54 Ferm
CIRCULAR SAW
THE PICTURES MENTIONED IN THE TEXT ARE
CORRESPONDING WITH THE PICTURES AT
PAGE 2.
CONTENTS
1. Technical specifitions
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig. A.
1. Handgrip
2. Type plate
3. On/off switch
4. Cut depth clamping knob
5. Power cord
6. Riving knife
7. Saw blade safety guard
8. Hexagon screw
9. Soleplate
10. Retaining ring
11. Saw blade
12. Rip fence
13. Rip fence clamping knob
14. Sawing angle clamping knob
UNPACKING
The circular handsaw is shipped with:
1 Rip fence
1 TCT Saw blade Ø 160 mm
1 Allen key
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts are
present.
2. SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Danger of bodily injury or material damage.
Indicates electrical shock hazard.
CE Conforms to the applicable European safety
standards
Class II equipment – double insulated – the plug
does not have to be earthed
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corres-ponds
to the voltage on the rating plate.
The machine is double insulated in accordance
with EN50144; therefore no earth wire is required.
Replacing cables or plugs
If the mains cable becomes damaged, it must be replaced
with a special mains cable available from the
manufacturer or the manufacturer’s customer service.
Dispose of old cables or plugs immediately after
replacing them with new ones. It is dangerous to connect
the plug of a loose cable to a socket.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1200 W
No load speed | 4500/min.
Saw blade dimensions | 160x20x2.8 mm
Number of teeth | Z18
Weight | 3.96 kg
Lpa (sound pressure level) | 88.0 dB(A)
Lwa (sound power level) | 101.0 dB(A)
aw(vibration value) | 1.604 m/s2
Ferm 3
SPARE PARTS LIST FEKS-160
REF.NR. DESCRIPTION FERM NR.
409430 SWITCH 5
409431 CARBON BRUSH (SET) 23
409432 DUST CONNECTOR 29
409433 GEAR 41
409434 FLANGE (SET) 47, 49 TILL 51
409435 PARALLEL GUIDE 60
409436 SPANNER (SET) 61,62
