Fix the fan to the ceiling with screws. Do not attach the fan to the central
ceiling junction box. The central ceiling junction box is not strong enough to
hold the fan.
Install the device over a central ceiling junction box. Connect the ceiling hard wiring directly
to the terminal box of the device.
1. Mark four holes on the ceiling for the
suspension bracket. Make sure the holes are
on a sturdy beam or on the concrete.
2. Check with a wire detector for wires. Make
sure not to hit any wiring when you drill the
holes in the ceiling.
3. Drill the four marked holes. Use a Ø5 mm drill
bit.
4. Place the plugs in the four holes
(Figure 4, pos. 1).
5. Use the Philips screws (Figure 4, pos. 3) and
the rings (Figure 4, pos. 4) to attach the
suspension bracket (Figure 4, pos. 2) to the
ceiling.
6. Make sure you have both hands free to make
the electrical connections:
• use a rope or tie wraps to temporarily
hang the fan on the suspension bracket,
or;
• another person holds the device up near
the suspension bracket.
7. Connect the electric wires from the central
ceiling junction box to the fan terminal box:
• Brown wire: live (Figure 5, pos. 3);
• Yellow green wire: earth (Figure 5, pos. 2);
• Blue wire: neutral (Figure 5, pos. 1).
8. Close the connection-box securely.
