provided is identified for a brick wall; for another
foundation please ask the specialist for suitable
material.
Fix the mounting bracket totally horizontal on the
wall with the four anchor dowels provided see fig.
Hang the terrace heater with the suspension
bracket in the wall bracket. Refer to the picture.
Slide the bracket through the wall bracket as far as
possible – the small hole in the bracket protrudes
under the wall bracket. Secure that terrace heater
by screwing the short wing nut supplied as far as
possible into the small hole in the suspension
bracket.
2 – Suspension from a frame (parasol, tent or similar
item) by means of a bracket
Ascertain that the frame from which you wish to
suspend the terrace heater is strong enough to
take the weight of the terrace heater for an
extended period of time.
Choose which of the three supplied brackets is
suitable for the frame. You must choose the
smallest possible option.
Slide the bracket around the frame, place the
terrace heater against it and screw the bracket to
the suspension bracket with 2 wing nuts (see
picture).
The following applies for all options:
However you install the GOLDEN AMBER FOCUS,
always lead the electrical cable
directly away from the heater. It may not become hot!
Adjust the desire radiation angle of the device. Do this by undoing both Allen screws
slightly using the Allen key. Make sure you secure them again once you have made the
adjustments! The heater can rotate through approximately 90° - with wall fastening
from 30° upwards to approximately 60° downwards. The recommended radiation
angle is 45° downwards. When adjusting the angle ensure that the radiator does not
radiate heat onto flammable materials from a short distance!
Fasten all screws another time firmly and scheck or the heater is firmly mounted. Now
your infra red heater is ready for use.
For personal protection the installation, to which the EUROM GOLDEN 2000 AMBER
FOCUS is connected, has to be equipped with an earth fall device (max. 30 mAmp).
