1. Operation panel
2. Housing
3. Vertical blinds
4. Air outlet
5. Water level glass
6. Swivel wheels
7. Handle
8. Air inlet with dust filter and
evaporation element
9. Lock button
10. Water tank
The
CoolStar 3.5 evaporates water with heat that is removed from the room and sends
the cool, humid air back into the room: a process that can be compared to wind
blowing across water.
The CoolStar 3.5 has the following functions:
- Ventilation (3 power settings)
- Ventilation and cooling (3 power settings)
- Rotation
Installation and preparation
Do not start using the air cooler until:
- all packaging is removed and placed away from children.
- all safety instructions have been observed.
- the air cooler or the plug is NOT plugged into the socket.
Turn the lock button (9) open and pull the water reservoir roughly 15 cm
backwards and fill with clean cold water; Fill the reservoir above the "MIN"- but
below the "MAX" level. Ensure that the plug does not get wet or fall into the
water tank. Never use the cooling function without sufficient water in the water
tank.