617685
86
Verklein
Vergroot
Pagina terug
1/198
Pagina verder
C
Choose a value.
Heater Temperature
The temperatures for the pre-, platen, and after
heaters can each be adjusted separately.
Note:
The standard heater temperatures are as
follows.
Set the heaters to the temperatures
recommended in the documentation
provided with the media, if available.
Raise the temperature if the print results are
blurred or smudged or the ink clots. Note,
however, that raising the temperature too
high can cause the media to shrink, wrinkle,
or deteriorate.
The time needed for the heaters to reach the
specified temperatures varies with the ambient
temperature.
(1)
Use the r/l buttons to select a heater. From
left, the options are pre-heater, platen heater,
and after heater.
(2)
After selecting the desired heater, use the d/u
buttons to choose the temperature.
(3)
After making the setting, press the Z button.
Additional Dryer
Note:
This menu is displayed only when the optional
additional print drying system (supplied with
the SC-S50600 series; optional with other
models) is installed.
The default setting is set to On, and the drying
fan turns on automatically when printing
starts.
(1)
Use the d/u buttons to select On or Off.
(2)
Press the Z button.
D
Press the y button twice to return to the
customize settings menu.
Media Adjust
This menu is used to adjust media when Auto Media
Adjust cannot be used or when reconfiguring media
settings is required due to a change made in printing
conditions after saving the media settings. In this menu,
perform Feed Adjustment and Head Alignment
individually.
Media adjustment when Auto Media Adjust cannot
be used
When you cannot adjust media using Auto Media
Adjust or when banding or graininess is detected in
printing results even after Auto Media Adjust has been
performed, select Feed Adjustment - Manual and
Head Alignment - Standard (Manual) to take
appropriate actions.
When changing printing conditions after saving
media settings
After saving media settings, select Feed Adjustment -
Auto in this menu when:
The Media Tension or Media Suction setting has
been changed in Advanced Settings;
Counterweights have been attached to or detached
from the tensioner;
The standard media unit and the optional heavy roll
media system have been switched; or
The configuration of pressure rollers have been
changed (SC-S70600 series, SC-S50600 series).
When Platen Gap has been changed, select Head
Alignment - Standard (Auto) in this menu. However, if
the setting value is changed to 2.5, auto adjustment
becomes unavailable. Perform Standard (Manual).
Change the setting values of the following items before
executing this menu.
Platen Gap
Advanced Settings
U “Customize Settings” on page 145
Feed Adjustment
This menu is used when banding (horizontal banding,
tint unevenness, or stripes) is detected in printing
results.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
86
86

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-S50600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-S50600 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installatiehandleiding - Nederlands - 56 pagina's

Epson SureColor SC-S50600 Gebruiksaanwijzing - Nederlands - 182 pagina's

Epson SureColor SC-S50600 Installatiehandleiding - Deutsch - 56 pagina's

Epson SureColor SC-S50600 Gebruiksaanwijzing - Deutsch - 217 pagina's

Epson SureColor SC-S50600 Installatiehandleiding - English, Français, Italiano, Português, Espanõl - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info