775269
13
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
78
BEFORE ASSEMBLY
1. Remove the appliance from the packaging and lay all components out on a flat surface.
2. Wash all detachable components (food pusher, hopper, auger, filter, seal, juicing chamber, pulp
container and juice container) in lukewarm water, then dry them well. Warning: to avoid the risk
of electrocution, do not immerse the motor base in water.
3. Set the appliance up following the instructions in this manual.
N.B.: ensure that the plug is not attached to the power source and that the switch is in the "O"
position.
On the bottom of the juicing chamber there is a securing seal which which may move during
cleaning operations. Remember to return it to its original position, as otherwise it will not be
possible to attach the juicing chamber to the motor base and the appliance will not work as it
should.
INSTRUCTIONS FOR ASSEMBLY
1. Position the seal at the centre of the juicing chamber, then attach the juicing chamber to the
motor base, making sure that the pins of the motor base correspond to the openings on the
chamber. See figure 1.
Figure 1
Securing seal
2. Attach the filter to the juicing chamber: make sure that the opening in the filter for pulp removal
is aligned with the chute that conveys the pulp from the juicing chamber. If assembly has been
carried out correctly, the red dots on the juicing chamber and the filter should be aligned. (see
figure 2)
N.B.: on the opposite side of the filter to the pulp removal chute, there is a protrusion which
must be slotted into the concave part of the juicing chamber.
3. Insert the shaft of the auger onto the shaft of the motor base, above the seal, see figure 3. Twist
the auger to ensure that the shaft of the motor base slots perfectly into the hexagonal opening
on the shaft of the auger.
Pulp removal
opening
Protrusion
Red
dot
Figure 3
4. Place the hopper onto the juicing chamber in such a way that the “ ” symbol on the hopper
aligns with the dot on the container, then twist the hopper clockwise following the “ ” arrow
until it is fully locked in. Lock the hopper in using the fastening clips on the right- and left-hand
sides. See figure 4.
Seal
Figure 2
Auger
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Enkho 146588.01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Enkho 146588.01 in de taal/talen: Engels, Italiaans als bijlage per email.

De handleiding is 1.22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info