Parts that you were not able to clean thor
oughly must be sealed in an airtight plastic
bag prior to transportation.
Wear a dust mask!
The machine shall be stored indoors on
ly.
Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
9 Maintenance and care
WARNING
Risk of injury, electric shock
Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
All maintenance and repair work which re
quires the motor housing to be opened
must always be carried out by an author
ised service workshop.
WARNING
Electrostatic charges
Risk of explosion
Cleaning, maintenance and servicing work
may only be realised outside Zone 22.
Damaged safety devices and components must
be properly repaired or replaced in a recog
nised specialist workshop, unless otherwise in
dicated in the operating manual.
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festool.com/service
EKAT
1
235
4
Always use original Festool spare parts. Order
no. at: www.festool.com/service
Observe the following information:
Dust-related inspection (e.g. for filter dam
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
During maintenance and repair work, all
components that cannot be cleaned satis
factorily must be replaced. The old compo
nents must be sealed in impermeable plas
tic bags prior to disposal in compliance
with applicable regulations for this type of
waste.
Provided maintenance personnel or other
persons in the vicinity are not endangered,
the user must dismantle and clean the ma
chine prior to performing maintenance
work. Appropriate precautionary measures
include decontaminating the machine prior
to disassembly, making provisions for lo
cally filtered forced ventilation at the loca
tion of machine disassembly, cleaning the
maintenance area and appropriate person
al protective equipment.
English
21
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool CTL 48 E LE EC-B22 R1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool CTL 48 E LE EC-B22 R1 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3.21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info