English
Thanks
Thank you very much for choosing for an EUROM device. You have made a good
choice! We hope you will be satisfied about its functioning.
To get maximum profit from your device, it is important to read this manual attentive and
totally before use, and to understand what is written. Read especially the safety
instructions: they are there to protect you and your environment.
Keep the manual in a safe place for future reference. Store also the package: that is the
best protection for your device in times of no-use. And if you at any time pass the
appliance on, pass on the manual and package too.
Technical data
General safety instructions
1. Before using the machine, carefully read this entire instruction manual.
2. Before using your new heater, check it, including cord and plug, for any visible
damage. Do not use a damaged heater, but send it back to your dealer for
replacement.
3. Do not use the heater until it is been fully installed in accordance with the instructions
under the heading ‘Description, Composition and Installation’.
4. This heater is strictly intended for normal domestic use. Only use it for the
(additional) heating of your home.
5. This heater is not suitable for use in wet or damp spaces such as bathrooms and
laundry rooms. Do not place the heater in the vicinity of taps, bathtub, shower, pool,
fountains or other sources of moisture. Make sure it cannot fall into water and prevent
water from getting into the heater itself. If, at any time, the heater does fall into water,
unplug it immediately! Do not use a heater that has a damp interior but have it
repaired. Never immerse the heater, cord or plug in water and never touch it with wet
hands.
6. The supply voltage and utility frequency, specified on the machine, need to match
those of the socket that is used. Only use an undamaged, earthed socket that is
secured with a 30 mA earth leakage circuit breaker. The electrical socket that you are
using must be to hand at all times in order to be able to remove the plug from the
socket in the event of an emergency
7. Fully extend the cord before plugging in the heater. Make sure it does not come into
contact with any part of the heater and prevent it from heating up any other way. Do
not run the cord underneath carpeting; do not cover it with mats, carpet strips or
similar and make sure it is not placed in any passageways. Make sure the cord
