778794
17
Verklein
Vergroot
Pagina terug
1/113
Pagina verder
When extracting large quantities of oak
or beech wood dust or dust that exceeds
the permitted limit values, only extract from a
single machine (electric or air tool).
Risk of explosion and fire hazard: Also ob
serve any other restrictions relating to dust
with an ignition energy of less than 1 mJ
specified by the labour authorities. Do not
extract sparks or hot dust, flammable or
explosive fluids (e.g. petrol, thinner), ag
gressive fluids/solids (e.g. acid, leach, sol
vent). This mobile dust extractor is suitable
for extracting paint dust.
Do not damage the mains power cable (e.g.
by driving over, dragging, etc.). Protect
from heat, oil and sharp edges. Do not pull
the plug from the socket by the cable.
Check the plug and the cable regularly and
have them replaced by an authorised serv
ice workshop should either become dam
aged. Always replace the mains power ca
ble with the type specified in the spare
parts list.
Do not expose the machine to rain.
For reasons of safety, never operate the
machine from an unearthed socket.
Always use the machine socket for the pur
pose specified in the manual.
Always use original Festool accessories.
Pull the plug from the socket when the ma
chine is not in use and prior to mainte
nance and cleaning work.
Attention! To avoid electrostatic charging
do not clean the device with a dry cloth.
Use an antistatic cloth or damp cloth.
Design 22 dust extractors are suitable for
connecting to machines in Zone 22. Care
must be taken to ensure that no sources of
ignition are extracted. Conductive machine
components, including extractor hoods,
and conductive parts on machines from
protection class II must be electrostatically
earthed. The electrostatic earthing can be
routed through the dust extractor or estab
lished using separate electrostatic earthing
equipment.
Risk of explosion: Keep the
socket on the appliance closed in zone 22
at all times and do not use it there.
Incorporate the device in your explosion
prevention or fire prevention documenta
tion.
In the event of a fire immediately discon
nect the machine from the power supply
and introduce measures according to fire
regulations.
Do not lift or transport using a crane hook
or lifting gear!
The device may only be operated if all fil
ters are present and undamaged, including
the filter for the motor cooling air.
Do not insert and remove the plug under
load.
In an emergency (e.g. short circuit or other
electrical faults occur), switch off the ma
chine and pull out the mains plug.
This machine must not be used by people
who might have a particularly adverse re
action to an electric shock (e.g. people with
cardiac pacemakers), because the possi
bility of the machine building up a static
charge cannot be excluded.
Pay attention to the work environment and
watch out for your own safety and the
safety of others when transporting or
working with the machine.
In this way, you can for example prevent
tripping hazards caused by the suction
hose or mains cable.
Use only the original Festool suction hose.
Keep packaging film away from children.
There is a risk of suffocation.
3 Technical data
Mobile dust extractors
Power consumption 150 ‑ 1100 W
Maximum appliance socket* connected load. EU (220‑240V)
ROK
2500 W
2200 W
Max. suction capacity (air), turbine 204 m³/h (3400 l/min)
Max. vacuum, turbine 23000 Pa
English
17
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool CTL 48 E LE EC-B22 R1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool CTL 48 E LE EC-B22 R1 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3.21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info